Page 5 - Contents
1 English 6 Install channels 30 Automatically install channels 30 Manually install analogue channels 31 Manually install digital channels 31 Rename channels 31 Rearrange channels 32 Access CAM ser vices 32 7 Connect devices 33 Back connections 33 Side connections 35 Connect a computer 36 Use a Condi...
Page 6 - Notice
2 Pixel characteristics This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industr y stan...
Page 8 - Important; Safety
4 Risk of injury or damage to the TV! • Two people are required to lift and carr y a TV that weighs more than 25 kg or 55 lbs. • When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can suppor t the combined weight of...
Page 9 - Screen care
5 English Screen care • Avoid stationar y images as much as possible. Stationar y images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationar y images, reduce screen contrast and brightness to avoid ...
Page 11 - DesignLine Tilt; Your TV; TV controls
7 English xxPFL3xx6 1 4 2 3 DesignLine Tilt 1 4 2 3 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your TV at www.philips.com/welcome. TV controls a +/-: Adjust volume. b (Home): Access the home menu. c CH +/-: Swi...
Page 12 - Remote control
8 g (Mute) • Mute or restore audio. h +/- (Volume) • Adjust volume. i 0-9 (Numeric buttons) • Select channels. j SUBTITLE • Enable or disable subtitles. k TEXT • Enable or disable teletext. l OPTIONS • Access options for the current activity or selection. m (Back) • Return to the previous menu or ex...
Page 13 - Remote control usage
9 English Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. ~5m ~30˚ xxPFL5xx6/xxPFL4xx6 ~5m ~30˚ xxPFL3xx6 ~...
Page 14 - If the TV is in standby; Switch your TV to standby; Use your TV; Switch your TV on
10 If the TV is in standby • Press ( Standby-On ) on the remote control. Switch your TV to standby • Press ( Standby-On ) on the remote control again. » The remote control sensor on the TV switches to red. DesignLine Tilt 4 Use your TV This section helps you perform basic TV operations. Switch your ...
Page 15 - Other ways to switch channels; View channel preview; Switch your TV off; Switch channels
11 English Other ways to switch channels • Enter a channel number using the Numeric buttons . • Press (BACK) on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Create and use lists of favourite channels’...
Page 16 - Adjust TV volume; To mute or unmute sound; Watch connected devices; Select a device from the source list
12 Adjust TV volume • Press +/- on the remote control. • Press +/- on the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. xxPFL5xx6/xxPFL4xx6 xxPFL3xx6 DesignLine Tilt Watch connected devices Note • Before you select a device as a source, switch the device ...
Page 18 - Use more of; Access TV menus
14 Add device to the home menu After you connect a device, add it to the home menu. 1 Press . 2 Select [Add new device] . 3 Follow the onscreen instructions to add the device to the home menu. » The device is displayed in the home menu. 4 To watch the device, switch it on, then select it in the home...
Page 19 - Use smart picture; Remove devices from the; Use settings assistant
15 English Use smart picture Use smar t picture to apply pre-defined picture settings. 1 Press ADJUST . 2 Select [Smart picture] , then press OK . 3 Select one of the following settings, then press OK . • [Personal] : Apply your customised picture settings • [Vivid] : Rich and dynamic settings, idea...
Page 20 - Manually adjust picture settings
16 • [Colour enhancement] : Make colours more vivid and improve the details in bright colours. You can switch this feature on or off. • [Gamma] : For selected models. Adjust the midtone intensity in the picture. Black and white are not affected. • [PC mode] : Adjust the picture when a PC is connecte...
Page 21 - Use smart sound; Change picture format
17 English [Movie expand 16:9] : (Not for HD and PC mode.) Scale 4:3 format to 16:9. [Wide screen] : Scale 4:3 format to 16:9. [Unscaled] : For HD and PC mode only, and in selected models only. Allow maximum sharpness. Some distor tion may be present due to the broadcaster’s systems. Set your PC res...
Page 22 - Manually adjust sound settings
18 Use the universal access menu You can activate the universal access menu during the first installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices. 1 While you watch TV, press OPTIONS . » The TV options menu appears. ...
