Philips 32PF9541/10 - User Manual

Page 2 - Safety warnings; General

2 EN Safety warnings Do not insert the power plug in a wall socketor hang the TV to the wall before allconnections are made. • Place or hang the TV wherever you want, but make sure that air can circulate freely through theventilation slots. • Do not install the TV in a confined space such as a book ...

Page 3 - and; Getting started; Before you start

Before you switch on your TV, connect all your peripheral equipment. See To make video and audioconnections, p. 37. There is a wide range of audio and video equipment that can be connected to your TV. See To makeaudio and video connections, p. 37. EXT1 can handle CVBS, RGB and Audio L/R; EXT2 can ha...

Page 4 - Tip: for best quality use the suppressor cable supplied.; Overview of the side connector panel

< Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. Getting started (Continued) EN 4 - To connect a camera, camcorder or game, see To make video and audio connections, p. 38. - To connect a headphone, see To make video and audio connections, p. 38. - To connect a USB...

Page 5 - Colour keys; OPTION; Cursor keys; OK; Mute key: interrupt the sound or restore it.

B StandbyPress to switch the TV from or to standby mode.When switched to standby, a red indicator on the TV lights up. TV Press to select TV mode. DVD STB VCR AUX Press one of these keys to set your remote control tooperate a peripheral device.See Audio and Video equipment keys, p. 47. DEMO Press to...

Page 6 - Channel selection; AV; Select your peripherals; MODE; : Press this key repeatedly to toggle through the; Ò ‡ π †; Audio and Video equipment keys; CANCEL

+P- Channel selection - to browse through the TV channels and sources stored and marked in the Favourite channels lists; - to select a page in Teletext mode;- to quickly browse through the lists in the menus;- to switch the TV on from standby mode. 0/9 Digit keys To select a TV channel between 0 and...

Page 7 - Use of the OPTION key; Keys at the right side of the TV

EN 7 a Use of the OPTION key In case your remote is lost or broken, apart fromchannel selection and volume adjustment, you can stillchange some of the basic settings with the keys at theside of your TV. < Press the power switch B to switch the TV on or off. The MENU key can be used to summon the ...

Page 8 - Switch the TV on; Press the power switch; First time installation

EN 8 Note: if the TV has already been installed before and/or youwant to change the First time installation settings, proceedwith Use of the TV menu settings, p. 12. Switch the TV on < Press the power switch B at the side of the TV. > An indicator on the front of the TV lights up and thescreen...

Page 9 - Television is highlighted.; PHILIPS; PHILIPS

After the Welcome screen you are asked to select a language ofthe TV's on-screen menus. The text of the header and the infoon screen continuously change language. 1. Press the cursor up/down to highlight your language.2. Press the OK key on the remote control. 3. Follow the instructions on screen to...

Page 10 - Step 3: Settings assistant: select your TV settings

By means of several split screens/full screens you areprompted to select your preferred picture, sound andambilight settings, to finally arrive at a complete settingwhich satisfies you. 1. Press the green colour key on your remote control to enter the Settings assistant menu. 2. Select your Location...

Page 11 - How to navigate through the menus; Introduction

A lot of guiding instructions, help texts and messages will bedisplayed on your TV when you use the menus or when you tryto execute an action.Read the help texts which are being displayed on the specificitem highlighted.The colour keys at the bottom of the screen refer to thedifferent actions which ...

Page 12 - How to navigate through the menus (continued); Adjust viewing and listening settings

EN 12 Info TV menu TV settings Settings assistant Reset to standard Picture Sound Ambilight TV settings Features Installation Exit How to navigate through the menus (continued) Use of the TV menu settings 1. Press the MENU/BROWSE key on the remote control. > The main menu appears on the screen. 2...

Page 13 - Select Settings assistant and press the cursor right.; Press the green colour key to return to the TV menu again.; C. Individual settings for Picture, Sound and Ambilight; Press the green colour key to store the selected setting.

EN 13 Each time you've made a selection, press the green key toconfirm your selection. 1. Select Settings assistant and press the cursor right. > By means of several split screens/full screens you areprompted to select your preferred Picture and Soundsettings to finally arrive at a complete setti...

Page 14 - Adjust picture menu settings

The picture menu contains the settings that affect the quality ofthe picture. 1. P ress the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV menu is moved to the left. 3. Select TV settings and press the cursor right. > T...

Page 15 - Custom tint (only when Tint is set to Custom); WP; Pixel Plus; DNR; Adjust picture menu settings (Continued)

Custom tint (only when Tint is set to Custom) Fine tunes the white point ( WP ) and black level ( BL ) of the picture. 1. Select Custom tint and press the cursor right. 2. Use the cursor keys to select and adjust the settings of: R-WP : allows you to customise the colour tint by adjusting the red wh...

