Page 2 - Table of contents; How to use this manual; Click/Tap this icon to jump to “Table of contents”.
- 2 - Table of contents Accessories ............................................................................................. 3Unit care .................................................................................................. 4Control reference guide.......................................
Page 3 - Accessories; Wall mounting accessories
- 3 - Accessories ≥ Do not use AC power supply cord (AC mains lead) with other equipment. ≥ Product numbers provided in this owner’s manual are correct as of May 2014. These may be subject to change. 1 AC power supply cord (AC mains lead) (K2CB2CB00022) (K2CT2YY00097) (K2CQ2YY00119) (K2CJ2YY00101) W...
Page 4 - Unit care; To dispose or transfer this unit; Disposal of Old Equipment
- 4 - Unit care Clean this unit with a soft, dry cloth. ≥ When cleaning the speaker covers, use a fine cloth. Do not use tissues or other materials that can fall apart. Small pieces may get stuck inside the speaker cover. ≥ Never use alcohol, paint thinner or benzine to clean this unit. ≥ Before usi...
Page 5 - Control reference guide; Top view
- 5 - Control reference guide 1 WPS pairing switch [-WPS] Enter WPS pairing mode ( l 17) / firmware update mode ( l 24) 2 Selector switch [AUX] Select AUX as the audio source ( l 23) 3 Volume control switch [VOL –]/[VOL +] 4 Standby/on switch [ Í /I] Touch to switch the unit from on to standby mode ...
Page 6 - Indicator illumination; Blinks once; Blinks
- 6 - Indicator illumination The indicator patterns illustrated below are displayed during normal operational conditions. Indicator Description Operation indicator (amber) Blinks once ≥ The unit detects the switch touched. Blinks twice ≥ The unit detects a valid operation performed by touching and h...
Page 7 - Blinks alternately; Blinks slowly
- 7 - Indicator Description Network indicator (blue/red) Blinks alternately ≥ The unit is carrying out an internal process. – Wait for approximately 60 seconds before the blinking stops. – Do not disconnect the AC power supply cord (AC mains lead). Doing so may cause malfunction or damage. Network i...
Page 8 - The unit is connected to the; The unit is connecting to the; Lights up; AUX is selected as the audio
- 8 - Indicator Description Network indicator (blue) Lights up ≥ The unit is connected to the network. Network indicator (red) Blinks ≥ The unit is connecting to the network. – When the network connection cannot be established, the blinking keeps going. Check the network connection. ( l 12) AUX indi...
Page 9 - Installation; This unit can be installed either vertically or horizontally.; Vertical; Speaker feet
- 9 - Installation This unit can be installed either vertically or horizontally. Install the unit with the speaker feet side down as shown below. ≥ The output sound will be automatically adjusted depending on the installation style. Vertical Horizontal Speaker feet Speaker feet
Page 10 - Connections; Automatic standby mode; This unit is designed to conserve its power consumption and save
- 10 - Connections ≥ This unit consumes a small amount of AC power ( l 33, 38) even when turned off. ≥ For the purpose of power conservation, the unit can be disconnected if you will not be using it for extended period of time. ≥ These speakers do not have magnetic shielding. Do not place them near ...
Page 11 - Connection of an external device
- 11 - ≥ For details, refer to the operating instructions of the device. Connection of an external device Audio cable (not supplied) Plug type: ‰ 3.5 mm ( 1 / 8 q ) stereo
Page 12 - Network settings; AllPlayTM smart media platform or DLNA feature. To use; Choose a network setting method from the following.; Turn the network standby on (; “Using an Internet browser” (; You can access this unit’s network settings from the Internet; “Using a LAN cable” (; You can make a stable connection to the network with a LAN
- 12 - Network settings You can stream music from a device on the network by using the Qualcomm ® AllPlay™ smart media platform or DLNA feature. To use these features, this unit must join the same network as the device. Choose a network setting method from the following. ≥ The setting will be cancel...
Page 13 - settings on the device.; Using an Internet browser
- 13 - ≥ The following steps are based on a smartphone. ≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi ® function. 1 Turn this unit on. 2 Go to Wi-Fi ® settings on the device. ≥ Proceed to the next step after the network indicator changes from blinking in blue and red to blinking in b...
