Page 3 - Contents
1 7 Connect devices 20 Back connector 20 Side connector 21 Connect a computer 22 Use Philips EasyLink 23 Use a Kensington lock 24 8 Product information 25 Suppor ted display resolutions 25 Multimedia 25 Tuner/Reception/Transmission 25 Remote control 25 Power 25 Suppor ted TV mounts 26 Product speci ...
Page 4 - Notice
2 Copyright All other registered and unregistered trademarks are the proper ty of their respective owners. ® Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Por tions of this...
Page 5 - Important; Safety
3 Risk of injury or damage to the T V! Two people are required to lif t and carr y • a T V that weighs more than 55 lbs. When stand mounting the T V, use only • the supplied stand. Secure the stand to the T V tightly. Place the T V on a at, level sur face that can suppor t the combined weight of the...
Page 6 - Screen care
4 Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is at tached to a product it means that the product is covered by the European Directive 20 02...
Page 7 - Remote control; Your; Side controls and indicators
5 Remote control a ( Standby-On ) Switches the T V to standby if it is on. • Switches on the T V if it is in standby. • b MENU Toggles the main menu on or off. c INCR . SURR Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources. 1 4 6 9 10 11 12 13 7 8 2 3 21 22 17 16...
Page 8 - Remote control usage
6 s T V/PC Toggles between PC mode and previously viewed video mode. t SLEEP Sets a delay af ter which the T V switches to standby. u FORMAT Toggles through available picture formats. Some formats are not available for some picture sources. v DEMO Toggles the demonstration menu on or off. Remote con...
Page 9 - Switch channels; Switch channels with the channel grid; Use
7 Switch channels Press • CH +/- on the remote control or P/CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Press • OK to use the channel grid. Press • BACK A /CH on the remote control to return to the previous channel. Note When you use a favourite list, you can ...
Page 10 - Adjust TV volume; Watch connected devices; Use the source button
8 Adjust TV volume To increase or decrease volume Press • +/- . To mute or unmute sound Press • to mute the sound. Press • again to restore the sound. Watch connected devices Note Switch on the device before selec ting it as a • source on the T V. Use the source button 1 Press SOURCE . The source li...
Page 11 - Use smart picture; Use more of; Access TV menus
9 Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 Press MENU . 2 Press to select a device to remove. 3 Press OPTIONS . The » [Remove device] list appears. 4 Press OK , then select [Remove] to remove the device. The selected device is re...
Page 12 - Change picture format; Summary of picture formats; Manually adjust picture settings
10 Change picture format 1 Press FORMAT . A picture format bar appears. » 2 Press to select a picture format. The selected picture format is activated. » 3 Press OK to con rm your choice. Summary of picture formats The following picture settings can be con gured. Note Depending on the for mat of the...
Page 13 - Select a favorite list; Add a channel to a favorite list
11 • [Surround] : Enables spatial sound. • [Auto volume] : Automatically reduces sudden volume changes, for example, when switching channels. • [Delta volume] : Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume. Cre...
Page 14 - Use timers; Remove a channel from a favorite list; Use the TV clock; Set the TV clock
12 Note To disable the clock , repeat the above • procedure. Use timers You can set timers to switch the TV to standby at a speci ed time. Tip Set the T V clock before you use timer s. • Automatically switch the TV to standby (sleep timer) Sleep timer switches the T V to standby af ter a pre-de ned ...
Page 15 - Lock or unlock the TV; Lock or unlock one or more channels; Use TV locks; Set or change your PIN code
13 Lock or unlock the TV Lock the T V to prevent access to all channels and connected devices. 1 Press MENU . 2 Press to select [Setup] > [Features] > [T V lock] . You are prompted to enter your PIN » code. 3 Enter your code with the Numeric buttons . The » [TV lock] menu appears. 4 Press to s...
Page 18 - Update using a USB device; Change TV preferences; Disconnect a USB storage device; Update the TV software; Check the current software version; Download the software
16 Update using a USB device Connect your USB device to the USB por t at the side of your T V. 1 If the sof tware update screen does not appear automatically, select [Setup] > [Software update] > [Local updates] . 2 Press OK to update the T V sof tware manually. 3 Follow the on-screen instruct...