Page 16 - MPEG; On; Tip: this function is also accessible via the; key on

MPEG artefact reduction MPEG artefact reduction On smoothens the transitions on digital content. < Select On or Off. Colour enhancement Automatically controls green enhancement and bluestretch. It makes the colours more vivid. < Select Off , Minimum, Medium or Maximum. Active control The TV co...

Page 17 - Adjust sound menu settings

The sound menu contains the settings that affect the quality ofthe sound. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select TV settings and press the cursor right. > The TV...

Page 19 - Enjoy Ambilight

The ambilight menu contains the settings for controlling theambient lighting. Using ambient light gives a more relaxedviewing experience and improves perceived picture quality.Analysis of the picture content adapts the colours continuously.But the lights can also be set to any fixed colour and manys...

Page 21 - Custom colour; Allows you to customise the ambilight colour.; Select Saturation to adjust the colourfulness of the light.; Separation; Press the; Ambilight in standby mode

Custom colour Allows you to customise the ambilight colour. < Select Palette to select the general colour of the lightoutput. < Select Saturation to adjust the colourfulness of the light. Separation Allows you to define the stereo effect in case, Relaxed,Moderate or Dynamic has been selected i...

Page 22 - Adjust feature menu settings

The Features menu allows you to control the settings of specialTV functions, features and accessory equipments. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select Features and ...

Page 23 - Childlock; Adjust feature menu settings (Continued); Important: you have forgotten your code !

Childlock With a 4-digit code, you are able to lock TV channels andexternal sources to prevent children from watching certainprogrammes. 1. Select Childlock.2. Press the cursor right to enter the Childlock menu.3. Enter your 4-digit code. 4. Select one of the menu items of the Childlock menu and pre...

Page 24 - On timer

On timer From standby, this automatically switches the TV to thespecified channel number, at a specified time. 1. Select On timer.2. Press the cursor right to enter the On timer menu.3. Select Timer and press the cursor right.4. Select On.5. Select Channel and then the TV channel you want your TV to...

Page 25 - How to search for and store TV channels; Select your menu language; Installation menu; Select your country

EN 25 25 How to search for and store TV channels This menu allows you to select your preferred menu language. 1. Select the language menu item and enter the list of available languages with the cursor right. 2. Select your language with the cursor up/down.3. Press the OK key to confirm your selectio...

Page 26 - How to search for and store TV channels (Continued); Automatic installation; Store TV channels

EN 26 26 How to search for and store TV channels (Continued) Info TV menu Installation Channels Autom. installation Manual installation Rearrange Languages Country Channels Preferences Connections Decoder Factory settings Software upgrade After language and country are set correctly, you can nowsear...

Page 27 - Uninstall - reinstall; Rearrange the channel number list

This allows you to rename, to reshuffle and to uninstall orreinstall the stored channels. < Press the corresponding colour keys and follow the onscreen instructions. Reshuffle This allows you to change the order of the stored TVchannels. 1. Select the channel you want to change place.2. Press the...

Page 28 - Select your location; Select Teletext 2.5 On to take advantage of this feature.; Display a Programme title; key on the; Set your preferences

This menu contains items that can set or adjust various specialTV functions and that will typically be accessed onlyoccasionally. Select your location This allows you to select the location of your TV.If you choose for Shop it will result in fixed settings ofpicture, sound and ambilight.The location...

Page 29 - Digital Audio In; DIGITAL; Select your connections

EN 29 This allows you to select the peripheral equipment you haveconnected to the audio and video connectors. 1. Select Connections.2. Press the cursor right.3. Select the input to which the peripheral equipment is connected. > When you select EXT1 , EXT2 , EXT3 , HDMI 1 , HDMI 2 , Side or Digita...

Page 30 - Reset the Factory settings; USB device upgrade; This allows you to reset most of the predefined factory states.; How to upgrade the TV software

EN 30 Reset the Factory settings This allows you to upgrade your TV software using a USBdevice. USB device upgrade It is possible to initiate an upgrade procedure from a USBdevice (before you start up the TV). The memory devicemust be filled with the appropriate upgrade image (andstructure) which ca...

Page 31 - Create your favourite list; To select a channel from the displayed favourite list

Create your favourite list EN 31 This allows you to select up to four favourite channels lists withyour preferred TV channels and radio stations. For example, eachmember of your family can create his/her own favourite list.In addition to the favourite channel lists you may also select a listwith onl...

Page 32 - -Following file formats can be reproduced:; To insert a USB device; key on the remote control to; Multimedia Browser; To view content from a USB device; Note: USB devices are not supplied with this TV.

