Page 2 - Preface; Trademarks
2 Intelli-M Hardware Installation And Reference Guide Preface This manual is a hardware installation and reference for the Intelli-M ® access control security system. An overview of a typical configuration for a hardware installation is provided, as well as a description of the major Intelli-M hardw...
Page 3 - Table of Contents
Intelli-M Hardware Installation And Reference Manual 3 Table of Contents O FFICIAL N OTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FCC Declaration Of Conformity (S-EIDC-U, S-PCON-U) . . . . . . . . . . . . . . . . . ....
Page 5 - Official Notices; • Consult the dealer or an experienced radio/TV technician for help
Intelli-M Hardware Installation And Reference Guide 5 Official Notices FCC Declaration Of Conformity (S-EIDC-U, S-PCON-U) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason...
Page 7 - Hardware Overview; The following topics can be found within this Chapter:; • Intelli-M Hardware Overview
Intelli-M Hardware Installation And Reference Guide 7 Chapter 1: Intelli-M ® Hardware Overview Contents This Chapter provides an overview of the Intelli-M system for electronic access control (EAC). A section describing the layout of this manual is also provided. The following topics can be found wi...
Page 8 - Intelli-M Hardware Overview
Chapter 1: Intelli-M® Hardware Overview 8 Intelli-M Hardware Installation And Reference Guide Intelli-M Hardware Overview This manual provides reference, installation, and technical specifications for the hardware products that are used with the Intelli-M system. Technical specifications for each pr...
Page 9 - Using This Manual; Chapter 4: Wiring Connections And Configurations
Chapter 1: Intelli-M® Hardware Overview Intelli-M Hardware Installation And Reference Guide 9 Using This Manual This manual provides reference and installation guidance for the hardware components that are used in the Intelli-M system. Technical specifications are provided. Here is a quick overview ...
Page 11 - Contents; This Chapter provides a basic description of the Intelli-M; • Determining The Network IP Address Type
Intelli-M Hardware Installation And Reference Guide 11 Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) Contents This Chapter provides a basic description of the Intelli-M ® S-EIDC-U. Technical features are listed, and various wiring and power up configurations are shown. The following topi...
Page 12 - Technical Features; • Supports a local database of 1,500 card holders
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) 12 Intelli-M Hardware Installation And Reference Guide S-EIDC-U Overview Intelli-M’s S-EIDC-U (ethernet Integrated Door Controller) provides access control and alarm services for a single door. The cutting-edge technology of Power over Ethern...
Page 14 - magnetic; This is a shared load.; Magnetic l; from the protected area.; Keep in mind the following points:
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) 14 Intelli-M Hardware Installation And Reference Guide The steps necessary to wire an S-EIDC-U for a single door are as follows: Step 1: Connect magnetic lock or door strike. Refer to the illustration above. The following information may be p...
Page 15 - Four Power Options; hct
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) Intelli-M Hardware Installation And Reference Guide 15 Powering Up An S-EIDC-U The S-EIDC-U is designed to be powered from either a PoE enabled switch or from an external power source. Use one of the power configuration options shown in the F...
Page 16 - Determining The Network IP Address Type; address type may or may not be DHCP:; Setting A DHCP IP Address Within The S-EIDC-U; address type is static:
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) 16 Intelli-M Hardware Installation And Reference Guide aggregate power draw of all PoE powered devices does not exceed the total power budget of the switch. Exceeding the power budget of a PoE enabled switch will cause an S-EIDC-U to randomly...
Page 17 - Setting A Static IP Address Within The S-EIDC-U; is separated by all LEDs flashing once.; and the default Password is; admin; Click the “System” button and then click “Controllers.”
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) Intelli-M Hardware Installation And Reference Guide 17 This means a DHCP IP address cannot be determined (i.e., there is no DHCP connection). When this occurs, the S-EIDC-U will revert to its built in default static address of 169.254.1.1 Not...
Page 18 - Dynamic DHCP addressing with an expiration time limit; Note: The Supervisor Plus software has not been UL verified.; Perform the steps described in the “; Click the “System” button and then click “Controllers.”
