Page 2 - Preparation; Installing the TV; Insert the aerial plug into the socket; Connecting the mains; key on the remote control.; Installing the remote control
2 2 Preparation n 3 Installing the TV 4 Place your TV set on a stable and strongbase. 4 Leave at least a free space of 5 cm on bothsides and 10 cm from the top for goodventilation of the TV set. 4 Do not cover the ventilation openings withitems such as newspapers, cloths etc. Connecting the aerial 4...
Page 3 - Useful Tips; Switch off your TV if not in use.
3 3 Useful Tips 4 Avoid heat anddirect sunlight. 4 Avoid directexposure to rainor water. 4 Never repair the TV yourself – get a skilledpersonnel! 4 DO NOT leave your TV on standby for aprolonged period. 4 Switch off your TV if not in use. 5 This will allow the TV to be demagnetised,giving good pictu...
Page 4 - Connecting peripheral equipment; Connect to AV sockets; Connection for playback
4 4 Connecting peripheral equipment VCR VCD 1. Connect to AV sockets You may choose to connect up VIDEO 1 inor VIDEO 2 in or both. 4 connect the corresponding sockets ofthe equipment to that of the TV. 5 to view the playback, select the firstAV channel (if connection is made tosockets at VIDEO 1 in)...
Page 5 - ...connecting peripheral equipment; From one VCR to another VCR; Connection for headphones
5 5 …connecting peripheral equipment VIDEO 2 in MONITOR out VIDEO 1 in S-VIDEO AUDIO VIDEO L R VIDEO 2 in MONITOR out VIDEO 1 in S-VIDEO AUDIO VIDEO L R 1. From the TV channel you arewatching 4 connect the corresponding sockets ofthe VCR to the sockets at MONITOR out. Note: For mono equipment, conne...
Page 6 - The TV’s controls; For 25” models; Switch on or off the TV.; For 29” models
6 6 The TV’s controls For 25” models 1. Mains power Switch on or off the TV. 2. Red light indicator When light is on, it indicates that the TV is onstandby. Note :If no signal is detected by theTV after 10 minutes, it will switch to standbyautomatically. 3. Remote control sensor For the remote contr...
Page 7 - Using the remote control; Standby; or
7 7 Using the remote control Press : Standby AV channelselection Screeninformation Sleeptimer Digit SmartPicture/SmartSound Result : Switch off TV and a red indicatorlights up. To switch on TV again,press either the 0 to 9 , CH , CH , AV or 2 key. Select the AV channels . In TV mode : Switch on/offi...
Page 8 - ...using the remote control
8 8 Press : Menu IncredibleSurround Mute Channelselection Volumeadjustment Teletext function: Surf oralternatechannel Soundmode …using the remote control Result : Call up the main menu. If there isan existing menu, pressing thiskey will bring you back to theprevious level menu. If you are inthe 1st ...
Page 9 - To call up the 1st level menu :; Menus; st level
9 9 To call up the 1st level menu : 4 Press MENU key. To use the menus: 4 Press the cursor keys. to highlight go down to the nextlevel or to select orto execute To exit from a menu: 4 Press MENU key to go back to the previous level. OR 4 Press OSD key to exit. 2 e h f 4 b 1 2 3 4 5 6 7 8 9 0 CH MENU...
Page 10 - Follow the following steps to enter INSTALLATION menu:; Press the; Selecting the menu language
1 0 1 0 Installing the TV In order to view the programmes broadcasted, you have to do some simpleinstallation on the TV. Go into the INSTALLATION menu by using the keyson your remote control. Follow the following steps to enter INSTALLATION menu: & Call up 1st levelmenu with the MENU key. é Pres...
Page 11 - System selection; General steps to enter SYSTEM menu:
1 1 1 1 …installing the tv – system selection System selection (not applicable for single system sets) For multi-system sets: It is possible to select either PAL-BG, PAL-I, PAL-DK, SECAM-BG, SECAM-DK,NTSC M or AUTO. AUTO means that the TV automatically selects thecurrent system in transmission. For ...
