Panasonic KX-TSC11W - Manual

5 Preparation For assistance, please call: 1-800-211-PANA(7262) Display (This display shows all of the possible configurations.) While the unit is not in use, the display shows the current time and date, and the number of new calls. If the display continuously shows “ 12:00 AM 12/31 ” or “ 0:00 12/3...

6 Settings Installing the Batteries 1 Press down in the direction of the arrow and remove the battery cover ( ). 2 Install the batteries in the proper order as shown ( ), matching the correct polarity. 3 Close the battery cover. • Batteries are not included in the unit.• Install three high quality “...

7 Preparation For assistance, please call: 1-800-211-PANA(7262) • Use only a Panasonic Handset for the KX-TSC11W or KX-TSC11B.• Use only a telephone line cord included in the unit.• If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services. Progra...

Settings 8 Time and Date You can select AM/PM or 24-hour clock by programming. Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Scroll to “ SET CLOCK ? ” by pressing [ ] or [ ] . 3 Press [ENTER] . 4 Enter the current year.(Ex. To set 2004, enter “04”.) • You can set the year ...

9 Preparation For assistance, please call: 1-800-211-PANA(7262) 8 Press [#] to select “AM”, “PM” or 24- hour clock.(Ex. You select “PM”.) • Each time you press [#] , the selection will change on the display. 9 Press [ENTER] . 10 Enter the current day and month using a 4-digit number. (Ex. To set Dec...

Settings 10 Dialing Mode You can select the dialing mode by programming. If you have touch tone service, set to Tone. If rotary or pulse service is used, set to Pulse. Your phone comes from the factory set to Tone. Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Scroll to “ ...

11 Preparation For assistance, please call: 1-800-211-PANA(7262) LCD Contrast You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 2. Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Scroll to “ LCD CONTRAST ? ” by pressin...

Settings 12 Caller ID Number Auto Edit Once you call back an edited number (p. 19), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, ...

13 Preparation For assistance, please call: 1-800-211-PANA(7262) Voice Mail Tone If your voice mail service sends a voice mail tone after a new message has finished recording, set to “ON”. “ ” icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice m...

Settings 14 Display Language You can select “English”, “French” or “Spanish” as the display language. Your phone comes from the factory set to “English”. Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Scroll to “ CHANGE LANGUAGE? ” by pressing [ ] or [ ] . 3 Press [ENTER] ....

15 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Making Calls To make a call, this unit can dial up by 2 methods as below steps. 1 Enter a phone number, then lift the handset.ORLift the handset, then dial a phone number. • The dialed number is displayed.• After a few seconds, the...

16 Answering Calls When a call is received, the unit rings, “ INCOMING CALL ” is displayed. If you subscribe to a Caller ID service, the calling party’s information will be displayed when the unit is ringing (see below). 1 When the unit rings, lift the handset. 2 When finished talking, hang up. • Wh...

17 Basic Operation For assistance, please call: 1-800-211-PANA(7262) • Caller information will not be displayed in the following cases: — If the caller dialed from an area which does not provide a Caller ID service, the display will show “ OUT OF AREA ”. — If the caller has requested not to display ...

Using the Caller List 18 Ex. When you search from the most recent call: * * If you receive a call from one of the same phone numbers stored in the Phone Book List, the caller’s name will be displayed (Private name display) . To see the phone number, press [ ] . Each time you press [ ] , the display ...

19 Basic Operation For assistance, please call: 1-800-211-PANA(7262) Calling Back from the Caller List 1 Press [ ] or [ ] to enter the Caller List. 2 Scroll to the desired caller by pressing [ ] or [ ] . • To exit the Caller List, press [FUNCTION/ EXIT] or wait for 60 seconds. 3 Lift the handset. • ...

21 Basic Operation For assistance, please call: 1-800-211-PANA(7262) 5 Press [ENTER] . • After a few seconds, the display will return to the Caller List. You can continue storing other items. To exit the Caller List, press [FUNCTION/EXIT] or wait for 60 seconds. • If the display shows “ PHONEBOOK FU...

22 Phone Book Storing Names and Phone Numbers in the Phone Book List You can store up to 50 names and phone numbers in memory. Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Press [ENTER] . • After a few second the display will change. 3 Enter a name, up to 15 characters wi...

23 Adv anced Operation For assistance, please call: 1-800-211-PANA(7262) 6 Press [ENTER] . • To continue storing other items, repeat from step 2. • The display will return to step 1. To exit the programming mode, press [FUNCTION/EXIT] or wait for 60 seconds. • If the display shows “ PHONEBOOK FULL ”...

