Philips BM50B/10 - Manuals

4 EN Overview of the main unit a • Turn the unit on or off. • Switch to standby mode or ECO mode. b SOURCE • Press to select a source: DISC, USB, TUNER, BT, AUDIO IN. c PAIRING • In Bluetooth mode, press and hold for 3 seconds to enter pairing mode. d SET/OK • Confirm the selection. e / • Select a p...

7 EN 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial ...

8 EN Prepare the remote control Caution • Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 Open the batter y compar tment. 2 Inser t the supplied AAA batter y with correct polarity (+/-) as indicated. 3 Close ...

9 EN 4 Play Play in single mode Single mode: Single mode means that the speaker is not grouped with any other izzylink- compatible multiroom speakers. Instead, it is used as a standalone speaker. Play from disc Note • Make sure that the disc contains playable audio content. 1 Press CD to select the ...

10 EN Control playback / Select a folder. / Press to skip to the previous or next track. Press and hold to search backward/ forward within a track.Pause or resume playback.Stop playback.Play a track or all tracks repeatedly.Play tracks randomly(Not applicable for the programmed tracks). Skip to a tr...

12 EN Listen to the radio Tip • Position the antenna as far as possible from TV or other radiation sources. • Make sure that you have connected the supplied FM antenna. • For optimal reception, fully extend and adjust the position of the antenna. Tune to a radio station 1 Press FM / AUDIO IN repeate...

13 EN Play in group mode Group mode: If you have more than one izzylink-compatible multiroom speakers, you can create a group and stream music to the group of speakers at the same time. To use this feature, you need to purchase more than one izzylink-compatible multiroom speakers. Note • You can cre...

14 EN Change master You can change the current master in a group easily. For example, in Bluetooth mode, when your mobile phone loses connection with the current master speaker, you can set the closest slave speaker as the master. • Press any source key on a slave speaker to change it to be the mast...

15 EN Reset group status • In case of any grouping issues, hold GROUP for 8 seconds to reset..

16 EN 5 Adjust sound The following operations are applicable to all suppor ted media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • Balanced (Balanced), Warm (Warm), Bright (Bright), Clear (Clear), and Powerful (Powerful). Adjust volume level • On the remot...

17 EN 6 Other features Set the alarm timer This unit can be used as an alarm clock. You can select DISC , USB , or TUNER as the alarm source. Note • Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/ TIMER for 3 seconds. 2 Press / repeatedly to select an alarm ...

19 EN 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 20 W RMS Frequency Response 63 -20KHz, +/-3dB Total Harmonic Distor tion <1%(1 KHz) Signal to Noise Ratio (A-weighted) >72dBA AUDIO IN 650mV RMS 22k...

21 EN 8 Troubleshooting Warning • Never remove the casing of this unit. To keep the warranty valid, never tr y to repair the unit yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web ...

23 EN 9 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requiremen...

24 EN Note • The type plate is located on the back of the device. Written offer Gibson Innovations Limited hereby offers to deliver, upon request, a copy of the corresponding source code for the open source software packages used in this product for which such offer is requested by the respective li...