Page 12 - Tuning in TV channels; Auto store
1 2 1 2 There are 2 ways to tune in channels : automatically (by AUTO STORE) ormanually (by MANUAL menu). Tuning in TV channels Auto store Use to tune in channels automatically. LANGUAGE ENGLISH AUTO STORE B SWAP B LANGUAGE ENGLISH AUTO STORE B SWAP B SKIP B ➧ ➧ LANGUAGE ENGLISH AUTO STORE B SWAP B ...
Page 13 - Manual
1 3 1 3 …tuning in tv channels Manual This menu enables you to search and store every available channel manually. & Enter INSTALLATIONmenu. é Press the key to highlight MANUAL . “ Select MANUAL withthe or key. ‘ Press the key to highlight SEARCH andthe key to start searching.Searching stops once...
Page 14 - Swap
1 4 1 4 Swap After the tuning of TV channels, you may wish to rearrange the channelnumbers according to your preference. & Enter INSTALLATIONmenu. é Press the key to hightlight SWAP. “ Select SWAP with the or key. FROM is highlighted. ‘ Select the channelyou wish to changefrom with the or or dig...
Page 15 - Skip channels
1 5 1 5 Skip channels LANGUAGE ENGLISH AUTO STORE B SWAP B & Go into INSTALLATIONmenu é Press the key to highlight SKIP. “ Select SKIP withthe or key. CHANNEL ishighlighted. ‘ Enter a channelnumber which youwish to skip. ( Press the key to highlight SKIP. § Select YES with the or key. CHANNEL DE...
Page 16 - Fine tuning
1 6 1 6 Fine tuning & Enter INSTALLATIONmenu. LANGUAGE ENGLISH AUTO STORE B SWAP B SWAP B SKIP B MANUAL B SYSTEM AUTO SEARCH 055 MHZ B FINE TUNE ■ ■ ■ ■ ■ ■ ❙ ■ ■ ■ ■ ■ ■ é Press the key to highlight MANUAL. “ Select MANUAL withthe or key. ‘ Press the key to highlight CHANNEL.Enter a channelnumb...
Page 17 - Picture settings; Personal settings
1 7 1 7 Picture settings Personal settings You can do adjustment on BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS,HUE*, COLOUR TEMP and CONTRAST PLUS of a picture via the 1st levelmenu. This adjustment will automatically be stored in the PERSONAL mode ofthe SMART PICTURE feature.(*for NTSC programmes only...
Page 18 - ...picture settings – smart picture; Smart Picture; Very vibrant colours.; Other picture settings; Noise reduction
1 8 1 8 …picture settings – smart picture Smart Picture These are some picture presets on the TV for your viewing pleasure. Pressthe SMART ` key repeatedly to select RICH, NATURAL, SOFT or PERSONAL. Very vibrant colours. Other picture settings Natural and originalcolours. Warm colours andgives a cin...
Page 19 - Sound settings; Other sound settings; Volume; Balance
1 9 1 9 Sound settings Personal settings You can do adjustment on TREBLE , BASS and INCREDIBLE SURROUND* of apicture via the 1st level menu. These adjustment will automatically be stored inthe PERSONAL mode of the SMART SOUND feature. How to do adjustment & Call up 1st level menu with the MENU k...
Page 20 - Ultra Bass; ...sound settings – smart sound; Smart Sound; AVL-Auto Volume Leveller
2 0 2 0 Ultra Bass Switch this feature to ON to further enhance thebass level of the sound output. …sound settings – smart sound Smart Sound These are some sound presets on the TV for your viewing pleasure. Pressthe SMART ± key repeatedly to select THEATRE, MUSIC, VOICE or PERSONAL*. (Note *: “NORMA...
Page 21 - Off air stereo sound; Switch to mono; Personal preference; Personal preference settings; Select first or second language
2 1 2 1 Off air stereo sound (only available in certain models) Switch to mono Press the e 4 key to switch between stereo and mono. If a TV programme is transmitted in NICAM* or STEREO*, you can switch toMONO and back again. When there are two languages in simultaneoustransmission, you are able to s...