Page 23 - Select teletext subpages; Use advanced teletext; Access the teletext options menu
19 English Select teletext subpages A teletext page can contain several subpages. Subpages are displayed next to the main page number. 1 Press TEXT . » The teletext screen appears. 2 Press or to select a teletext page. 3 Press or to enter a subpage. Select T.O.P. teletext broadcasts Jump from one su...
Page 24 - Manage the favourites list; Use the Electronic; Switch on EPG; Create and use lists of; View only the list of favourite; View all channels
20 Manage the favourites list 1 While you watch TV, press FIND . » The channel matrix menu appears. 2 Press OPTIONS . 3 Select [Select list] > [All] , then press OK . 4 Press OPTIONS . 5 Select [Mark as favourite] or [Unmark as favourite] , then press OK . » The channel is added or removed from t...
Page 25 - Set the TV clock manually; Display the TV clock; Change programme guide options
21 English Display the TV clock You can display a clock on the TV screen. The clock displays the current time using time data received from your TV ser vice operator. Set the TV clock manually In some countries, you need to set TV clock manually. 1 Press . 2 Select [Setup] > [TV settings] > [P...
Page 26 - Use timers; Automatically switch the TV to; Change the clock mode; Change the time zone; Use daylight saving
22 Use timers You can set timers to switch the TV to standby at a specified time. Tip • Set the TV clock before you use timers. Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a pre-defined duration. Tip • You can switch off your TV earlier or reset ...
Page 27 - Lock or unlock one or more channels; Set parental ratings; Lock unsuitable content; Set or change code
23 English Lock or unlock one or more channels 1 Press > [Setup] > [Channel settings] > [Child lock] > [Channel lock] . » A list of channels is displayed. 2 Select the channel that you want to lock or unlock, then press OK . » The first time you lock or unlock a channel, you are prompted...
Page 28 - Change language; Change menu language; View Scenea; Switch on Scenea
24 Change language Depending on your broadcaster, you can change the audio language, subtitle language, or both, for a TV channel. Multiple audio languages, subtitles, or both, are broadcast through teletext or DVB-T digital broadcasts. Dual sound broadcasts: With digital broadcasts, you can select ...
Page 29 - View a slide show of your photos; Select a subtitle language in digital; Play photos, music and videos; View photos
25 English View a slide show of your photos 1 When a full screen image of a photo is displayed, press OK . » A slide show begins from the selected photo. • Press the following buttons to control play: • to play. • to pause. • or to play the previous or next photo. • to stop. • To return, press . Cha...
Page 31 - Listen to digital radio; Update the TV software
27 English Step 1: Check the current software version 1 Press . 2 Select [Setup] > [Software settings] > [Current software inf] . » The current software information is displayed. 3 Write down the software version number. 4 To return, press OK . 5 To exit, press . Step 2: Download and update th...
Page 32 - B: Update when prompted through
28 C: Check for updates through digital broadcasts You can check if there are updates available through digital broadcasts. 1 Press . 2 Select [Setup] > [Software settings] > [Check on major updates] . 3 If an update is available, follow the on- screen instructions to star t the update. » The ...
Page 33 - Start a TV demo; Reset the TV to factory; Change TV preferences
29 English Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on cer tain models. Available demos are displayed in the menu list. 1 While you watch TV, press . 2 Select [Setup] > [Watch demo] , OK . 3 Select a demo and press OK to...
Page 34 - Update the channel list; Install channels; Automatically install channels; Step 1: Select your menu language
30 5 Select the network, then press OK . • [Antenna] : For free-to-air antenna or digital DVB-T channels. • [Cable] : For cable or digital DVB-C channels. 6 Follow the onscreen instructions to select other options, if any. » The star t menu for channel search is displayed. 7 Select [Start] , then pr...
Page 35 - Manually install digital; Rename channels; Manually install analogue; Step 1: Select your system; Step 2: Search and store channels
31 English Manually install digital channels You can search and store digital TV channels one at a time. 1 Press . 2 Select [Setup] > [Channel settings] > [Channel installation] > [Digital: Reception test] > [Find channel] , then press OK . 3 Press the Numeric buttons to enter the channe...
Page 36 - Rearrange channels
32 Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 While you watch TV, press FIND . » The channel matrix menu is displayed. 2 Press OPTIONS . » The channel options menu appears. 3 Select [Reorder] , then press OK . 4 Select the channel to rearrange,...
