Page 2 - IMPORTANT SAFETY INSTRUCTIONS
2 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these ins...
Page 3 - Safety precautions
3 Safety precautions A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA. This device complies with Part 15 of FCC Rules and Innovation, Science...
Page 4 - Unit; Batteries; Allergies
4 ∫ Unit • Avoid using or placing this unit near sources of heat.• Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. • Keep this unit away from something susceptible ...
Page 5 - About Bluetooth
5 About Bluetooth ® ∫ Frequency band used This unit uses the 2.4 GHz frequency band. ∫ Certification of this unit • This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. • The actions below are punishable by law...
Page 6 - Table of contents; Before use; Operation
6 Table of contents IMPORTANT SAFETY INSTRUCTIONS .................................................................................................... 2Safety precautions ....................................................................................................................................
Page 7 - Accessories; Maintenance; Expressions used in this document; Marks denoting model names; x USB charging cord
Before use 7 Accessories Please check and identify the supplied accessories. To order accessories, contact the dealer from whom you have made your purchase. Only for U.S.A.:To order accessories, refer to “Limited Warranty”. Maintenance Clean this unit with a dry and soft cloth. • When the unit is ve...
Page 8 - Water resistance is not guaranteed under all conditions.
Before use 8 (Important) About water resistance Specifications for this unit are equivalent of IPX4 of IEC 60529, the protection level of electronic device enclosures that protects from splashes, and is not designed to be totally waterproof. ∫ About IPX4 (liquid ingress protection level against spla...
Page 9 - How to fit the earphones; How to remove the earpieces; How to attach the earpieces
Before use 9 How to fit the earphones 1 Check the orientation (up ( a ), down) and L (left) and R (right) of the earphones. 2 Fit firmly by turning the earphones a small amount at a time in the directions indicated by the arrow in the illustration. • Confirm that the earphones will not fall from you...
Page 10 - Part names; Earphones
Before use 10 Part names Main unit (earphones) ( Earphones hereafter in the instructions) a L side earphone (left) b R side earphone (right) *1 Examples of earphone LED lighting/blinking patterns *2 The battery is low when it is blinking in red.*3 Refer to page 12 for information about the earphone ...
Page 11 - Charging cradle
Before use 11 Main unit (charging cradle) ( Charging cradle hereafter in the instructions) *4 Refer to page 12 for information about the earphone LEDs lighting and blinking during charging. 11 Charging cradle lid12 Terminal section (for the L side earphone)13 Terminal section (for the R side earphon...
Page 12 - Charging; Note; ) to connect the charging cradle to a; Put the earphones into the charging cradle.
Preparation 12 Charging The chargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. • Proper charging is not possible if there is dust or droplets of water on the terminal sections of the earphones or charging cradle. Remove the dust or water dr...
Page 13 - Charging the earphones with the charging cradle
Preparation 13 3 Confirm that the earphone LEDs (red) have illuminated (charging starts). • The earphone LEDs light (red) while the earphones are charging. Charging is complete when they turn off.• Charging time ( l 26, “Specifications”) Note • Do not use any other USB charging cords except the supp...
Page 14 - Turning the earphones on and off; To turn the earphones on
Preparation 14 Turning the earphones on and off ∫ To turn the earphones on Take the earphones out of the charging cradle. • The earphones turn on. A beep will sound and the earphone LEDs blink (blue)* slowly.* The batteries are low when they are blinking in red. ∫ To turn the earphones off Put the e...
Page 15 - Using the app “Panasonic Audio Connect”; Start up the “Panasonic Audio Connect” app.
Preparation 15 Using the app “Panasonic Audio Connect” By creating a Bluetooth ® connection with a smartphone or tablet installed with the “Panasonic Audio Connect” app (free of charge), you can enjoy a wide variety of features, such as the following: • Software updates• Customization of various set...