Page 19 - Start a TV demo
17 Start a TV demo You can use demonstrations to bet ter understand the features of your T V. Some demos are not available on cer tain models. Available demos are displayed in the menu list. 1 Press DEMO on the remote control. 2 Press to select a demo and press OK to view it. 3 Press BACK to exit. R...
Page 20 - Manually install channels; Select your system; Fine tune analog channels; Install; Select TV tuner; Automatically install channels
18 Manually install channels This section describes how to search and store analog TV channels manually. Select your system Note Skip this step if your system set tings are • cor rec t. 1 Press MENU . 2 Press to select [Setup] > [Installation] > [Channel install.] > [Manual install] . The »...
Page 21 - Rearrange channels; Skip channels; Rename channels
19 Tip The device name can be up to six char ac ter s • long. Press • [Aa] to change uppercase let ter to lowercase let ter and vice ver sa . Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 When watching T V, press OK to display the channel grid. 2 ...
Page 22 - Connect; Back connector
20 a T V ANTENNA Signal input from an antenna, cable or satellite. b AUDIO OUT Analog audio output to home theaters and other audio systems. c CVI 1 / CVI 2 ( Y Pb Pr and AUDIO L /R ) Analog audio and video input from analog or digital devices such as DVD players or game consoles. TV ANTENNA AUDIO O...
Page 23 - Side connector
21 Side connector a AUDIO L /R Audio input from analog devices connected to VIDEO . d PC IN ( VGA / PC and AUDIO IN ) Audio and video input from a computer. e HDMI 1 / HDMI 2 Digital audio and video input from high-de nition digital devices such as Blu-ray players. Connections via DVI or VGA require...
Page 24 - Connect a computer
22 Connect a computer Before you connect a computer to the TV Set the monitor refresh rate on your • computer to 60Hz. Press • FORMAT and change the T V picture format to [Unscaled] . Connect a computer with one of the following connectors: Note Connec tions via DVI or VGA require an • additional au...
Page 25 - Use Philips EasyLink; EasyLink features
23 Use Philips EasyLink Your T V suppor ts Philips EasyLink , which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note The EasyLink-compliant device must be • switched on ...
Page 26 - Use a Kensington lock; Enable or disable EasyLink; Use one-touch play
24 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not • intend to use it. 1 Press MENU...
Page 27 - Multimedia; Product; Supported display resolutions
25 Multimedia Suppor ted storage device: USB (Only • FAT 16 or FAT 32 USB storage devices are suppor ted) Suppor ted multimedia le formats: • Images: JPEG • Audio: MP3 • Note Multimedia le names must not exceed 128 • char ac ter s. Tuner/Reception/Transmission Antenna input: 75ohm coaxial (IEC75) • ...
Page 28 - Product speci cation; Supported TV mounts
26 Product speci cation Design and speci cations are subject to change without notice. 32PFL3605 Without T V stand • Dimension ( WxHxD): 795.6 x 508.3 • x 93 (mm) Weight: 8.3 kg • With T V stand • Dimension ( WxHxD): 795.6 x 556.2 • x 221. 5 (mm) Weight: 9.9 kg • 32PFL3615 Without T V stand • Dimens...
Page 29 - Troubleshooting; General TV issues
27 Cannot remove ‘e-sticker’ banner displayed on the TV. To remove the logos and images, set the • location of your T V to home. 1. Press MENU . 2. Select [Setup] > [Installation] > [Preferences] > [Location] . 3. Select [Home] , then press OK . TV channel issues Previously installed channe...
Page 30 - Computer connection issues; Contact us; Sound issues; HDMI connection issues
28 If there are intermit tent sound • disruptions, check that output set tings from the HDMI device are correct. If you use an HDMI-to-DVI adapter • or HDMI to DVI cable, check that an additional audio cable is connected to AUDIO IN (mini-jack only). Computer connection issues The computer display o...
Page 31 - 0 Index
29 D default settings 17 demo 17 devices 8 devices add to home menu 9 remove 9 watch 8 digital services disconnect USB 16 display resolution 25 dispose 4 E EasyLink disable 24 enable 24 one-touch play 24 one-touch standby 24 system audio control 24 end of life 4 environmental care 4 e-sticker 16 F f...
Page 35 - philips
philips Dali_77_warranty.indd 4 4/6/2010 11:58:34 AM Downloaded From TV-Manual.com Manuals