Phone Book 24 Selecting characters to enter names The dialing buttons ( [0] to [9] ) can be used to enter letters and symbols. Pressing each button selects a character as shown below. If you make a mistake while entering a name Use [ ] or [ ] to move the cursor to the incorrect character, press [CLE...

25 Adv anced Operation For assistance, please call: 1-800-211-PANA(7262) Dialing from the Phone Book Make sure that the handset is on the cradle. 1 Press [ ] or [ ] to enter the Phone Book List. 2 Scroll to the desired item by pressing [ ] or [ ] . • All Phone book items are stored in the order show...

Phone Book 26 Index table Chain Dial You can dial a combination of the Phone Book or manual key pad entries while making a call. This feature can be used, for example, to first automatically dial a calling card access number that you have stored in the Phone Book, then manually or automatically dial...

27 Adv anced Operation For assistance, please call: 1-800-211-PANA(7262) Editing Make sure that the handset is on the cradle. 1 Press [ ] or [ ] to enter the Phone Book List. 2 Scroll to the Phone Book item you want to change by pressing [ ] or [ ] . • To search for the item by initial, see page 25....

28 Phone Book Erasing Make sure that the handset is on the cradle. 1 Press [ ] or [ ] to enter the Phone Book List. 2 Scroll to the Phone Book item that you want to erase by pressing [ ] or [ ] . • To search for the item by initial, see page 25. 3 Press [CLEAR] . • To stop erasing, press [ ] . 4 Pre...

29 Adv anced Operation For assistance, please call: 1-800-211-PANA(7262) Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) Press [TONE] before entering access numbers which require tone dialing. • The dialing mode changes to tone. You can enter numbers to access an answerin...

Special Features 30 Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your unit to display the second caller’s information. After you hear a call-waiting tone while talking, the unit will display the caller’s phone number and “ ”. • Please contact your telephone company for detail...

31 Adv anced Operation For assistance, please call: 1-800-211-PANA(7262) Setting the Password You can change the password for the call restriction. The factory preset password is “1111”. To set the password Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT] . 2 Scroll to “ CHANGE P...

Special Features 32 Call Restriction You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out except the emergency numbers stored in the Phone Book. To set the call restriction M...

33 Useful Inf ormation For assistance, please call: 1-800-211-PANA(7262) Wall Mounting This unit can be mounted on a wall phone plate. 1 Press the tabs in the direction of the arrows ( ), then remove the wall mounting adaptor ( ). 2 Tuck the telephone line cord inside the wall mounting adaptor, and ...

34 Battery Replacement If “ ” flashes, the battery power is low. Install new batteries as soon as possible. If batteries are not replaced even after the “ ” is displayed, the unit may not work properly. 1 Disconnect the telephone line cord from the unit. 2 Press down in the direction of the arrow an...

35 Useful Inf ormation For assistance, please call: 1-800-211-PANA(7262) Troubleshooting Problem Cause and Remedy The unit does not work. • Check the settings (p. 6 – 14).• Remove the batteries and reinstall them to reset the unit. The unit does not ring. • The ringer selector is set to OFF. Set to ...

37 Useful Inf ormation For assistance, please call: 1-800-211-PANA(7262) Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warni...

39 Useful Inf ormation For assistance, please call: 1-800-211-PANA(7262) Specifications Power Source: From 3 AA (R6, UM-3, LR6) batteries Dimensions (H x W x D): Approx. 96 mm x 150 mm x 200 mm (3 25 / 32 " x 5 29 / 32 " x 7 7 / 8 ") Mass (Weight): Approx. 550 g (1.21 lb.) Dialing Mode: ...

40 FCC and Other Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ-----. If requested, this number must be provided t...

42 Index A Accessories: 2Answering Calls: 16 B Battery Installation: 6Battery Replacement: 34 C Call Restriction: 32Call Waiting: 29Caller ID Number Auto Edit: 12Caller ID Service: 16Caller List Calling Back:19Editing: 19Erasing: 21Storing: 20Viewing: 17 D Dialing Mode: 10Display: 5 F FCC and Other ...

✄ 43 For assistance, please call: 1-800-211-PANA(7262) Warranty E-PQ Q X14369WA. book 43 ページ ２００５年３月３０日 水曜日 午後２時１１分

45 For assistance, please call: 1-800-211-PANA(7262) Customer services Customer Services E-PQ Q X14369WA. book 45 ページ ２００５年３月３０日 水曜日 午後２時１１分

Copyright: This material is copyrighted by Panasonic Communications (Malaysia) Sdn. Bhd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications (Malaysia) Sdn. Bhd. Panasonic Consumer Electronic...