Page 3 - Contents
1 6 Install channels 26 Automatically install channels 26 Manually install channels 27 Rename channels 28 Rearrange channels 28 Test digital reception 28 7 Connect devices 29 Back connector 29 Side connector 31 Connect a computer 32 Use a Conditional Access Module 33 Use Philips EasyLink 34 Use a Ke...
Page 4 - Notice
2 Pixel characteristics This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industr y stan...
Page 6 - Important; Safety
4 When stand mounting the T V, use only • the supplied stand. Secure the stand to the T V tightly. Place the T V on a flat, level sur face that can suppor t the combined weight of the T V and the stand.When wall mounting the T V, use only a • wall mount that can suppor t the weight of the T V. Secure...
Page 7 - Screen care
5 Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is at tached to a product it means that the product is covered by the European Directive 20 02...
Page 9 - Remote control; Your; Side controls and indicators
7 Remote control 1 22 45 7 6 10 11 12 13 14 8 9 2 3 21 18 17 16 15 20 19 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your TV at www.philips.com/welcome. This section gives you an over view of commonly used TV con...
Page 10 - Remote control usage
8 o SOUND (Smart Sound) Launches the sound menu. p +/- ( Volume +/-) Increases or decreases volume. q BACK P/P (Previous channel) Returns to a previous screen. • Returns to the previously viewed • channel. r GUIDE Switches between channel grid and programme list. s SUBTITLE (For RF Digital T V only)...
Page 11 - Switch channels; Switch channels with the channel grid; your
9 Switch channels Press • P +/- on the remote control or P/CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Press • OK to use the channel grid. Press • BACK P/P on the remote control to return to the previous channel. Note When you use a favourite list, you can onl...
Page 12 - Use teletext; Watch connected devices; Use the source button; Adjust TV volume
10 Use teletext 1 Press MHEG/TELETEXT . The main index page appears. » 2 Select a page as follows: Press the • Numeric buttons to enter a page numberPress • P +/- to view the nex t or previous pagePress the • Colour buttons to select a colour coded itemPress • BACK to return to a previously viewed p...
Page 13 - Use more of; Access TV menus
11 Rename devices from the home menu After adding a new device to the home menu, you can rename it to your preference. 1 Press MENU . 2 Press to select a device to rename. 3 Press OPTIONS . The options menu appears. » 4 Press to select [Rename device] , then press OK . A text input box appears. » 5 ...
Page 14 - Manually adjust picture settings; Use settings assistant; Use smart picture
12 • [Energy saving] : Applies low-energy set tings. • [Natural] : Applies the best picture quality. • [Custom] : Lists customised picture set tings. 3 Press OK to confirm your choice. The selected smar t picture setting is » applied. Manually adjust picture settings 1 Press MENU . 2 Press to select ...
Page 15 - Change picture format; Summary of picture formats
13 [Auto format] : (Not for PC mode.) Enlarges the picture automatically to best fit the screen. The subtitles remain visible. [Super zoom] : (Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distor tion. [4:3] : Shows the classic 4:3 format. [Subtitle z...
Page 16 - Use smart sound; Manually adjust sound settings
14 • [Balance] : Adjusts the balance of the right and lef t speakers. • [Audio language] : Available for digital channels, when multiple languages are broadcast. Lists available audio languages. • [Dual I-II] : Selects audio languages if dual sound broadcast is available. • [Mono/Stereo] : Selects m...
Page 18 - Select a favourite list; View all channels
16 Create and use list of favourite channels You can create a list of your preferred TV channels so that you can find those channels easily. Select a favourite list 1 When watching T V, press OK to display the channel grid. 2 Press OPTIONS . The channel options menu appears. » 3 Press to select [Sele...
Page 19 - Switch on EPG; Use EPG; Add a channel to a favourite list
17 Use the Electronic Programme Guide EPG is an on-screen guide available for digital channels. EPG allows you to: View a list of digital programmes being • broadcastView upcoming programmes • Group programmes by genre • Set reminders when programmes star t • Set up preferred EPG channels • Switch o...
Page 20 - Display the TV clock; Change the clock mode; Use the EPG options menu; Use the TV clock; Set the TV clock manually
18 3 Press to enter time. 4 Select [Done] to confirm. 5 Press MENU to exit. Note If your selec ted countr y suppor ts digital • broadcast, the clock displays the time data from your T V ser vice oper ator as priority. Display the TV clock 1 When watching T V, press OPTIONS . The TV option menu appear...
Page 21 - Use daylight saving; Use timers
19 4 Press OK to switch on the sleep timer. The TV switches to standby after the » specified time. Automatically switch the TV on (on timer) You can switch on the T V from standby to a specific channel at a specified time. 1 Press MENU . 2 Press to select [Setup] > [Features] > [On timer] . 3 Pre...
Page 22 - Lock or unlock one or more channels; Set parental ratings; Use TV locks; Set or change your PIN code; Lock or unlock the TV
20 Lock or unlock one or more channels 1 When watching T V, press OK to display the channel grid. 2 Press to select a channel to lock or unlock . 3 Press OPTIONS . 4 Press to select [Lock channel] or [Unlock channel] . 5 For each selection, press OK to lock or unlock the channel. The first time you l...
Page 23 - Use subtitles; Enable subtitles on digital TV channels
21 Select a subtitle language on digital TV channels Note When you selec t a subtitle language on • a digital T V channel as described below, the prefer red subtitle language set in the installation menu is tempor arily over r uled. 1 Press MENU . 2 Press to select [Setup] > [Features] > [Subt...