Page 37 - Connect devices; Back connections
33 English b EXT 1 (RGB and CVBS) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. c DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems. d SERV. U For use by ser vice personnel only. SPDIF OUT 7 Connect devices...
Page 39 - Side connections
35 English d HDMI Digital audio and video input from high- definition digital devices such as Blu-ray players. e (Headphone) Stereo audio output to headphones or earphones. f COMMON INTERFACE Slot for a Conditional Access Module (CAM). Side connections a AUDIO L/R Audio input from analogue devices c...
Page 40 - Connect a computer
36 • HDMI cable and HDMI-DVI adaptor • VGA cable DVI AUDIO IN LEFT/RIGHT VGA/DVI VGA VG A AUDIO IN LEFT/RIGHT VGA/DVI Connect a computer Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a suppor ted screen resolution on your computer. Connect a...
Page 41 - Access CAM services; Use a Conditional Access; Insert and activate a CAM
37 English Access CAM services 1 Inser t and activate the CAM (see ‘Inser t and activate a CAM’ on page 37). 2 Press OPTIONS . 3 Select [Common interface] . » Applications provided by the digital TV ser vice operator are displayed. Note • This menu option is available only if the CAM is inser ted an...
Page 42 - Use one-touch play control; Use one-touch standby; Use Philips EasyLink; Switch on or off EasyLink
38 Use one-touch play 1 After you switch on EasyLink, press play on your device. » The TV automatically switches to the correct source. Use one-touch play control If you connect multiple HDMI-CEC devices that suppor t this setting, all such devices respond to the play control buttons on this TV remo...
Page 43 - Maximise display for subtitled video
39 English Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio. 1 While you watch TV, press ADJUST . 2 Select [Speaker] , then press OK . 3 Select one of the following, then press OK : • [TV] : On by default. Stream...
Page 44 - Use a Kensington lock; Hear TV audio through another; Switch all EasyLink devices to standby
40 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Hear TV audio through another device If you connect an EasyLink- compliant device that has speakers, you can ...
Page 45 - Transmission; Product; Supported display resolutions; Multimedia
41 English Tuner / Reception / Transmission • Antenna input: 75ohm coaxial (IEC75) • DVB: DVB Terrestrial, DVB-C*, DVB-T, MPEG4 • TV system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L’ • Video playback: NTSC, SECAM, PAL • Tuner Bands: Hyperband, S-channel, UHF, VHF *For selected models Re...
Page 46 - Supported TV mounts
42 Product specification Design and specifications are subject to change without notice. 47PFL4606H • Without TV stand • Dimension (WxHxD): 1129.8 x 697.8 x 83 (mm) • Weight: 17.5 kg • With TV stand • Dimension (WxHxD): 1129.8 x 745.6 x 268 (mm) • Weight: 20.9 kg 46PFL5606H • Without TV stand • Dime...
Page 48 - Troubleshooting; General TV issues
44 Cannot remove ‘e-sticker’ banner displayed on the TV. • To remove the logos and images, set the location of your TV to home. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Location] . 3. Select [Home] and press OK . TV channel issues Previously installed channels do not ...
Page 49 - HDMI connection issues; Sound issues
45 English HDMI connection issues There are problems with HDMI devices: • Note that HDCP (High-bandwidth Digital Content Protection) suppor t can delay the time taken for a TV to display content from a HDMI device. • If the TV does not recognise the HDMI device and no picture is displayed, tr y swit...
Page 52 - Recto; Information about how to; How the switchover affects; When does switchover happen?; Visit us at
48 EN 12nc 3104 315 7671.1 date April 26, - 2010 name Bob Vranken product UK Switch Overleaflet Recto format / dimensions sheet 148x210mm material paper 70 gr. satin(maximum) colours - black UFD Brugge 148 Verso Information about how to re-tune your TV during the digital TV switchover. Info for UK o...
Page 54 - Contact information
Contact information This information is correct at the time of print. For updated information, see www.philips.com/suppor t. Austria/Österreich 0820 40 11 33 (€ 0,145/min*) *Aus dem österreichischen Festnetz. Kosten von anderen Netzbetreiber oder mobile kön- nen variieren Belarus/Беларусь 8 10 800 2...
