Paradyne 5038-A1-00 - Manual
Paradyne 5038-A1-00 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – What Does the 5038 Distributed POTS Splitter Do?; Network
- Page 3 – Installing the POTS Splitter Without an RTU; Customer; Procedure; Unplug the existing cable from the local loop to the telephone.
- Page 4 – Installing the POTS Splitter With an RTU; Unplug the existing cable from the local loop.; Hotwire RTU
- Page 5 – Optional Alternative Placement; Use a drill to install the plastic anchors.
- Page 6 – 038 Distributed POTS Splitter Technical Specifications; Item; Height x Width x Depth
- Page 7 – Important Safety Instructions; Notice to Users of the Telephone Network
- Page 8 – No repairs may be performed by the end user.
98-15838
Distributed
POTS Splitter
TM
1
Hotwire 5038 Distributed POTS Splitter
Customer Premises
Installation Instructions
Document Number 5038-A2-GN10-00
February 1998
Before You Begin
The 5038 Distributed POTS (Plain Old
Telephone Service) Splitter works in
conjunction with a Remote Termination
Unit (RTU). Verify that the local loop is
connected to the POTS/DSL network.
For RADSL (Rate Adaptive Digital Subscriber
Line) RTU installation information, refer to the
appropriate RTU document:
Document Number
Document Title
5216-A2-GN10
Hotwire 5216 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
5246-A2-GN10
Hotwire 5246 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
5446-A2-GN10
Hotwire 5446 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
5620-A2-GN10
Hotwire 5620 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
Contact your sales or service representative to order additional product documentation.
Paradyne documents are also available on the World Wide Web at:
http://www.paradyne.com
Select
Service & Support
→
Technical Manuals
Package Checklist
Verify that your package contains the following:
-
Model 5038 Distributed POTS Splitter
-
Local loop interface cable
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 What Does the 5038 Distributed POTS Splitter Do? The 5038 Distributed POTS Splitter and Hotwire Remote Termination Unit (RTU) arecomponents in the RADSL Access System. This system provides high-speed Internetor corporate LAN access over traditional twisted-pair copper telephone wiring. The POTS sp...
3 Installing the POTS Splitter Without an RTU Each POTS splitter connected to a phone without an RTU uses two cables with RJ11connectors. The two cables are installed: H From the Local Loop to the POTS splitter (supplied cable) H From the POTS splitter to the telephone (existing cable) 98-158 1 3 PO...
4 Installing the POTS Splitter With an RTU The POTS splitter connected to the RTU uses three cables with RJ11 connectors. The three cables are installed: H From the Local Loop to the POTS splitter (supplied cable) H From the POTS splitter to the telephone (existing cable) H From the POTS splitter to...
