Page 2 - Functional overview; Index; English
> 4-5 Packaging contents 4Optional accessories 5Ser vice accessories 5 6-11 Controls 6-9Remote control 10Connections 11 12-14 Positioning the projector and screen 12 Switching the projector on and off 12 Adjusting the focus and size of the image 13Adjusting the ver tical angle of the projector 13...
Page 4 - Packaging contents
> Congratulations on your purchase of one of the most sophisticated and reliable products on themarket today. We are sure that, used properly, it will bring you years of enjoyment. You will wantto keep this manual handy, as it is a convenient source of information about your projector.For your ow...
Page 5 - Optional accessories
The following accessories are available via the dealer from whom you purchased your Philips projector : • LCA 3123/00 - 200 W replacement lamp - 8670 931 23009 • LCA 2211/00 - Ceiling mount - 8670 922 11009 • LCA 5310/00 - Monitor Y-cable - 8670 953 10009 • LCA 5300/00 - VGA extension cable (15 m) -...
Page 6 - Keystone; Note; Controls
> Mutes sound and picture of the projector. Selects the current projection source: Auto, RGB sync, YPbPr, RGB sog, S-Video, Video,Mutimedia, Wireless (only available on cClear Wireless version), DVI-RGB, DVI-YPbPr. The button toggles between the nine/ten signals. Adjusts the volume. Activates and...
Page 7 - Focus ring
Adjusts the focus of the projected image. Adjusts the size of the projected image. Focus ring @ Zoomring # 2. Functional overview Philips Multimedia Projector 7 English User guide cClear Controls > @ # 0 4 5 Menu OK AV Mute Source Stand by Lamp Temp Menu OK AV Mute Source Stand by Lamp Temp 7 8 9...
Page 8 - Power indicator
cClear Wireless version only Lights up green when wireless operation is activated. Lights up green when the projector operates in a wireless network. Lights up green when wireless connection has been made. Resets all network settings to the default settings The Reset button is recessed to prevent ac...
Page 9 - Height/Level adjuster
< To adjust the ver tical angle of the projector. To connect the projector to the mains. To inser t an optional locking device (Kensington lock). Height/Level adjuster # Dust filter $ Mains inlet socket % Lock slit ^ Lamp compartment & 2. Functional overview Philips Multimedia Projector 9 Eng...
Page 10 - Activates the laser pointer to indicate items on the screen.; Window Mode; Remote control
Philips Multimedia Projector 10 English User guide cClear 2. Functional overview Activates the laser pointer to indicate items on the screen. Note: The laser pointer sends out a laser beam. Do not look into this beam! Function as the Left and Right mouse keys of your pc when USB or PS/2 connection h...
Page 11 - USB; Audio Out; Connections
Data source connections Input socket to connect to the analog (VGA) Data out terminal of a computer. Input socket to connect to the digital (DVI) Data out terminal of a computer. Input sockets to connect to the Audio out terminal of the computer connected to Data 2 orData 1(DVI). In-/Output socket t...
Page 12 - Positioning the projector; Front projection
Philips Multimedia Projector 12 English User guide cClear 3. Set up > • Place the projector on a stable, level surface, out of direct sunlight and away from sources ofexcessive dust, dir t, heat, water, moisture, vibration and strong magnetic fields. • Allow sufficient cooling of the product by k...
Page 13 - Adjusting the focus and
6 To switch off the mains supply completely, disconnect the mains lead. – Save energy! Please put the projector in the Power/Standby position if you are not going to usethe projector for more than 15 minutes. – When no signal inputs are detected for 30 minutes, the projector automatically switchesto...
Page 14 - Moving/transporting the
Preparation 1 Press the Standby button twice to put the projector in Power/Standby. – The Standby indicator star ts blinking orange. 2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put inStandby) and disconnect the mains lead and all other cables. 3 Put the len...
Page 15 - General information
Computer input The computer input is suitable for both Apple Macintosh computers (Power Book and Power Mac) aswell as for IBM compatible PCs. The projector is Microsoft (R), Windows (R) 95/98/ME/2000/XPcompatible and accepts input signals from all computers that meet following specifications:• Multi...
Page 16 - Notes; CAUTION
– Mouse control and ‘drag and drop’ is also possible when PS/2 connection has been made. – Based on the specific hardware and software configuration available, Apple Macintosh computer userscould experience incomplete or erratic USB -functionality. These problems are not related to theperformance of...
Page 17 - Connecting to a computer; Analog connection
Philips Multimedia Projector 17 English User guide cClear > 1 Connect the Data (out) socket of the computer to the Data 2 socket of the projector and secure the plugs by tightening the thumb screws.For this, use the VGA/USB cable supplied (1a) . 2 Connect the USB/USB Audio (upstream) socket of th...
Page 19 - Digital connection
1 Connect the DVI (out) socket of the computer to the Data 1 (DVI) socket of the projectorand secure the plugs by tightening the thumb screws.For this, use the DVI cable supplied (4) . 2 Connect the USB/USB Audio (upstream) socket of the projector to the USB downstream por t of the computer.For this...