Page 24 - View photos
22 View a slide show of your photos 1 When a full screen image of a photo is displayed, press OK . A slide show begins from the selected » photo. 2 Press the following but tons to control the slide show:• OK to pause the slide show. • to go back or move for ward to the nex t image. • BACK to stop th...
Page 25 - Disconnect a USB storage device; Listen to music
23 Disconnect a USB storage device Caution Follow this procedure to avoid damage to your • USB stor age device. 1 Press BACK to exit the USB browser. 2 Wait for five seconds then disconnect the USB storage device. Listen to digital radio channels If digital broadcasting is available, digital radio ch...
Page 26 - Update using OAD; Change TV preferences; Update the TV software; Check the current software version; Download the software
24 Update using OAD 1 If using (DVB -T ) digital broadcast, your T V automatically receives sof tware updates. If you receive a message on your screen asking you to update your sof tware: Select • [Update now] to update the sof tware immediately.Select • [Remind me later] to exit the update screen a...
Page 27 - Start a TV demo; Set decoder channel
25 8 Press OK . 9 Press MENU to exit. Note Selec t • [None] if you do not want to map to the decoder / descr ambler channel. Start a TV demo You can use demonstrations to bet ter understand the features of your T V. Some demos are not available on cer tain models. Available demos are displayed in th...
Page 28 - Install; Automatically install channels; Step 1 Select your menu language
26 Step 3 Install channels Automatically installs the available analogue and digital T V channels and digital radio channels. 1 From the channel installation guide screen, select [Full installation] . 2 Press OK to confirm. The TV star ts to search and store all » the available channels. 3 When insta...
Page 29 - Step 3 Fine-tune analogue channels; Manually install channels; Step 1 Select your system
27 6 Press BACK when the new channel is found. 7 Press to select [Store as new channel] to store the new channel under a new channel number. 8 Press OK to enter [Store as new channel] , then press OK . 9 Press to return to the [Channel installation] menu. Step 3 Fine-tune analogue channels 1 Press M...
Page 30 - Test digital reception; Rename channels; Rearrange channels
28 Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. 1 Press MENU . 2 Press to select [Setup] > [Installation] > [Channel installation] > [Manual channel search] . 3 Press to enter...
Page 31 - Connect; Back connector
29 a T V ANTENNA Signal input from an antenna, cable or satellite. b EXT 1 and EXT 2 (CVBS and RGB) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. c SPDIF OUT Digital audio output to home theatres and other digital audio systems. TV ANTENNA SPDI...
Page 33 - Side connector
31 b VIDEO Composite video input from analogue devices such as VCRs. c USB Data input from USB storage devices. d HDMI Digital audio and video input from high-definition digital devices such as Blu-ray players. e (Headphone) Stereo audio output to headphones or earphones. Side connector a AUDIO L /R ...
Page 34 - Connect a computer
32 • DVI-HDMI cable • HDMI cable and HDMI-DVI adaptor • VGA cable DVI AUDIO IN LEFT/RIGHT VGA/DVI DVI AUDIO IN LEFT/RIGHT VGA/DVI VGA VG A AUDIO IN LEFT/RIGHT VGA/DVI f COMMON INTERFACE Slot for a Conditional Access Module (CAM). Connect a computer Before you connect a computer to the TV Set the scr...
Page 35 - Access CAM services; Insert and activate a CAM
33 Access CAM services 1 Af ter inser ting and activating the CAM, press MENU . 2 Press to select [Setup] > [Features] > [Common interface] . Applications provided by the digital TV » ser vice operator appear on the screen. Note This menu option is available only if the CAM • is inser ted and ...
Page 36 - Enable or disable EasyLink; Use one-touch standby; Use Philips EasyLink; EasyLink features
34 Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not • intend to use it. 1 Press MENU . 2 Press to select [Setup] > [Installation] > [Preferences] > [EasyLink] . 3 Select [On] or [Off ] . Use one-touch play 1 Af ter enabling EasyLink , press play on your device. T...
Page 37 - Use a Kensington lock
35 4 Press to select [Setup] > [Sound] > [T V speakers] > [On] to disable system audio control and enable the T V speakers. Note To mute the T V speaker s, selec t • [T V speakers] > [Off ] . Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft b...
Page 38 - Multimedia; Product; Supported display resolutions
36 Multimedia Suppor ted storage device: USB (Only • FAT or FAT 32 USB storage devices are suppor ted) Suppor ted multimedia file formats: • Images: JPEG • Audio: MP3 • Note Multimedia file names must not exceed 128 • char ac ter s. Tuner / Reception / Transmission Aerial input: 75 ohm coaxial (IEC75)...
Page 39 - Product specification; Supported TV mounts
37 Product specification Design and specifications are subject to change without notice. 32PFL3605H Without T V stand • Dimension ( WxHxD): 795.6 x 508.3 • x 93 (mm)Weight: 8.3 kg • With T V stand • Dimension ( WxHxD): 795.6 x 556.6 • x 220.8 (mm)Weight: 9.4 kg • 42PFL3605H Without T V stand • Dimensi...
Page 40 - Troubleshooting; General TV issues
38 Cannot remove ‘e-sticker’ banner displayed on the TV. To remove the logos and images, set the • location of your T V to home.1. Press MENU . 2. Select [Setup] > [Installation] > [Preferences] > [Location] . 3. Select [Home] and press OK . TV channel issues Previously installed channels d...
Page 41 - HDMI connection issues; Computer connection issues; Contact us; Sound issues
39 HDMI connection issues There are problems with HDMI devices: Note that HDCP (High-bandwidth Digital • Content Protection) suppor t can delay the time taken for a T V to display content from a HDMI device. If the T V does not recognise the HDMI • device and no picture is displayed, tr y switching ...
