Philips 22PDL4906H/12 - Manuals

5 English Screen care • Avoid stationar y images as much as possible. Stationar y images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationar y images, reduce screen contrast and brightness to avoid ...

7 English xxPFL3xx6 1 4 2 3 DesignLine Tilt 1 4 2 3 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your TV at www.philips.com/welcome. TV controls a +/-: Adjust volume. b (Home): Access the home menu. c CH +/-: Swi...

8 g (Mute) • Mute or restore audio. h +/- (Volume) • Adjust volume. i 0-9 (Numeric buttons) • Select channels. j SUBTITLE • Enable or disable subtitles. k TEXT • Enable or disable teletext. l OPTIONS • Access options for the current activity or selection. m (Back) • Return to the previous menu or ex...

9 English Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. ~5m ~30˚ xxPFL5xx6/xxPFL4xx6 ~5m ~30˚ xxPFL3xx6 ~...

10 If the TV is in standby • Press ( Standby-On ) on the remote control. Switch your TV to standby • Press ( Standby-On ) on the remote control again. » The remote control sensor on the TV switches to red. DesignLine Tilt 4 Use your TV This section helps you perform basic TV operations. Switch your ...

11 English Other ways to switch channels • Enter a channel number using the Numeric buttons . • Press (BACK) on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Create and use lists of favourite channels’...

12 Adjust TV volume • Press +/- on the remote control. • Press +/- on the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. xxPFL5xx6/xxPFL4xx6 xxPFL3xx6 DesignLine Tilt Watch connected devices Note • Before you select a device as a source, switch the device ...

14 Add device to the home menu After you connect a device, add it to the home menu. 1 Press . 2 Select [Add new device] . 3 Follow the onscreen instructions to add the device to the home menu. » The device is displayed in the home menu. 4 To watch the device, switch it on, then select it in the home...

15 English Use smart picture Use smar t picture to apply pre-defined picture settings. 1 Press ADJUST . 2 Select [Smart picture] , then press OK . 3 Select one of the following settings, then press OK . • [Personal] : Apply your customised picture settings • [Vivid] : Rich and dynamic settings, idea...

16 • [Colour enhancement] : Make colours more vivid and improve the details in bright colours. You can switch this feature on or off. • [Gamma] : For selected models. Adjust the midtone intensity in the picture. Black and white are not affected. • [PC mode] : Adjust the picture when a PC is connecte...

17 English [Movie expand 16:9] : (Not for HD and PC mode.) Scale 4:3 format to 16:9. [Wide screen] : Scale 4:3 format to 16:9. [Unscaled] : For HD and PC mode only, and in selected models only. Allow maximum sharpness. Some distor tion may be present due to the broadcaster’s systems. Set your PC res...

18 Use the universal access menu You can activate the universal access menu during the first installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices. 1 While you watch TV, press OPTIONS . » The TV options menu appears. ...

19 English Select teletext subpages A teletext page can contain several subpages. Subpages are displayed next to the main page number. 1 Press TEXT . » The teletext screen appears. 2 Press or to select a teletext page. 3 Press or to enter a subpage. Select T.O.P. teletext broadcasts Jump from one su...

20 Manage the favourites list 1 While you watch TV, press FIND . » The channel matrix menu appears. 2 Press OPTIONS . 3 Select [Select list] > [All] , then press OK . 4 Press OPTIONS . 5 Select [Mark as favourite] or [Unmark as favourite] , then press OK . » The channel is added or removed from t...

21 English Display the TV clock You can display a clock on the TV screen. The clock displays the current time using time data received from your TV ser vice operator. Set the TV clock manually In some countries, you need to set TV clock manually. 1 Press . 2 Select [Setup] > [TV settings] > [P...

22 Use timers You can set timers to switch the TV to standby at a specified time. Tip • Set the TV clock before you use timers. Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a pre-defined duration. Tip • You can switch off your TV earlier or reset ...

23 English Lock or unlock one or more channels 1 Press > [Setup] > [Channel settings] > [Child lock] > [Channel lock] . » A list of channels is displayed. 2 Select the channel that you want to lock or unlock, then press OK . » The first time you lock or unlock a channel, you are prompted...

24 Change language Depending on your broadcaster, you can change the audio language, subtitle language, or both, for a TV channel. Multiple audio languages, subtitles, or both, are broadcast through teletext or DVB-T digital broadcasts. Dual sound broadcasts: With digital broadcasts, you can select ...

25 English View a slide show of your photos 1 When a full screen image of a photo is displayed, press OK . » A slide show begins from the selected photo. • Press the following buttons to control play: • to play. • to pause. • or to play the previous or next photo. • to stop. • To return, press . Cha...

27 English Step 1: Check the current software version 1 Press . 2 Select [Setup] > [Software settings] > [Current software inf] . » The current software information is displayed. 3 Write down the software version number. 4 To return, press OK . 5 To exit, press . Step 2: Download and update th...

