Paradyne 9109 OCU-DP - Manual
Paradyne 9109 OCU-DP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Checklist; Equipment You May Need to Order; HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
- Page 3 – Installing the I/O Card; At the rear of the housing, align the I/O card with the upper
- Page 4 – Connecting to the DDS Interface; Insert the RJ48S DDS network
- Page 5 – Front View; Removing the Housing’s Bezel; Depress the latch at the top of the housing to open the bezel.
- Page 6 – Installing the APM
- Page 7 – Removing/Replacing a Card; Removing/Replacing an APM; Refer to Steps 3 – 5 of
- Page 8 – Alternately tighten each captive screw until both are snug.; Document Feedback
TM
1
9109 OCU-DP Application Module (APM)
Installation Instructions
Document Number 9109-A2-GN15-10
May 1999
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.
Complete documentation for this product is available at www.paradyne.com.
Select
Library
→
Technical Manuals
→
NextEDGE Multiservices Access System.
Select the following document:
9191-A2-GH30
NextEDGE Multiservices Access System Technical Reference
To request a paper copy of a Paradyne document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
Before You Begin
Make sure you have:
The housing, and any associated hardware already installed
A T1 NAM already installed in Slot 01 and connected to the network
Applicable cables
A small Phillips screwdriver (#1 or #2) to install the APM
A small, flat-blade screwdriver to install the I/O card and cable connections
See the Technical Reference for additional information on:
Troubleshooting
Technical Specifications
Cables, Connectors, and Pin Assignments
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
496-15149 2 Package Checklist Verify that your package contains the following: OCU-DP APM OCU-DP I/O card When your equipment arrives, inspect it for physical damage and tighten any screwsthat may have worked loose. Contact your sales representative immediately if there areany signs of shipping dama...
9109 OCU POR T 1 Port 1 Port 2 98-15922 Port 3 Port 4 Port 5 Port 6 POR T 2 POR T 3 POR T 4 POR T 5 POR T 6 3 Installing the I/O Card The I/O card provides the APM with DDS connections. The I/O card inserts directlybehind the APM that it supports. Slot numbers are identical to facilitate correctinst...
9109 OCU POR T 1 OCU 98-15970 POR T 2 POR T 3 RJ48S 8-position Modular Cable COMSPHERE 3610 DDSDSU 4 Connecting to the DDS Interface 1. Insert the RJ48S DDS network cable into the 4-wire DDS port. The 2-port version provides two RJ48S, 8-position modular keyed jacks, while the 6-port version provide...
