Page 3 - Contents
1 EN Contents 1 Important 2 Safety 2 2 Your micro system 3 Introduction 3 What's in the box 3 Over view of the main unit 4 Over view of the remote control 5 3 Get started 7 Place the device 7 Connect FM antenna 7 Connect power 7 Prepare the remote control 8 Set clock 8 Turn on 8 4 Play 9 Play in sin...
Page 4 - Important; Safety; Hearing safety
2 EN 1 Important Safety • Make sure that there is enough free space around the product for ventilation. • Only use attachments or accessories specified by the manufacturer. • Batter y usage CAUTION – To prevent batter y leakage which may result in bodily injur y, proper ty damage, or damage to the p...
Page 5 - Introduction
3 EN 2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, Bluetooth-enabled devices, USB storage devices,...
Page 6 - Overview of the main unit
4 EN Overview of the main unit a • Turn the unit on or off. • Switch to standby mode or ECO mode. b SOURCE • Press to select a source: DISC, USB, TUNER, BT, AUDIO IN. c PAIRING • In Bluetooth mode, press and hold for 3 seconds to enter pairing mode. d SET/OK • Confirm the selection. e / • Select a p...
Page 9 - Get started; Place the device; Connect FM antenna; Connect power
7 EN 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial ...
Page 10 - Prepare the remote control; Set clock; Turn on; Switch to standby mode
8 EN Prepare the remote control Caution • Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 Open the batter y compar tment. 2 Inser t the supplied AAA batter y with correct polarity (+/-) as indicated. 3 Close ...
Page 11 - Play in single mode; Play from disc; Play from USB
9 EN 4 Play Play in single mode Single mode: Single mode means that the speaker is not grouped with any other izzylink- compatible multiroom speakers. Instead, it is used as a standalone speaker. Play from disc Note • Make sure that the disc contains playable audio content. 1 Press CD to select the ...
Page 12 - Program tracks; Play from Bluetooth-enabled devices
10 EN Control playback / Select a folder. / Press to skip to the previous or next track. Press and hold to search backward/ forward within a track.Pause or resume playback.Stop playback.Play a track or all tracks repeatedly.Play tracks randomly(Not applicable for the programmed tracks). Skip to a tr...
Page 14 - Listen to the radio
12 EN Listen to the radio Tip • Position the antenna as far as possible from TV or other radiation sources. • Make sure that you have connected the supplied FM antenna. • For optimal reception, fully extend and adjust the position of the antenna. Tune to a radio station 1 Press FM / AUDIO IN repeate...
Page 15 - Play in group mode; Create a group; Play from the master to the whole group
13 EN Play in group mode Group mode: If you have more than one izzylink-compatible multiroom speakers, you can create a group and stream music to the group of speakers at the same time. To use this feature, you need to purchase more than one izzylink-compatible multiroom speakers. Note • You can cre...
Page 16 - Change master
14 EN Change master You can change the current master in a group easily. For example, in Bluetooth mode, when your mobile phone loses connection with the current master speaker, you can set the closest slave speaker as the master. • Press any source key on a slave speaker to change it to be the mast...
Page 17 - Reset group status
15 EN Reset group status • In case of any grouping issues, hold GROUP for 8 seconds to reset..
Page 18 - Adjust sound; Select a preset sound effect
16 EN 5 Adjust sound The following operations are applicable to all suppor ted media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • Balanced (Balanced), Warm (Warm), Bright (Bright), Clear (Clear), and Powerful (Powerful). Adjust volume level • On the remot...
Page 19 - Other features; Set the alarm timer; Set the sleep timer; Listen from an external device
17 EN 6 Other features Set the alarm timer This unit can be used as an alarm clock. You can select DISC , USB , or TUNER as the alarm source. Note • Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/ TIMER for 3 seconds. 2 Press / repeatedly to select an alarm ...
Page 21 - Specifications; Amplifier
19 EN 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 20 W RMS Frequency Response 63 -20KHz, +/-3dB Total Harmonic Distor tion <1%(1 KHz) Signal to Noise Ratio (A-weighted) >72dBA AUDIO IN 650mV RMS 22k...
Page 23 - Troubleshooting
21 EN 8 Troubleshooting Warning • Never remove the casing of this unit. To keep the warranty valid, never tr y to repair the unit yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web ...
Page 25 - Notice; Declaration of conformity
23 EN 9 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requiremen...
Page 26 - Written offer
24 EN Note • The type plate is located on the back of the device. Written offer Gibson Innovations Limited hereby offers to deliver, upon request, a copy of the corresponding source code for the open source software packages used in this product for which such offer is requested by the respective li...