28 C: Check for updates through digital broadcasts You can check if there are updates available through digital broadcasts. 1 Press . 2 Select [Setup] > [Software settings] > [Check on major updates] . 3 If an update is available, follow the on- screen instructions to star t the update. » The ...

29 English Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on cer tain models. Available demos are displayed in the menu list. 1 While you watch TV, press . 2 Select [Setup] > [Watch demo] , OK . 3 Select a demo and press OK to...

30 5 Select the network, then press OK . • [Antenna] : For free-to-air antenna or digital DVB-T channels. • [Cable] : For cable or digital DVB-C channels. 6 Follow the onscreen instructions to select other options, if any. » The star t menu for channel search is displayed. 7 Select [Start] , then pr...

31 English Manually install digital channels You can search and store digital TV channels one at a time. 1 Press . 2 Select [Setup] > [Channel settings] > [Channel installation] > [Digital: Reception test] > [Find channel] , then press OK . 3 Press the Numeric buttons to enter the channe...

32 Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 While you watch TV, press FIND . » The channel matrix menu is displayed. 2 Press OPTIONS . » The channel options menu appears. 3 Select [Reorder] , then press OK . 4 Select the channel to rearrange,...

33 English b EXT 1 (RGB and CVBS) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. c DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems. d SERV. U For use by ser vice personnel only. SPDIF OUT 7 Connect devices...

35 English d HDMI Digital audio and video input from high- definition digital devices such as Blu-ray players. e (Headphone) Stereo audio output to headphones or earphones. f COMMON INTERFACE Slot for a Conditional Access Module (CAM). Side connections a AUDIO L/R Audio input from analogue devices c...

36 • HDMI cable and HDMI-DVI adaptor • VGA cable DVI AUDIO IN LEFT/RIGHT VGA/DVI VGA VG A AUDIO IN LEFT/RIGHT VGA/DVI Connect a computer Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a suppor ted screen resolution on your computer. Connect a...

37 English Access CAM services 1 Inser t and activate the CAM (see ‘Inser t and activate a CAM’ on page 37). 2 Press OPTIONS . 3 Select [Common interface] . » Applications provided by the digital TV ser vice operator are displayed. Note • This menu option is available only if the CAM is inser ted an...

38 Use one-touch play 1 After you switch on EasyLink, press play on your device. » The TV automatically switches to the correct source. Use one-touch play control If you connect multiple HDMI-CEC devices that suppor t this setting, all such devices respond to the play control buttons on this TV remo...

39 English Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio. 1 While you watch TV, press ADJUST . 2 Select [Speaker] , then press OK . 3 Select one of the following, then press OK : • [TV] : On by default. Stream...

40 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Hear TV audio through another device If you connect an EasyLink- compliant device that has speakers, you can ...

41 English Tuner / Reception / Transmission • Antenna input: 75ohm coaxial (IEC75) • DVB: DVB Terrestrial, DVB-C*, DVB-T, MPEG4 • TV system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L’ • Video playback: NTSC, SECAM, PAL • Tuner Bands: Hyperband, S-channel, UHF, VHF *For selected models Re...

42 Product specification Design and specifications are subject to change without notice. 47PFL4606H • Without TV stand • Dimension (WxHxD): 1129.8 x 697.8 x 83 (mm) • Weight: 17.5 kg • With TV stand • Dimension (WxHxD): 1129.8 x 745.6 x 268 (mm) • Weight: 20.9 kg 46PFL5606H • Without TV stand • Dime...

44 Cannot remove ‘e-sticker’ banner displayed on the TV. • To remove the logos and images, set the location of your TV to home. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Location] . 3. Select [Home] and press OK . TV channel issues Previously installed channels do not ...

45 English HDMI connection issues There are problems with HDMI devices: • Note that HDCP (High-bandwidth Digital Content Protection) suppor t can delay the time taken for a TV to display content from a HDMI device. • If the TV does not recognise the HDMI device and no picture is displayed, tr y swit...

48 EN 12nc 3104 315 7671.1 date April 26, - 2010 name Bob Vranken product UK Switch Overleaflet Recto format / dimensions sheet 148x210mm material paper 70 gr. satin(maximum) colours - black UFD Brugge 148 Verso Information about how to re-tune your TV during the digital TV switchover. Info for UK o...

Contact information This information is correct at the time of print. For updated information, see www.philips.com/suppor t. Austria/Österreich 0820 40 11 33 (€ 0,145/min*) *Aus dem österreichischen Festnetz. Kosten von anderen Netzbetreiber oder mobile kön- nen variieren Belarus/Беларусь 8 10 800 2...

EN Play button Control video or music play DE Wiedergabetaste Wiedergabe von Videos oder Musik steuern FR Touche de lecture Contrôler la vidéo ou la lecture musicale NL Afspeelknop Afspelen van muziek of video bedienen IT Pulsante di riproduzione Controllare la riproduzi- one di video o musica ES Bo...

Non-contractual images. / Images non contractuelles. / Außer ver tragliche Bilder.All registered and unregistered trademarks are proper ty of their respective owners.Speci fi cations are subject to change without notice Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their re...