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) 18 Intelli-M Hardware Installation And Reference Guide Setting A DHCP IP Address Within The S-EIDC-U When using DHCP addressing, an S-EIDC-U on power up sends a request for an address lease to any DHCP server on the network. If a DHCP server ...
Page 19 - section above to see the possible power connections.; Quick Mount Assembly
Chapter 2: S-EIDC-U (ethernet Integrated Door Controller) Intelli-M Hardware Installation And Reference Guide 19 Resetting An S-EIDC-U To perform a hardware reset of an S-EIDC-U, perform the following steps: Step 1: Disconnect power from the S-EIDC-U. Refer to the “ Powering Up An S-EIDC-U ” section...
Page 22 - LED voltage indicator
Chapter 3: S-PCON-U (Power Connector) 22 Intelli-M Hardware Installation And Reference Guide S-PCON-U Overview The Intelli-M Power Connector Module (S-PCON-U) is a dual input, single output power supply and communications module for the Intelli-M ethernet IDC (S-EIDC-U). It provides a method for sup...
Page 23 - (locked area) of the access facility to meet UL requirements.
Chapter 3: S-PCON-U (Power Connector) Intelli-M Hardware Installation And Reference Guide 23 Wiring And Powering Up S-PCON-U When the S-PCON-U is connected to a PoE enabled switch, electronics inside the S-PCON-U signal the PoE switch to place power onto the input ethernet cable. This power is then ...
Page 25 - • Single Door Configuration With S-EIDC-U
Intelli-M Hardware Installation And Reference Guide 25 Chapter 4: Wiring Connections And Configurations Contents This Chapter provides a description of the wiring connections for various Intell-M products, and various configurations diagrams featuring the products as well. The following wiring conne...
Page 27 - Input “C” is DC common or ground.
Chapter 4: Wiring Connections And Configurations Intelli-M Hardware Installation And Reference Guide 27 S-EIDC-U Wiring Terminals The following circuit connections on the S-EIDC-U must occur in a “protected area” to meet UL requirements. A protected area is defined as being within the locked area of...
Page 28 - Single Door Door Configuration With S-EIDC-U
Chapter 4: Wiring Connections And Configurations 28 Intelli-M Hardware Installation And Reference Guide Single Door Door Configuration With S-EIDC-U Built-inWarning Buzzer CAT 5/6 S-EIDC-U To Ethernet Hub Electro-magnetic Lock Door Strike Door Contact Card Reader or Keypad Card Reader or Keypad Buil...
Page 29 - Appendix A: eFamily Update Utility; The following topics can be found within this Appendix:; Installing The eFamily Update Utility
Intelli-M Hardware Installation And Reference Guide 29 Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) Contents The eFamily Update Utility provides the ability to update the firmware, backup the device configuration (including card holders, schedules, and se...
Page 30 - Supervisor Plus or the; Supervisor Plus Users; Installation Procedure; files during the update procedure.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) 30 Intelli-M Hardware Installation And Reference Guide Installing The eFamily Update Utility Installation of the eFamily Update Utility is dependent on Intelli-M ® Supervisor Plus or the Intelli-M ® Web Interfa...
Page 31 - This completes installation of the “eFamily Update Utility”.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) Intelli-M Hardware Installation And Reference Guide 31 Figure A-2: Select Installation Folder Screen Be sure to indicate if the utility will be used by only you, or if it will be used by anyone who has access t...
Page 32 - Before Updating Your eFamily Device; eFamily Update Procedure; Launch the eFamily Update Utility
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) 32 Intelli-M Hardware Installation And Reference Guide Before Updating Your eFamily Device To update an eFamily device, you must first gather the following information for the procedure: • IP Address of the dev...
Page 33 - Backup Step” is enabled.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) Intelli-M Hardware Installation And Reference Guide 33 word for your system, then use the default information provided. In most instances, the default information will be correct. If you know that your TCP port...
Page 34 - Click the “Next” button which will display the “Update File” screen.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) 34 Intelli-M Hardware Installation And Reference Guide The “Browse” button can be used to change the default name of the backup file (which is the year, month, and date per the computer’s clock in yyyymmdd form...