The Multimedia browser lets you display pictures, movies orplay audio files stored on a USB device. The Multimedia browserapplication is invoked from the main menu. -Following file formats can be reproduced: for pictures: JPEGfor audio: MP3, MP3 Pro, LPCMfor video: MPEG1, MPEG2 - Only FAT/DOS-format...

Page 33 - Multimedia Browser menu; Following icons may appear:

Multimedia Browser menu 1. Insert a USB device.2. Select the USB device under Multimedia with the cursor up/down. > The Multimedia browser allows you to browse contentstored on the inserted USB device. > The 2-panel browser will be shown with the left panelcontaining the content types (Music, ...

Page 35 - Select subpages; Teletext; Note: Teletext is not available via equipment connected to the

Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store mostbroadcasted pages and subpages to reduce waiting time. Aftereach programme change, the memory is refreshed. < Press b to switch the teletext on. > The main index page appears on the screen. ...

Page 36 - Language; Menu; Reveal; Teletext menu

Hypertext With hypertext you can quickly jump to a pagenumber orsearch for a specific word shown on the current teletextpage. 1. Press the OK key to highlight the first word or a number on the page. 2. Use the cursor up/down, left/right to select any other word or number you want to search for. 3. P...

Page 37 - To make video and audio connections; Connector table; Best video performance

EN 37 To make video and audio connections Tip: use the inputs that are available on your equipment that provide the best video or audioperformance, as below. Note: your TV comes with all types of connectors with the exception of the DVI connector butsome of your equipment may be equipped with this t...

Page 38 - To make video and audio connections - Side panel overview; VIDEO; Headphone; Warning: do not connect cable

To make video and audio connections - Side panel overview EN 38 Camera, Camcorder, Game 1. Connect your camera, camcorder or game as shown. 2. Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment alsoconnect AUDIO R 3 . S-VHS quality with an S-VHS camcorder isobtained by connect...

Page 39 - To make video and audio connections - Rear panel overview

Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 COMMON INTERFACE 75 HDMI 1 HDMI 2 ANTENNA 75 o DIGITAL AUDIO IN o DISPLAY SYNCHRONIZED o o o o o AUDIO OUT L R OUT AUDIO DIGITAL Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 FACE 75 HDMI 1 HDMI 2 ANTENNA 75 o DIGITAL AUDIO IN o DISPLAY SYNCHRONIZED o o o o o ...

Page 40 - Connect a VCR or DVD recorder; With a eurocable

EN 40 Connect a VCR or DVD recorder With a eurocable 1. Connect the aerial cables 1 and 2 as shown. 2. Connect the eurocable 3 as shown. 3. Make your selection of the source to which the VCR has been connected in the Installationmenu, Select your connections, p. 29. With the aerial cable only 1. Con...

Page 41 - Connect two VCRs or VCR and DVD recorder; With eurocables; Connect a satellite receiver

EN 41 Note: you can not record signals from equipment connected to the YPbPr input. Connect two VCRs or VCR and DVD recorder With eurocables 1. Connect the aerial cables 1 , 2 and 3 as shown. 2. Connect your VCRs or DVD-recorder to EXT1 and 2 with the eurocables 4 and 5 . 3. Select the equipment you...

Page 42 - Connect a DVD player, Cable box or game console; With a HDMI connector; With a DVI connector; Connect a DVD player or Cable box

EN 42 Connect a DVD player, Cable box or game console Note: in case of any problems, see Annex 5:Issues referring to connected peripherals with aHDMI connector, p. 56. With a HDMI connector HDMI is the leading new standard for Digital videoand audio interconnection. 1. Connect your equipment with th...

Page 43 - Connect a DVD player, a satellite receiver or Cable box; With Component Video Connectors

EN 43 Connect a DVD player, a satellite receiver or Cable box With Component Video Connectors 1. Connect the three separate component video cables 1 to the YPbPr jacks on the DVD player and to the Y, Pb and Pr jacks of EXT3 on the TV. 2. Connect the audio cable 2 to the digital out of the equipment ...

Page 44 - Connect a PC; PC equipped with a VGA connector:; AUDIO R; PC equipped with a DVI connector:

EN 44 Connect a PC PC equipped with a VGA connector: 1. Use a VGA to RGB H/V cable 1 to connect to the RGB H/V connectors of your TV. 2. Connect the audio cable 2 to the AUDIO R (right) and L (left) inputs of the TV. 3. Select the equipment you have connected in the Installation, Select your connect...

Page 45 - Connect a Home Cinema amplifier; Digital Home Cinema amplifier; DIGITAL AUDIO OUT; Analogue Home Cinema amplifier; AUDIO OUT L

EN 45 Connect a Home Cinema amplifier Digital Home Cinema amplifier < Connect a digital Home Cinema amplifier tothe DIGITAL AUDIO OUT connector 1 at the bottom of the TV. Analogue Home Cinema amplifier < According to the type of connector cables andthe connector input available on your HomeCin...

