Perlick BSDZ - Manual
Perlick BSDZ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – installation and Operating instructions
- Page 3 – Important; : Proper air flow around the; Preparing the Cabinet for Use
- Page 4 – general information; Refrigeration and Temperature Control; Temperature Control “Off”:; Cleaning the Cabinet; NOTE; Cleaning the Condenser
- Page 5 – Replacement Parts; – Dual Zone Back Bar Cabinets
- Page 6 – reversing Door hinge; Tools Required; Flathead Screwdriver; Right Hinged door; Operations to Perform on Cabinet
- Page 7 – Wiring Diagram –; Door Dual Zone back bar Cabinet
INSTALLATION ANd OPERATION INSTRUCTIONS
dUAL ZONE bACk bAR CAbINET — SELf CONTAINEd
Table of Contents
PreParing the Cabinet
Specifications ........................................................2
tools required.......................................................3
Plumbing ...............................................................3
electrical ................................................................3
Uncrating and inspection ......................................3
installing Casters or Legs ....................................3
Placing the Cabinet ...............................................3
Leveling the Cabinet .............................................3
installing the base Plate ........................................3
refrigeration and temperature Control .................4
Cleaning the Cabinet .............................................4
Cleaning the Condenser .......................................4
Cleaning Stainless Steel ........................................4
replacement Parts ................................................5
reversing Door hinge ...........................................6
Wiring Diagram ......................................................7
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069
Toll Free 800-558-5592 • E-Mail: [email protected] • www.Perlick.com
IMPORTANT INfORMATION
to register your product, visit our web site at
(www.perlick.com). Click on “Commercial”, then
“Service”. You will see the link to “Warranty
registration Form”. You must complete and submit
this form or the installation date will revert back to
the ship Date.
This manual has been prepared to assist you in the
installation of your Cabinet and to acquaint you
with its operation and maintenance.
We dedicate considerable time to ensure that our
products provide the highest level of customer
satisfaction. If service is required, your dealer can
provide you with a list of qualified service agents.
For your own protection, never return merchandise
for credit without our approval.
We thank you for selecting a Perlick product and
assure you of our continuing interest in your
satisfaction.
WARNING: When lifting, the full weight of the
cabinet must be supported. Lift from the cabinet
base and not from the top. Improper lifting can
result in severe damage to the cabinet.
bSdZ60
Form no. Z2304
rev. 05.22.10
MOdEL NOS.
BSDZ Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Perlick is committed to continuous improvement. therefore, we reserve the right to change specifications without prior notice. installation and Operating instructions Sizes and Specifications, Dual Zone back bar Cabinets – Self Contained Form no. Z2304 rev. 05.22.10 60” [1524] 2 DOOR 44” [1118] 2 ...
Suggested Tools ■ #2 Phillips Screwdriver. ■ 10” Crescent Wrench. ■ 9 / 16 ” allen Wrench. ■ 5 / 16 ” and 3 / 8 ” hex Socket. ■ Power Drill or Driver. Plumbing no plumbing required. Condensate from the cooling coil is automatically evaporated through a condensate pan located in the side condensing u...
general information 4 Perlick is committed to continuous improvement. therefore, we reserve the right to change specifications without prior notice. Form no. Z2304 rev. 05.22.10 Refrigeration and Temperature Control each zone has been factory set to maintain the desired temperature specified when or...