Page 22 - To set timer
2 2 2 2 Sleeptimer Child Lock This feature enables you to lock channels which you do not wish others e.g.children to watch. You have a choice to lock all channels (inclusive of the twoAV channels) or individual channel (up to a maximum of 5 channels). If one tryto lock the 6th channel, a message “FU...
Page 23 - To change code; To lock channels
2 3 2 3 To change code It is possible to change the pre-set universal code by the following steps. …child lock – lock channels, change code & Call up 1st level menu with the MENU key. é Press the key to highlight CHILDLOCK. BLUE MUTE OFF INSTALLATION B BRIGHTNESS ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31...
Page 24 - To unlock channels; Clock
2 4 2 4 …child lock – unlock channels, clock ➧ ➧ ➧ CHANGE CODE XXXX CHANNEL 3 LOCK YES CLEAR ALL B CHANGE CODE XXXX CHANNEL 3 LOCK NO CLEAR ALL B CHANNEL 3 LOCK NO CLEAR ALL B To unlock channels & Press the key to highlight CHANNELand key in thechannel you wish tounlock. é Press the key to highl...
Page 25 - Surf; Select surf
2 5 2 5 BLUE MUTE OFF INSTALLATION B BRIGHTNESS ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 COLOUR ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 CONTRAST ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 ➧ ➧ ➧ CHILD LOCK B CLOCK B SURF A/CH BLUE MUTE OFF INSTALLATION B CHILD LOCK B CLOCK B SURF SURF BLUE MUTE OFF INSTALLATION B …clock, sur...
Page 26 - To add channels to a surf list; To call up channels from the surf list
2 6 2 6 …surf – add channels, call up channels To add channels to a surf list Note : To execute this feature, the channel number must be visible on thescreen. Should the channel number disappear, simply press the OSD key once to call it up. é Press the SURF keywithin 4 seconds orwhile the channelnum...
Page 27 - Deleting channels from a surf list
2 7 2 7 …surf – delete channels from a surf list Deleting channels from a surf list Note : To execute this feature, the channel number must be visible. Shouldthe channel number disappear, simply press the OSD key once to call it up. & Press and hold the f A/CH SURF key to cycle through all thech...
Page 28 - Select Alternate Channel; Blue Mute
2 8 2 8 BLUE MUTE OFF INSTALLATION B BRIGHTNESS ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 COLOUR ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 CONTRAST ❙ ❙ ❙ ❙ ❙ ❙ ❙ ■ ■ ■ ■ ■ ■ ■ ■ 31 ➧ ➧ ➧ ➧ CHILD LOCK B CLOCK B SURF SURF BLUE MUTE OFF INSTALLATION B CHILD LOCK B CLOCK B SURF A/CH BLUE MUTE OFF INSTALLATION B Alternate...
Page 29 - Teletext; coloured keys
2 9 2 9 Teletext (only available in certain models) Press : on/offteletext coloured keys teletextpage previous/next page enlargepage hold page reveal Result : Press once to switch on teletext.Press again to switch off.The main index page is displayed.Each subject has a 3 digit pagenumber. If the sel...
Page 30 - Before calling for service; Symptoms
3 0 3 0 Before calling for service Symptoms Colour patch(unevenness) “Ghosts”or doubleimages or Teletextgarbled (for setswith Teletext only) No picture Good picture butno sound Good sound butpoor colour or nopicture Snowish pictureand noise Horizontal dottedlines One white lineacross TV not respondi...
Page 31 - Specification
3 1 3 1 TV System Versions 56 57 67 68 69 74 75 79 94 PAL B/G/H • • • • • • • • • PAL I • • • • • • SECAM BG/DK • • • • • • PAL D/K • • • • • • NTSC M • • • • • • PAL 60 Playback • • • • • • • • • Specification Note : For operating voltage, frequency, power consumption and modeland version number, p...