Page 16 - Connecting a Bluetooth; device
Preparation 16 Connecting a Bluetooth ® device 1 Take both earphones (L and R) out of the charging cradle. • When pairing with a device for the first time: This unit will start to search for a Bluetooth ® device to connect to, and the earphone LEDs will light alternately in blue and red. • When pair...
Page 17 - Take the earphones out of the charging cradle.; Connecting a paired Bluetooth
Preparation 17 1 Take the earphones out of the charging cradle. • The earphone LEDs light (blue) and the earphones turn on about 3 seconds later. A beep will sound, and the earphone LEDs (blue)* will blink slowly.* The batteries are low when they are blinking in red. 2 Do Steps 2 to 3 of “Connecting...
Page 18 - Listening to music; Connect the Bluetooth; Attention
Operation 18 Listening to music If the Bluetooth ® compatible device supports the “A2DP” and “AVRCP” Bluetooth ® profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.• AVRCP (Audio/Video Remote Contro...
Page 19 - Making a phone call
Operation 19 Making a phone call With Bluetooth ® enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth ® profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication us...
Page 20 - Using the external sound control; Adjust the volume of the playback device.; Ambient sound
Operation 20 Using the external sound control The external sound control function switches between noise cancelling ( [RZ-S500W] only) ambient sound and off. The sound quality is set so that it is optimized for each mode. 1 While wearing the earphones, touch and hold the touch sensor (R) for about 2...
Page 21 - Useful functions
Operation 21 Useful functions By creating a Bluetooth ® connection with a smartphone installed with the “Panasonic Audio Connect” app (free of charge), you can enjoy a wide variety of features, such as changing the settings on the earphones. ( l 15) You can use a touch sensor on the earphone to acti...
Page 22 - Operating with the touch sensors
Operation 22 Operating with the touch sensors You can operate the touch sensors on the earphones to change to the Bluetooth ® pairing mode, or remote control the Bluetooth ® device. • Depending on the Bluetooth ® device or the app, even if you operate the touch sensors on the earphones, some functio...
Page 23 - Restoring to the factory settings; Take the R side earphone out of the charging cradle.; Do the same Steps 1 to 3 above for the L side earphone.
Other 23 Restoring to the factory settings When you want to delete all pairing device information, etc. in the earphones, you can restore the earphones to the factory settings (original settings upon purchase).Charge the earphones before restoring the earphones to their factory settings. 1 Take the ...
Page 24 - Troubleshooting; The device cannot be connected.; Sound and audio volume
Other 24 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” if you reside in the U.S.A., or refer to “CONTACT INFORMATION”...
Page 25 - General
Other 25 Cannot operate the earphones. • Try turning the power off and on. ( l 14) The left and right batteries deplete at different rates. • There may be some difference between left and right due to signal and usage conditions. Amazon Alexa is not responding. • Make sure that the Amazon Alexa app ...
Page 26 - Specifications
Other 26 Specifications ∫ General *1 It may be shorter depending on the operating conditions.*2 The time required to charge the battery from empty to full. RZ-S500W RZ-S300W Power supply (Charging cradle) DC 5 V, 500 mA Internal Battery Earphones: 3.7 V, Lithium polymer 85 mAhCharging cradle: 3.7 V,...
Page 28 - When disposing of the product
Other 28 When disposing of the product The built-in batteries are a valuable recyclable resource. When disposing of this unit, rather than disposing of in general waste (non-combustible garbage), follow the local national laws and take to the appropriate collection point. Contact your local governme...
Page 29 - Useful information; Customer Service; COUNTRY
Other 29 Useful information Customer Service Customer Service Directory COUNTRY WEB SITE CONTACT CENTER 800-7262 01-8000-947262 Dominican Rep. 01800-847-7262 Panama Colombia Ecuador Costa Rica El Salvador Guatemala Uruguay Paraguay Chile Peru Venezuela Mexico Argentina www.panasonic.com/pa/soporte/ ...
