Paradyne 9000 Series - Manual
Paradyne 9000 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Do I Have the Correct Power Supply?; Specification; Rated Nominal Voltage; power supplies installed
- Page 3 – Universal Power Supply
- Page 4 – Installing the Initial Power Supply
- Page 5 – Installing the Redundant Power Supply; Installing a Replacement Power Supply
- Page 6 – Power-Up Verification; Insert the plug into an ac outlet. The power supply LED lights.; Verification Checklist
- Page 7 – Troubleshooting; Power Supply; Symptom; Removing the Power Cord; Disconnect the power cord plug from the ac outlet first.; Power Failure Recovery
496-15149
TM
1
5-Slot Housing and
FrameSaver 9000 Series Access Carrier
AC Power Supply
Installation Instructions
Document Number 9000-A2-GN17-30
August 1998
Before You Begin
Both the 5-slot housing and the FrameSaver 9000 Series Access Carrier can hold up to
two power supplies. A second redundant power supply provides backup for the first.
Before you start your installation, be sure to review the following information.
CAUTION:
Refer installation of power supplies to qualified service personnel.
!
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal
operation. When performing installation procedures,
however, take proper static control precautions to
prevent damage to equipment. If you are not sure
of the proper static control precautions, contact
your nearest sales or service representative.
Package Contents
Verify that your package contains an ac power supply (see following specifications).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Do I Have the Correct Power Supply? The following ac power supplies are available. Make sure that you have the correct onefor your housing and application. NOTE: The 120 Vac power supply has a label to warn you to connect the supply only to a100–120 Vac power source. Name/FeatureNumber Wattage/Vol...
3 Universal Power Supply Front Rear 97-15746 Keyed Technical Specifications for Universal Power Supply in Access Carrier Specification Criteria Rated Nominal Voltage 100–240 Vac, 50/60 Hz Operating Voltage Range 85–265 Vac, 50/60 Hz Rated Current 4.0 amps Power Consumption (typical) 1 power supply i...
4 Installing the Initial Power Supply Install the initial power supply into the top slot. (Use the bottom slot for a second powersupply, if desired.) 1. Remove power supply from its shipping box. Handle only by the top and bottom edges to avoid damaging the card. NOTE: The power I/O card in the rear...
