Page 2 - CONTENTS; LIST OF ILLUSTRATIONS
2 Pelco Manual C680M-G (7/01) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ................................................................................................................... 3 MODELS .............
Page 3 - DESCRIPTION; MODELS; IMPORTANT SAFEGUARDS AND WARNINGS; The product and/or manual may bear the following marks:
Pelco Manual C680M-G (7/01) 3 DESCRIPTION The DX1000 Series Digital Video Recorder (DVR) is a compact recorder that can store andplay back images from four cameras. The DVR can be placed on a shelf or desktop for easyaccess to the front panel controls for operation and programming. Live video from a...
Page 4 - FRONT PANEL CONTROLS; Figure 1. DX1000 Series DVR Front Panel; INSTALLATION; The following parts are supplied:; Figure 2. DX1000 Series DVR Installation
4 Pelco Manual C680M-G (7/01) Power Record Search Play/Pause Search Stop Function 1 2 3 4 5 6 7 8 9 0 FRONT PANEL CONTROLS Figure 1. DX1000 Series DVR Front Panel INSTALLATION The following parts are supplied: 1 DX1000 Series DVR (refer to Figure 1) 1 Induced Voltage Protector (refer to item 4c in F...
Page 5 - Table A. Video Coaxial Cable Requirements; Maximum Distance; Adequate
Pelco Manual C680M-G (7/01) 5 4 Connect alarm inputs and alarm relay output as follows: a. Inputs – Connect wiring (not supplied) to your alarms (not supplied). Two wiresare required for each alarm. You can have one alarm for each camera. b. Output – Connect wiring (not supplied) to a 12 VDC light o...
Page 6 - PROGRAMMING; OR
6 Pelco Manual C680M-G (7/01) PROGRAMMING Programming allows you to configure camera and alarm operation, set the system date andtime, and define a password. Figure 3. Menu Tree SETUP MENU CameraAll ResolutionAlarm OutputTimePasswordExit TIME Year / Month / Date / Hour / Minute Quit ALARM OUTPUT CAM...
Page 7 - CAMERA MENU; You can return to the
Pelco Manual C680M-G (7/01) 7 CAMERA MENU Use this menu to define the following: • Which cameras the DVR will record • Whether starting and stopping of recording will be done manually or automatically • What the record rate (frames per second) will be • What the recording resolution (low to high) wi...
Page 8 - Operation; section for recording times.; Table B. Maximum Frames per Second; Cameras; If
8 Pelco Manual C680M-G (7/01) 5. The fps (Frame Per Second) field shows the recording rate for all cameras. To change the fps, use the Search (<</>>) buttons to highlight fps, and then use thenumber keypad to enter the frames per second. The maximum frames per second isdetermined by the ...
Page 9 - Recording and
Pelco Manual C680M-G (7/01) 9 10. Use the Search (<</>>) buttons to highlight each field in the menu. Recording Times The recorder will record continuously between the specified times. Use the numberbuttons to enter the hour of the starting time and ending time. Enter two digits. Enterth...
Page 10 - ALL RESOLUTION MENU; Skip steps 1 and 2 if you are already in the Setup Menu.; Setting the
10 Pelco Manual C680M-G (7/01) RESOLUTION Lowest resolution: O f f Low resolution: O f f Standard resolution: O n High resolution: O f f Highest resolution: O f f Quit FUNCTION KEY LIST 0 : Setup1 : Camera 1 recording/stop2 : Camera 2 recording/stop3 : Camera 3 recording/stop4 : Camera 4 recording/s...
Page 11 - ALARM OUTPUT MENU; in; The alarm output
Pelco Manual C680M-G (7/01) 11 ALARM OUTPUT MENU The ALARM output on the rear panel is a single-pole, normally open, latching, dry contact.This output can be used to notify you if there has been an alarm event that might requirereview. The alarm output can be enabled or disabled (armed/disarmed) man...
Page 12 - Pressing the Stop
12 Pelco Manual C680M-G (7/01) 3. Use the Search (<</>>) buttons to move around within the menu. Highlight Alarm Out-put and press the Play/Pause button to select. The Alarm Output menu appears. 4. Use the Search (<</>>) buttons to highlight the fields for starting and ending...
