Philips BT100B/37 - User Manual

5 EN Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This product may contain lead and mercur y. Disposal of these materials may be regulated due to environmental considerations. For disp...

6 EN 2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • listen to audio from an external device via Bluetooth connection,...

7 EN Overview of the speaker a Battery/Bluetooth indicator • Lights up, flashes or turns off depending on the status of BT100. • For details, see the following section Charging indicator and Bluetooth indicator. b Integrated microphone c • Press to answer an incoming call. • Press to end the current...

8 EN 3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery BT100 is powered by a built-in rechargeable batter y. Note • Before use, fully charge the built-in batter y. Connect the USB cable between • the DC IN socket on the speaker, and • a USB socket ...

9 EN Charging indicator Indicator Battery In Bluetooth mode Flashing blue/Solid blue (depending on the working status) Under charging Flashing blue/Solid blue (depending on the working status) Fully charged In AUX IN mode Flashing white Under charging Solid white Fully charged In OFF mode Flashing w...

10 EN 4 Use Bluetooth devices With this speaker, you can listen to audio from a player and make a call through Bluetooth. Note • Make sure that no audio input cable is connected to the AUX socket. • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device wi...

11 EN Disconnect a device • On your device, disable the Bluetooth connection with BT100 . • Or, on BT100 , press and hold when it is not during a call. Note • Before connecting another Bluetooth device, disconnect the current device first. Reconnect a device • For a paired Bluetooth device on which ...

12 EN Make a call Button functions in Bluetooth mode Buttons Status Functions Incoming call Press to answer an incoming call. Press and hold for more than 3 seconds to reject an incoming call. During a call Press to end the current call. Press and hold for more than 3 seconds to transfer call betwee...

13 EN 5 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through BT100 . 1 Connect an audio input cable with a 3.5 mm connector on both ends to • the AUX socket on this product, and • the headphone socket on the external device. 2 Switch the slid...

14 EN 6 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2W RMS Signal to Noise Ratio >70dB Aux-in Link 300 mV RMS, 10 kohm Bluetooth Bluetooth specification V3.0 +EDR Suppor ted Profiles HFPv1.5, AD2Pv1.2 Advanc...

15 EN 7 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips ...

16 EN About Bluetooth device The audio quality is poor after connection with a Bluetooth-enabled device. • The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Cannot connect with the device. • The Bluetooth function of the device is not enable...