Paradyne 7511 - Manual
Paradyne 7511 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cables You May Need to Order; Cables and Pin; Installing the Dual DSU; Before you install your DSU, read the; Configuring the DSUs; Procedure; To configure the Model 7511 Dual DSU:
- Page 3 – Model 7511 Switch Locations
- Page 8 – Installing the Rear Connector Plate; To install the rear connector plate:
- Page 9 – Installing the DSU Card; To install the Model 7511 Dual DSU:
- Page 11 – Installing the Network and DTE Cables; To install the cables:
- Page 12 – Troubleshooting; Symptom
- Page 13 – Important Safety Instructions; or included in the manual.
- Page 14 – Notices
- Page 15 – Government Requirements; Notice to Users of the Telephone Network in the United States; DDS Facility; Technical Specifications, in the User’s Guide.; Notice to Users of the Canadian Telephone Network
- Page 16 – If your equipment is in need of repair, refer to the next section.; Visit the Paradyne World Wide Web site at; information via fax or to speak with a company representative.
TM
1
7511-A2-GN10-10
January 1999
Model 7511 Dual DSU
Startup Instructions
Document Number 7511-A2-GN10-10
January 1999
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the
waste of surplus printing. It also helps us maintain competitive prices for our
products.
Complete documentation for this product is available at www.paradyne.com.
Select
Service & Support
→
Technical Manuals
→
Subrate Digital Access
Devices.
Select the following document:
7511-A2-GB20
Model 7511 Dual DSU User’s Guide
To request a paper copy of a Paradyne document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
Preparation
Make sure you have:
A clean, well-lit, and ventilated site that is free from environmental extremes.
One to two feet of clearance for cable connections.
An operable network connection.
Package Checklist
Verify that your package contains the following:
A Model 7511 DSU
A backplate bearing two 25-pin connectors
Two V.35 adapter cables
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 7511-A2-GN10-10 January 1999 Cables You May Need to Order You will need cables to connect your Network Interface Module (NIM) to thenetwork and your 7511 DSUs to DTEs. For further information refer to thedocumentation shipped with your NIM, and Appendix A, Cables and Pin Assignments, in the User’s...
3 7511-A2-GN10-10 January 1999 S1 97-15396 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON 1 2 3 4 5 6 7 8 ON S2 S3 S4 S5 Figure 1. Model 7511 Switch Locations Table 1. Configuration Options (1 of 5) Switch Options and Usage Default in Bold Line Rate S1-1 (DSU A)S3-1 (DSU...
8 7511-A2-GN10-10 January 1999 Installing the Rear Connector Plate Procedure To install the rear connector plate: 1. At the rear of the carrier, place the tab on the connector plate in its slot in the carrier’s backplane. The connector plate must use the same slot positionintended for the DSU card. ...