Page 20 - CVBS; Connecting to video equipment
> 1 Connect the Video (out) socket of a VCR, Laser Disc player, video camera or TV to the CVBS (Video in) socket of the projector. For this, use the video/audio connection cable (1a) supplied. 2 Connect the Audio out L/R sockets of the VCR, Laser Disc player, video camera or TV to the Video/Audio...
Page 22 - Scart connection
< RGBS 1 Connect an optional Scar t/RCA Component Video adapter (1) to the Scar t connector of your Component- or HDTV-video equipment 2 Connect the Component in sockets of the projector (Pr/Cr, Y, Pb/Cb) to the R, G and B outputs of the adapter.For this, use the audio/video connection cable supp...
Page 23 - Connecting to audio equipment
1 Connect the Audio in L/R sockets of an amplifier or stereo system to the Audio Out socketof the projector.For this use an optional audio/video connection cable (1) . 2 Press Menu. – The menu bar appears on the screen 3 Use Cursor Control to move to ‘Audio’. 4 Select ‘Audio Out’ using Cursor Contro...
Page 24 - General; Messages; Press the Standby button on projector or remote control; Preparation
General Notes Messages > 1 Press the Standby button on projector or remote control to switch on the projector. – The Standby indicator lights up orange. – When the projection lamp is on, the Standby indicator lights up green and the star t-up screen (when enabled) appears for several seconds. 2 S...
Page 26 - Main menu; Brightness; Display; Menu tree; On Screen Display Menu
Philips Multimedia Projector 26 English User guide cClear > All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays and with help of Menu, OK and Cursor Control on the projector or the remote control.The projector is set to standard settings at the factor y. ...
Page 28 - GENERAL ADJUSTMENTS/SETTINGS; SV10 and XG1 Brilliance versions only)
Philips Multimedia Projector 28 English User guide cClear GENERAL ADJUSTMENTS/SETTINGS Main menu Sub menu Setting Settings Language DeutschEnglishFrançaisEspañolItalianoNederlandsPor tuguês ∑ Keystone Smar tDimmer On Off Source AutoRGB syncYPbPrRGB sogS-VideoVideoMutimediaWireless (only available on...
Page 29 - General explanation
> 1 Press Menu. – The menu bar appears on the screen. The first item is highlighted and its sub menu is shown. Depending on the selected source (Auto, RGB sync, YPbPr, RGB sog, S-Video, Video,Mutimedia, Wireless (only available on cClear wireless version), DVI-RGP, DVI-YPbPr.) some options of the...
Page 30 - Picture adjustments; Tip for Windows users; Display adjustments; Computer adjustments
> For computer signal input, the following ‘Picture’ and ‘Display’ adjustments can be made. Picture adjustments • Press Menu and select ‘Picture’ in the menu bar. The following ‘Picture’ adjustments can nowbe made, following the instructions under ‘General explanation’: – Brightness adjusts brigh...
Page 31 - adjustments
> – Zoom enlarges a par t of the picture; – Auto image automatically sizes and positions the image to fit optimally in the screen picture; – Horizontal size adjusts the computer image in a horizontal direction to make the image completely fill thescreen; – Phase minimises picture imperfections. W...
Page 34 - Examples
> The following settings/adjustments follow a slightly different procedure or may need somefur ther explanation. Digital Zoom/Magnification ‘Digital Zoom’ is used to enlarge a par t of the picture. 1 Press Menu. – The menu bar appears on the screen. 2 Use Cursor Control to select ‘Zoom’ in the Di...
Page 36 - Possible combinations
The following over view tells you which projection sources can (+) and cannot (–) be combinedin PIP or Double window mode. Current projection source Second source + / – (in PIP window or second window) CVBS (2) S-Video – R, G, B/CVBS – Y, Cb, Cr – Y, Pb, Pr + Data 2 – Data 1 (analog) + Data 1 (digit...
Page 39 - General adjustments/settings; following the
Loading your own personal start-up screen (for bSure2 Brilliance projectors only) All settings described under ‘ General adjustments/settings ’ can be made, following the instructions under ‘On Screen Display Menu - General explanation’. Loading your own personal star t-up screen however follows a s...
Page 41 - Cleaning; Caution
> Switch off and disconnect the projector before cleaning. 1 Press the Standby button twice to switch off the projector. – The Standby indicator star ts blinking orange. 2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put inStandby) and disconnect the mains ...
Page 42 - Lamp
> When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning:lamplife has almost expired’ will be displayed on the screen, each time the projector is switchedon. The lamp indicator lights up orange. The lamplife remaining can be checked using the OSD menu. 1 Pres...
Page 44 - Warning; Problem; Image is not or incorrectly
> If a fault occurs, first check the points listed below before taking the projector for repair.If you are unable to solve a problem by following these hints, consult your dealer or ser viceorganisation. Under no circumstances should you tr y to repair the projector yourself as this could invalid...
Page 45 - Poor colour
> In Data mode – Input resolution is too high (and keystoning is applied). • If you wish to keep the keystone correction, decrease the input resolution until the image iscorrectly displayed. For this, refer to the User Guide or suppor t information of thecomputer. • If you wish to keep the input ...