Page 46 - Select connected equipment; Press the cursor right again to enter the list of types of; Record a TV programme; See the handbook for your recorder.; Record with your recorder

EN 46 46 Select connected equipment Before operating your connected equipment you have to makea selection in the Installation, Select your connections menu,p. 29. 1. Press the MENU/BROWSE key. 2. Select TV menu and press the cursor right.3. Select Installation.4. Press the cursor right.5. Select Con...

Page 47 - To select between Normal and Expert mode; Audio- and video equipment keys

Most of the audio and video equipment from our range ofproducts can be operated with the remote control of your TV.Press one of the keys after you pressed one of the mode keys( DVD , STB , VCR , AUX ) according to the equipment you want to operate with this remote control.See Use of the Remote contr...

Page 48 - Troubleshooting

48 EN Symptom Possible cause/Remedy No picture < Verify if the supplied cables are connected properly. (The aerial cable to theTV, the other aerial to your recorder, the power cables, ..) < Verify if you selected the correct source. < Verify if the child lock has been switched off. Poor pic...

Page 49 - Annex 1:To set the remote control to work a Philips DVD or DVD/R; To cancel the selected mode

Annex 1:To set the remote control to work a Philips DVD or DVD/R 49 EN Your TV remote control gives you the opportunity to controlyour Philips DVD or DVD/R. 1. Press the DVD mode key for 4 seconds until the LED lights up constantly 2. Enter the code 500 with the digit keys for a Philips DVD player.E...

Page 50 - Annex 2 - Philips TV software upgrade with portable memory

Introduction Philips offers software upgrade capability for your TV usingportable memory. After you have completed a softwareupgrade, your TV will typically perform better.What improvements are made depends on the upgradesoftware you are using as well as the software your TVcontained before the upgr...

Page 51 - Automatic software upgrade procedure

Annex 2 (Continued) EN 51 Automatic software upgrade procedure 1. Switch off your TV and remove all memory devices.2. Insert the USB portable memory that contains the downloaded software upgrade. 3. Switch on your TV with the power key B at the side of the TV. 4. At startup the TV will scan the USB ...

Page 52 - Manual software upgrade procedure; Insert the portable memory that contains the downloaded; Select Software Upgrade in the Installation menu. Go to; Select the correct upgrade version and press the red colour

Manual software upgrade procedure For a manual software upgrade copy the “autorun.upg” filein a directory called “Upgrades” located in the root of theUSB portable memory. You can rename the file if you likebut keep the .upg extension. 1. Insert the portable memory that contains the downloaded softwa...

Page 53 - key on the remote control after having inserted a USB device and; General Rules; files using simple tools.; General Format; Annex 3 - Philips TV-Slideshow Format with background music

Introduction This document explains how to make a Philips slideshow file with background audio.Be aware that the content of this document is addressing technical or software skilled users.To start the slideshow open the slideshow file in the Multimedia browser of your TV. 1. Press the MENU/BROWSE ke...

Page 54 - Tag Name; title; Use

Annex 3 (Continued) 54 EN Supported XML-tags The following table gives a description of the XML syntax. Tag Name philips-slideshow title audio slide-duration slides slide Use mandatory optional optional optional mandatory optional Description Philips slideshow signature including the version. The ti...

Page 55 - Digital Camera Issues; is switched on before connecting to the TV.; USB Memory Device Issues; before you can access your files.; Annex 4 - Philips TV - Digital camera and USB issues

Digital Camera Issues If a USB connection between your digital camera and the TV isn’t working, you can try thesolutions below to resolve your problem.- Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct (see the manual of your digital came...

Page 56 - PC; Note: teletext will not be available via equipment connected to a

Annex 5 - Issues referring to connected peripherals with a HDMI connector 56 EN The HDMI IN connector allows the following TV and monitor display modes: HD Standard Definition TV (SDTV) 640x480i720x480i720x576i Enhanced Definition TV (EDTV) 640x480p720x480p720x576p High Definition TV (HDTV) 1920x108...

Page 57 - Index

active control ........................... 16ambilight .................................... 19antenna......................................... 4audio receiver .......................... 45audio equipment keys ............. 47auto format ............................... 16automatic installation..........

Page 58 - The packaging of this product is intended to; Disposal of your old product; Recycling; Product information; water pollution. Very low standby power consumption.; Disposal of batteries

58 EN R The packaging of this product is intended to be recycled. Apply to the local authorities forcorrect disposal. Disposal of your old product Your product is designed and manufactured withhighly quality material and components, which canbe recycled and reused. When this crossed-out wheeled bins...

Philips 32PF9541/10 - User Manual

Table of Contents:

Other Manuals for Philips 32PF9541/10

Summary

Other Philips Models