Philips HTL5120/12 - User Manual

4 EN 2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit This section includes an over view of the main unit. a (Standby-On/Standby indicator) • Switch the Sound...

5 EN a (Standby-On) • Switch the SoundBar on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. b HDMI 1 Switch your source to the HDMI IN 1 connection. c HDMI 2 Switch your source to the HDMI IN 2 conne...

6 EN Rear connectors a MUSIC iLINK Audio input from an MP3 player. Bottom connectors a HDMI IN 1 Connect to the HDMI output on a digital device. b HDMI IN 2 Connect to the HDMI output on a digital device. c TO TV-HDMI OUT (ARC) Connect to the HDMI input on the TV. d AC MAINS~ Connect to the power su...

7 EN 3 Connect This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick star t guide. Note • For identification and supply ratings, refer to the type plate at the back or bottom of the product....

9 EN 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessar y connections described in the quick star t guide and the user manual. • Switch the SoundBar to the correct source for other devices. Adjust the volume1 Press +...

10 EN Night mode For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT MODE ON/OFF to turn night mode on or off. » When night mode is turned on or off, V.SURR indicator blinks once. Note • If auto volum...

12 EN 5 Wall mount your SoundBar Before you mount your SoundBar on the wall, read all safety precautions. (see 'Safety' on page 2) Wall mount Note • Improper wall mounting may result in accident, injur y or damage. If you have any quer y, contact Consumer Care in your countr y. • Secure the wall mou...

13 EN 6 Product specifications Note • Specifications and design are subject to change without notice. Amplifier • Total output power : 120W RMS (+/- 0.5 dB, 30% THD) / 96W RMS (+/- 0.5 dB, 10% THD) • Frequency response: 20 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) •...

14 EN 7 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never tr y to repair the product yourself. If you have problems using this product, check the following points before you request ser vice. If you still have a problem, get s...

15 EN 8 Notice This section contains the legal and trademark notices. Compliance This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations, declares that this product is in compliance with the essential requirements and other relevant provisio...