Page 35 - file to the eFamily device.; update utility will perform.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) Intelli-M Hardware Installation And Reference Guide 35 4. The “Restore File” screen is used to load a configuration onto the device that is dif- ferent from the one currently on the device. (An example of this ...
Page 36 - Click the “Next” button to upgrade data to the eFamily device.
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) 36 Intelli-M Hardware Installation And Reference Guide 6. Click the “Next” button to upgrade data to the eFamily device. As the update proceeds, the screen will provide details about the update process. Refer t...
Page 37 - Errors That Occur During Update
Appendix A: eFamily Update Utility (Backup, Upgrade, And Restore eFamily Device Software) Intelli-M Hardware Installation And Reference Guide 37 Errors That Occur During Update If any problems occur during the update process, an error message similar to that shown in Figure A-14 with details about t...
Page 39 - Appendix B: Demo Kit Wiring; Input Configuration:
Intelli-M Hardware Installation And Reference Guide 39 Appendix B: Demo Kit Wiring The following data provides the default configuration parameters if wiring the S-EIDC-U for a demo kit. Important: An alarm is defined within Intelli-M as an event (i.e., alert) that is sent to the software monitoring...
Page 40 - Controller Configuration:
Appendix B: Demo Kit Wiring 40 Intelli-M Hardware Installation And Reference Guide Controller Configuration: • Description: S-EIDC-U 300 • IP Address: 169.254.1.1 • Serial #: Obtain from back of S-EIDC-U • Reader Type: • IN: Card reader • OUT: Reader + keypad Access Service Configuration: • General ...
Page 41 - Hardware Technical Specifications; Note: All specifications are subject to change without notice; Dimensions
Intelli-M Hardware Installation And Reference Guide 41 Appendix C: Intelli-M ® Hardware Technical Specifications The specifications for various hardware components of the Intelli-M system are given below. Note: All specifications are subject to change without notice S-EIDC-U Technical Specifications...
Page 42 - Direct from PoE (Power over Ethernet) Switch
Appendix C: Intelli-M® Hardware Technical Specifications 42 Intelli-M Hardware Installation And Reference Guide Power Direct from PoE (Power over Ethernet) Switch Note: PoE has not been UL verified. Optional: External (24 VDC, 1 A) Power Supply Note: Power Supply must be UL 294 listed with a power l...
Page 43 - Body: Black Anodized Extruded Aluminum End Caps: Black ABS Plastic; Environmental; Note: The Ethernet Input Connectors have not been UL verified.
Appendix C: Intelli-M® Hardware Technical Specifications Intelli-M Hardware Installation And Reference Guide 43 S-PCON-U Technical Specifications(Power Controller) Dimensions Power Connector Module (S-PCON-U) 3.40" W x 2.25" H x 1.03" D (8.64 cm x 5.72 cm x 2.62 cm) Weight 3.5 oz (99.2 g...
Page 44 - Power In
Appendix C: Intelli-M® Hardware Technical Specifications 44 Intelli-M Hardware Installation And Reference Guide Power In Power over Ethernet (PoE) -- 802.3af compatible Ethernet switch Note: PoE has not been UL verified. DC Power -- 24 VDC, 1A Note: Power Supply must be UL 294 listed with a power li...
Page 45 - Miscellaneous Computer Hardware Specifications; Performance Communications Server Requirements; Minimum Server Requirements
Appendix C: Intelli-M® Hardware Technical Specifications Intelli-M Hardware Installation And Reference Guide 45 Miscellaneous Computer Hardware Specifications Note: Miscellaneous Computer Hardware Specifications have not been UL verified. Performance Communications Server Requirements -- The minimum...
Page 46 - Minimum Badging / Workstation Requirements
Appendix C: Intelli-M® Hardware Technical Specifications 46 Intelli-M Hardware Installation And Reference Guide Minimum Badging / Workstation Requirements -- The minimum requirements for a Badging / Workstation are as follows: • 1 GHz CPU • 512 MB RAM • 20 GB hard disk • 1 parallel port • 1 USB port...
