Parrot Uncle F6299BK110V - User Manual

1. Follow these instructions carefully to enjoy maximum safety in the installation and operation of this equipment.

2. The electrical installation of the ceiling fan must be carried out by an authorized electrician in order to be covered by our warranty. Please remember to

require your installer to test all the fan functions before you leave. In case of any doubt from the installer, do not hesitate to contact us.

3. This device can be used by children aged 8 years and above and people with reduced physical, sensory or mental abilities or lack of experience or

knowledge, if they have been given appropriate supervision or training regarding the use of the device and they understand the dangers of its use.

Children should not play with the device. The cleaning and maintenance of the device should not be carried out by children without supervision.

4. The fan must be installed in such a way that the blades are more than 2,3m above the ground. Make sure that there is a space of at least 30cm

between the fan’s blades and any wall or other obstacle that they could hit. It is important to note that the greater the distance, the more efficient the air

flow produced will be.

5. Any action performed for the electrical connection of the device, such as its cleaning, must be carried out after ensuring that the general power supply

is disconnected, by removing the corresponding fuse or disarming the protective switch in order to ensure total isolation of the power supply.

6. The system of attaching the fan bracket to the ceiling will depend on the type of ceiling where the installation is to be done. The decision on which

attachment system to use and the quantity is the installer’s responsibility.

7. The fan must be installed at a location on the ceiling sch that the blades are at least 2.3 m above the floor and 300 mm from any object or wall. The

mounting bracket must be attached to a ceiling structure that is capable of supporting a minimum of 30 kg using the two screws provided. At least 30

mm of the length of the screws must be screwed into the bracket. When deciding where to mount the fan, be sure that there is at least 30 cm of space

between the fan and any wall or other obstruction that the fan blades could collide with. The greater this distance, the more effective the air flow

produced.After the fan is mounted, be sure that the blades are no less than 2.3 m above the ground.

8. The ground wire of the fan must be connected to the earth network of the installation, to avoid any derivation that may put people in danger.

9. Do not connect the fan’s power supply to any dimmers, potentiometers, or light switches, as it will cause the fan to malfunction and/or will damage the

motor. For the electrical connection it is necessary to incorporate a switch disconnector in accordance with the installation regulations, which ensures

an omnipolar cut, directly connected to the power terminals and must have a contact separation at all its poles, which provides total disconnection

under conditions of Category III overvoltage. The fan must be directly connected to a properly protected installation circuit (magnetothermal differential

switch with the adequate size for the fan’s consumption and technical specifications). Only use the fan’s control to turn it on or stop it.

10. It is recommended not to use these types of fans along with gas installations simultaneously in the same room.

11. Do not insert anything that could hit the fan’s blades into its pathway while it is moving, as this could cause damage to people, can damage the blades,

and can offset the balance of the unit, causing vibrations and wobbling.

12. After installing the fan, ensure that all fastenings are secure and tightened in order to avoid any noise caused by loose elements.Due to the fan’s

movement, certain fastenings may become loose. Check all fastenings twice per year at a minimum in order to ensure that they are sufficiently tight. If

necessary, they must be retightened.

13. If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service or similar qualified personnel in order to avoid any

malfunction.

NOTE:

The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.

NOTE:

This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are different or are

impaired, or lack of experience or knowledge, unless such persons are supervised or trained to operate the appliance by a person responsible for their
safety.

NOTE:

Children should be supervised to ensure that they do not use appliances as a toy.

THANK YOU FOR YOUR PURCHASE

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the
product

SAFETY TIP

TECHNICAL INFORMATION

SKU

Rated Voltage

Rated power(motor)

Light

F6299BK

110-120 VAC

63

W

18W LED 3000/4000/6000k

195mm

25mm

150mm

255mm

176mm

1320mm

F6299BK

Installation & Operating Instructions for the

Parrotuncle Owner’s Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER