Paradyne 6351 - Manual

Paradyne 6351

Paradyne 6351 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
Page: / 146

Table of Contents:

  • Page 2 – Notice; Document Feedback
  • Page 3 – Contents; About This Guide; vii; Introduction to Hotwire DSL Routers
  • Page 4 – ii; DSL Router Configuration Examples; Unnumbered DSL Interface with Proxy ARP Configuration Example; Monitoring the DSL Router
  • Page 5 – iii; Diagnostics and Troubleshooting
  • Page 6 – iv; B Configuration Defaults and Command Line Shortcuts
  • Page 7 – E Firmware Upgrade
  • Page 9 – Document Purpose and Intended Audience; Hotwire 6351 ReachDSL Router
  • Page 10 – viii; New Features for this Release; This version of the
  • Page 11 – ix; Document Summary; Library; Section
  • Page 12 – Product-Related Documents; Paradyne documents are also available on the World Wide Web at; Document Number; Hotwire 6351 ReachDSL Router Installation Instructions
  • Page 13 – xi; Document Conventions; Convention; Italics; Bold
  • Page 14 – xii
  • Page 15 – What is a Hotwire DSL Router?; The Hotwire; DSL Technologies Supported
  • Page 16 – Typical DSL Router System; — Hotwire 6301 IDSL Router with one Ethernet port
  • Page 17 – Hotwire DSL Router Features; IP routing with
  • Page 18 – Console Terminal Interface.; Service Subscriber; The DSL Sourcebook.
  • Page 19 – Accessing the DSL Router; Access Control to the DSL Router; Levels of Access; Administrator; Command Line Interface
  • Page 20 – Local Console Access; Changing Access Session Levels; Exiting from the System
  • Page 21 – Setting Up the New User’s Login; Procedure; your new login ID; Invalid Characters
  • Page 22 – password admin; new password; save; Telnet Access; Hotwire Management; To set up Telnet access from the service domain:; configure terminal
  • Page 23 – telnet name create; level login ID password; telnet login enable; Determining the Current Access Level; CUSTOMER; Determining the Available Commands; help
  • Page 24 – Using the List Command; list; appears. Pressing any key displays the next page.; list config; DSL Router Terminal Emulation; Changing the System Identity; and sysLocation MIB entries are not displayed.; To change System identity from the factory default of; new system identity
  • Page 25 – Manually Logging Out; logout; exit; exit; exit
  • Page 26 – Automatically Logging Out
  • Page 27 – Configuring the DSL Router; DSL Router Configuration Overview; For more information on supported RFCs, refer to; The DSL Router’s Interfaces; DSL Interface; The router ’s interface type is determined by its model number:
  • Page 28 – Ethernet Interface; — Hotwire 6302 IDSL and 6342 SDSL Routers have a hub configuration; This is the default; Interface Identifiers; The following conventions are used for naming router interfaces:; Service Domain IP Address Assignments; Hotwire DSL Routers support multiple service domains.
  • Page 29 – Numbered DSL or Ethernet Interface; Simplified Network Topology
  • Page 30 – IP Routing; Refer to; IP Options Processing; Strict source and record route (type 133)
  • Page 31 – Network Considerations
  • Page 32 – show arp; Dynamic Host Configuration Protocol; Proxy ARP; IP Protocol Type Filtering
  • Page 33 – NAT allows hosts in a private (local) network to transparently; Basic NAT; host appears to have an unique IP address.; IP addresses
  • Page 34 – Simultaneous Basic NAT and NAPT
  • Page 35 – Dynamic Host Configuration Protocol (DHCP) Server; DHCP setup considerations:
  • Page 36 – DHCP Relay Agent; DHCP relay agent setup considerations include the following:
  • Page 37 – Security
  • Page 38 – Ethernet Type Filtering; MAC frames can be filtered based on the:; Land Bug/Smurf Attack Prevention; Land Bug; – The router drops all packets received on its DSL or Ethernet; Smurf Attack; – The router does not forward directed broadcasts on its DSL
  • Page 39 – Routed vs. Bridged PDUs
  • Page 40 – 483 Routed Network Model (Standard mode); PPPoE Client Support; PPPoE Client Commands
  • Page 43 – Configuration Examples; The Hotwire DSL Router configuration examples include:
  • Page 44 – configurations, providing only a few of the possible scenarios.; Basic Bridging Configuration Example; configure factory; the DSL port must be configured for EtherHDLC at the line card.
  • Page 45 – Basic Routing Configuration Example
  • Page 46 – telnet enable; Basic NAT Configuration Example; In this Basic NAT example:; NAT Mapping Public IP Addresses
  • Page 48 – NAPT Configuration Example; In this NAPT example:; ip routing enable
  • Page 49 – — The; command is only required when using; ip route create; command is not necessary when using FUNI/MPOA link
  • Page 50 – Simultaneous Basic NAT and NAPT Configuration Example; In this Simultaneous Basic NAT and NAPT example:
  • Page 51 – — FUNI/MPOA (1483 routed) link encapsulation can be used with this; and; proxy arp dsl1 enable; commands are not
  • Page 53 – DHCP Relay with Proxy ARP Configuration Example
  • Page 54 – DHCP Server with Basic NAT Configuration Example
  • Page 55 – PPPoE Client with NAPT and DHCP Server Configuration Example; In this PPPoE client with NAPT and DHCP server example:
  • Page 56 – Downstream Router Configuration Example
  • Page 57 – IP Passthrough Configuration Example; The commands and syntax for this example are:
  • Page 59 – Monitoring the Router; LEDs; On the DSL router’s front panel. Refer to; Status Messages; For the Ethernet and DSL interface links. Refer to; Performance Statistics; SNMP Traps; Traps and MIBs
  • Page 60 – LED Status; Condition in; BOLD; shows what the LED should display after a successful; Front Panel LEDs
  • Page 61 – Interface Status; show interface; show statistics; Clearing Statistics; Clearing Statistics Command
  • Page 62 – Reasons for Discarded Data; The router may discard frames or packets, shown when the; See; show statistics eth1; Command Line; Reasons for Ethernet Interface (eth1) Discarded Frames
  • Page 63 – show statistics dsl1; Reasons for DSL Interface (dsl1) Discarded Frames
  • Page 64 – show statistics ip; Reasons for IP Processing Discarded Packets
  • Page 65 – show statistics bridge; show statistics pppoe; Reasons for Bridge Discarded Frames
  • Page 66 – Reasons for PPP Discarded Frames
  • Page 67 – Diagnostics and Troubleshooting Overview; Device Restart; Restart; Alarms Inquiry; show alarms; show alarms
  • Page 68 – System Log; syslog enable; The Management Controller Card (MCC) always has SYSLOG enabled.; show syslog; port; syslog
  • Page 69 – level; syslog level ERR; restart
  • Page 70 – SYSLOG Events; SYSLOG Messages
  • Page 71 – SYSLOG Message Display; Ping; Ping Command; interface
  • Page 72 – Ping Test Results; Ping test results display in the following formats.; nn; Ping reply from; For an ICMP echo response of an unreachable destination:; Ping reply from
  • Page 73 – TraceRoute; TraceRoute Command
  • Page 74 – TraceRoute Test Results; TraceRoute results display in the following format:; Tracing route to; byte packet
  • Page 75 – Command Line Interface Capability; Configuration Defaults and Command Line Shortcuts
  • Page 76 – Navigating the Router’s CLI
  • Page 77 – CLI Commands; The following types of commands are included in this section:
  • Page 78 – Configuration Commands; To show a configuration, refer to; show config
  • Page 79 – RFC 1483 Encapsulation Command; RFP 1483 Encapsulation Command; Ethernet Frame Format Command
  • Page 80 – Interface and Service Domain IP Address Commands; primary
  • Page 81 – IP Routing Commands; create
  • Page 82 – Bridge Commands; ifn
  • Page 83 – ARP Commands; priority; enable; arp timeout incomplete [; time; arp timeout complete [; time
  • Page 84 – Proxy ARP Command; proxy arp dsl1 disable