Page 14 - Type a device name and then select “Next”.
- 14 - 4 Start the Internet browser on the device to display the settings page. ≥ [iOS] : The settings page will be automatically displayed. ≥ [Except_iOS] : Once you open the Internet browser, the settings page will be displayed– If the settings page is not displayed, type “http://172.19.42.1/” int...
Page 15 - Select “Connect” to apply the settings.; If the network indicator does not light up, check the network name
- 15 - 6 Select your network name (SSID) and type the password. ≥ Check the wireless router for the network name (SSID) and the password. ≥ A list of network names (SSIDs) will be appeared when you select the “Network Name” box. ≥ To show the characters typed in the “Password” box, select “Show Pass...
Page 16 - Make sure the device is connected to your network.; Network standby; unit as the output speakers.
- 16 - 8 Make sure the device is connected to your network. ≥ Enable Java and cookies in your browser settings. ∫ Network standby This unit will turn on automatically from standby mode when you select the unit as the output speakers. Touch and hold both [-WPS] and [VOL +] until the mode indicator (a...
Page 17 - Do not connect a LAN cable. Doing so will disable the Wi-Fi function.; Press the WPS button on the wireless router.; Using the WPS PIN code; After step 2; Enter the PIN code “64428147” into the wireless router.; A compatible wireless router may have the WPS
- 17 - ≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi function. 1 Turn this unit on. ≥ Proceed to the next step after the network indicator changes from blinking in blue and red to blinking in blue.– The blinking in blue starts after approximately 60 seconds. If the blinking in blue d...
Page 18 - Connect this unit to a broadband router, etc. using a LAN cable.; Using a LAN cable
- 18 - 1 Disconnect the AC power supply cord (AC mains lead). 2 Connect this unit to a broadband router, etc. using a LAN cable. 3 Connect the AC power supply cord (AC mains lead) to this unit, and turn the unit on. ≥ When the connection is established, the network indicator (blue) lights up. ≥ Use ...
Page 19 - To make network-related settings
- 19 - You can change this unit’s name on the network, and use specific IP address, subnet mask, default gateway, primary DNS, etc. Preparation ≥ Complete the network settings. 1 Check this unit’s IP address ( l 26), and note it down. 2 Connect your device to the same network as this unit. 3 Start a...
Page 20 - Enjoying music; You can enjoy music on your home network, online music services, and; Preparation; Connect the following devices to the same network as this unit.; Start the app “Panasonic Music Streaming”.; Select a song to playback.; Home network
- 20 - Enjoying music You can enjoy music on your home network, online music services, and an external device (AUX input). To stream music from the device on the network to this unit as AllPlay/ DLNA speakers, you need to download the app “Panasonic Music Streaming” (free of charge), etc. ≥ [iOS] : ...
Page 21 - as the output speakers.
- 21 - 5 [iOS] : From “ ”, select this unit as the output speakers. [Android] : From “Select Speaker”, select this unit as the output speakers. ≥ If you have multiple AllPlay speakers, you can enjoy synchronized sound from them. Select “ ” and then select the speakers to group. – You can also play d...
Page 22 - Make sure that the network is connected to the Internet.; Start the app, and select a song to playback.; Using Spotify; Spotify is not available.; Online music services
- 22 - This unit is compatible with several music services. Visit the following website for the compatibility information. www.panasonic.com/global/consumer/homeav/allseries/service Preparation ≥ Make sure that the network is connected to the Internet. ≥ Connect a device with a compatible app instal...
Page 23 - Using online music services other than Spotify; AUX input
- 23 - ∫ Using online music services other than Spotify After step 2 3 From “ ”, select this unit as the output speakers. ≥ Depending on the service, you might need to open full screen player to display “ ”. ≥ If you have multiple AllPlay speakers, you can enjoy synchronized sound from them. Select ...
Page 24 - Firmware updates; may add or improve the way a feature operates. These updates are
- 24 - Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. Preparation ≥ Connect this unit to the network. ( l 12) – Make sure that the network is connected to the Internet...