Page 13 - TIME MENU; Playback Following Time Changes; in the; To set the system time and date:
Pelco Manual C680M-G (7/01) 13 3. Use the Search (<</>>) buttons to move around within the menu. Highlight Time andpress the Play/Pause button to select. The Time menu appears. FUNCTION KEY LIST 0 : Setup1 : Camera 1 recording/stop2 : Camera 2 recording/stop3 : Camera 3 recording/stop4 :...
Page 14 - PASSWORD MENU
14 Pelco Manual C680M-G (7/01) PASSWORD MENU Use this menu to change the password (optional). Skip steps 1 and 2 if you are already in the Setup Menu. 1. Press and hold the Function button. The Function Key List appears. Keep holding theFunction button. FUNCTION KEY LIST 0 : Setup1 : Camera 1 record...
Page 15 - HELP
Pelco Manual C680M-G (7/01) 15 HELP If the Help function is enabled, the Help screens appear on the monitor whenever power isturned on. Skip steps 1 and 2 if you are already in the Setup Menu. 1. Press and hold the Function button. The Function Key List appears. Keep holding theFunction button. 2. P...
Page 16 - OPERATION; VIEWING CAMERAS; AUTOMATIC EVENT RECORDING; Camera Menu; Turning off
16 Pelco Manual C680M-G (7/01) FUNCTION KEY LIST 0 : Setup1 : Camera 1 recording/stop2 : Camera 2 recording/stop3 : Camera 3 recording/stop4 : Camera 4 recording/stop5 : All the cameras recording6 : All the cameras stop : Alarm On: Alarm Off OPERATION The Record LED on the front panel indicates what...
Page 17 - RECORDING EXAMPLE; Programming; SAVING VIDEO; Table C. Average Recording Times
Pelco Manual C680M-G (7/01) 17 RECORDING EXAMPLE A company has a rear door that is not to be opened for any reason between 5 p.m. and 7a.m. During the day, the area around this door is recorded continuously (scheduled record-ing), but to conserve disk space, the area is only recorded at night if the...
Page 18 - PLAY SCREEN
18 Pelco Manual C680M-G (7/01) PLAYBACK START PLAYBACK To begin playback: 1. Press the Play/Pause button. 2. Enter the password if requested. 3. The Play window appears. PLAY From 2000 / 01 / 01 to 2000 / 03 / 03 Data search is possible by Year/month/date. Camera 3CH * Input camera channel number. P...
Page 19 - RECORDING WHEN HOUR IS SET BACK; Figure 4. Recording and Playback When Hour Is Set Back; POWER FAILURE
Pelco Manual C680M-G (7/01) 19 STOP PLAYBACK To stop playback: Press the Stop button. Playback stops and recording resumes if the DVR is programmed forautomatic recording. Live video appears on the monitor if the Preview feature is turned on. PLAYBACK FOLLOWING TIME CHANGES The DVR uses the time and...
Page 20 - ALARM OPERATI0N; The DVR will start recording.; Alarm Output Menu; ALARM RELAY OUTPUT OPERATION; To manually arm the relay:
20 Pelco Manual C680M-G (7/01) ALARM OPERATI0N When an alarm input on the rear of the DVR is triggered, two things can happen: • The DVR will start recording. • The alarm output relay will turn on a light or other device to alert you that there hasbeen an alarm. Application example: A company has a ...
Page 21 - The relay is now turned off.; Arming the Relay
Pelco Manual C680M-G (7/01) 21 Relay Operation When an alarm input is activated, a 20-second countdown begins before the relay turns onthe warning light or buzzer. The numbers appear on the screen. This is an entry feature thatallows you to disarm the alarm when you enter your own premises. Once the...
Page 22 - MECHANICAL
22 Pelco Manual C680M-G (7/01) TROUBLESHOOTING Symptom: You cannot stop recording even after pushing the Stop button. Check the Camera menu for the camera(s) that will not stop recording. Makesure the Automatic Recording feature is turned off. Symptom: There is no video on the monitor while the DVR ...
Page 23 - REGULATORY NOTICES; Reorient or relocate the receiving antenna.
Pelco Manual C680M-G (7/01) 23 REGULATORY NOTICES This equipment has been tested and found to comply with the limits of a Class B digital de-vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installatio...
Page 24 - REVISION HISTORY; Date; PRODUCT WARRANTY AND RETURN INFORMATION
24 Pelco Manual C680M-G (7/01) ® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco. © Copyright 2001, Pelco. ™ Esprit and Camclosure are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C680M 12/00 Original version. C680M-A 01/01 Ch...