  • Page 85 – NAT Commands
  • Page 86 – nat napt purge; nat napt map
  • Page 88 – DHCP Server Commands; Domain Name
  • Page 89 – domain; dhcp server nameserver
  • Page 90 – DHCP Relay Agent Commands; dhcp relay; dhcp relay enable; dhcp relay address
  • Page 91 – IP Packet Processing Commands; Table A-12. IP Packet Processing Commands
  • Page 92 – pppoe
  • Page 93 – ppp
  • Page 94 – ppp username; username; ppp password; password
  • Page 95 – Telnet Commands
  • Page 96 – autologout
  • Page 97 – clear statistics eth1
  • Page 98 – show arp timeout
  • Page 99 – show console
  • Page 100 – show dhcp relay; show dhcp server; Operator
  • Page 101 – none; show interface dsl1
  • Page 102 – show log; show nat basic; show nat napt
  • Page 103 – show pppoe
  • Page 109 – Configuration Default Settings; Table B-1, Default Configuration Settings; Configuration Option
  • Page 111 – Command Line Shortcuts; Text in; bold; is the minimum input for each command line entry.
  • Page 112 – Command
  • Page 115 – SNMP Overview; See the; Traps Overview; Technical Support
  • Page 116 – , lists the traps supported by the DSL router. All traps; DSL Router Traps
  • Page 117 – MIBs Overview; Standard MIBs; System Group
  • Page 118 – Object
  • Page 119 – , for the objects supported for the DSL and; noSuchName
  • Page 121 – Extension to Interfaces Table
  • Page 122 – , provides clarification for objects contained in the IP; IP Group Objects; The default is 64
  • Page 124 – Transmission Group
  • Page 125 – Paradyne Enterprise MIBs
  • Page 126 – Device Control MIB; Device Control Table Objects
  • Page 127 – Device Diagnostics MIB; applNewTestId object in; noOp
  • Page 130 – Health and Status MIB; Device Status Group Objects Table
  • Page 131 – Configuration MIB; Device Configuration Copy Group; Table C-10. Device Configuration Copy Group Objects Table
  • Page 132 – Interface Configuration MIB; Table C-11, Interface Configuration Group Objects Table; ARP MIB; clear; NAT MIB; Network Address Translation Group
  • Page 133 – DHCP MIB; DHCP Server Configuration Group
  • Page 134 – DSL Endpoint MIB; Endpoint Configuration Group Objects Table; SYSLOG MIB; pdn_IfExtConfigIPRoutedPDUs; Table C-12. DSL Endpoint Configuration Group Objects Table
  • Page 135 – Accessing the List Command Output
  • Page 136 – Terminal Emulation Programs; HyperTerminal; Transfer; Online
  • Page 137 – Firmware Upgrade; Overview; download; apply download
  • Page 138 – Firmware Upgrade Procedures; Downloading will affect user data performance.
  • Page 139 – You are then prompted for a command confirmation:; Applying download will result in a system reset.
  • Page 141 – Index; Symbols
Loading the manual

Hotwire

®

DSL Routers

Models 6301, 6302, 6341, 6342,

6351, and 6371

User’s Guide

Document No. 6300-A2-GB20-10

November 2003

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Notice; Document Feedback

A November 2003 6300-A2-GB20-10 Copyright © 2003 Paradyne Corporation.All rights reserved.Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated i...

Page 3 - Contents; About This Guide; vii; Introduction to Hotwire DSL Routers

6300-A2-GB20-10 November 2003 i Contents About This Guide „ Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . vii „ New Features for this Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii „ Document Summary . . . . . . . . . . . . . . . . . . . ....

Page 4 - ii; DSL Router Configuration Examples; Unnumbered DSL Interface with Proxy ARP Configuration Example; Monitoring the DSL Router

Contents ii November 2003 6300-A2-GB20-10 „ Service Domain IP Address Assignments . . . . . . . . . . . . . . . . . . . . . . 3-2 Numbered DSL or Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . 3-3 Unnumbered DSL Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-...

Other Paradyne Models

All Paradyne Other