Page 25 - Others; Operation sound setting
- 25 - Others You can turn the beep sound on/off. Touch and hold both [-WPS] and [VOL –] until the mode indicator (amber) blinks. The indicator blinks once: on (default) The indicator blinks twice: off ≥ If the network indicator is blinking in blue and red, wait until the blinking stops. To check th...
Page 26 - To check the unit’s IP address and the MAC address.; Download the app “Panasonic Music Streaming”. (; IP address
- 26 - To check the unit’s IP address and the MAC address. Preparation ≥ Download the app “Panasonic Music Streaming”. ( l 20) 1 Start the app “Panasonic Music Streaming”. 2 [iOS] : Select “ ”. [Android] : Select “Select Speaker”. 3 Select “ ”. 4 Touch and hold “Group” in the title bar at the top. ≥...
Page 27 - Turn the unit off and disconnect the AC power supply cord (AC mains
- 27 - Attaching to a wall (optional) Consult a qualified building contractor when attaching the unit to a wall. Preparation ≥ Turn the unit off and disconnect the AC power supply cord (AC mains lead) from the AC outlet. ≥ Make sure the location to place the unit has a stable Wi-Fi connection. ( l 2...
Page 28 - Attach the fall prevention cord to the unit.; Space required
- 28 - 2 Attach the fall prevention cord to the unit. ≥ Use a cord that is capable of supporting over 50 k g (110 lbs) with a diameter of about 1.5 mm ( 1 / 16 q ). 3 Attach the wall mount brackets to the wall, and then hook the unit securely onto them. ≥ Make sure that the wall and the screws are c...
Page 29 - Drive a screw to secure the safety holder onto the wall.; Attach the fall prevention cord to the wall.
- 29 - 4 Drive a screw to secure the safety holder onto the wall. ≥ Refer to step 3 for requirements before screwing. 5 Attach the fall prevention cord to the wall. ≥ Make sure that the slack of the cord is minimal. Screw (not supplied) Safety holder (supplied) Fix to the wall Cord (not supplied) Wa...
Page 30 - Troubleshooting; Before requesting service, make the following checks.; To return all settings to the factory defaults; While continuing to hold [; Humming heard during playback.; The unit needs to be repaired. Consult your dealer.; Do you have the latest firmware installed?; General
- 30 - Troubleshooting Before requesting service, make the following checks. If the problem remains unresolved, consult your dealer for instructions. Refer to the limited warranty on the “Owner’s Manual <Setup>”. To return all settings to the factory defaults 1 Turn this unit on. ≥ If the netw...
Page 31 - The update has been failed. Touch any switch, and then try again.; Cannot connect to the network.; Turn off “Network standby” (
- 31 - The mode indicator (amber) keeps blinking twice. ≥ This unit is not connected to the network. Touch any switch, and then check the network connection. ( l 12) The mode indicator (amber) keeps blinking three times. ≥ The update has been failed. Touch any switch, and then try again. The mode in...
Page 33 - Specifications; GENERAL; Power supply
- 33 - Specifications ∫ GENERAL Power supply AC 120 V, 60 Hz AC 220 V to 240 V, 50 Hz Power consumption 22 W Power consumption in standby mode Approx. 0.1 W Approx. 0.15 W (When “Network standby” is on) Approx. 3.0 W
Page 34 - AMPLIFIER SECTION
- 34 - Dimensions (W k H k D) 373 mm k 224 mm k 138 mm (14 11 / 16 qk 8 13 / 16 qk 5 7 / 16 q ) Mass (Weight) Approx. 4.2 k g (9.26 lbs) Operating temperature range 0 o C to r 40 o C ( r 32 o F to r 104 o F) Operating humidity range 35 % to 80 % RH (no condensation) ∫ AMPLIFIER SECTION RMS output po...
Page 38 - qk
- 38 - ∫ GENERAL Power supply AC 120 V, 60 Hz AC 220 V to 240 V, 50 Hz Power consumption 14 W Power consumption in standby mode Approx. 0.2 W (When “Network standby” is on) Approx. 3.0 W Dimensions (W k H k D) Horizontal placing 248 mm k 131 mm k 155 mm (9 3 / 4 qk 5 5 / 32 qk 6 3 / 32 q ) Vertical ...
Page 43 - Sales and Support Information
- 43 - Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.c...
