Panasonic KX-TG722AL - Manual

For your safety To prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product. WARNING Power connection R Use only the power source marked on theproduct. R Do not overload power outlets andextension cords. T...

R Use caution when installing or modifyingtelephone lines. R The AC adaptor is used as the maindisconnect device. Ensure that the ACoutlet is installed near the product and iseasily accessible. R This product is unable to make calls when:– the handset batteries need recharging or have failed. – ther...

– away from electronic appliances such as TVs, radios, personal computers,wireless devices, or other phones. – facing away from radio frequency transmitters, such as external antennasof mobile phone cell stations. (Avoidputting the base unit on a bay window ornear a window.) R Coverage and voice qua...

Maximum: Approx. 1.8 W R Operating conditions: 0 °C – 40 °C, 20 % – 80 % relative airhumidity (dry) Note: R Design and specifications are subject tochange without notice. R The illustrations in these instructions mayvary slightly from the actual product. 8 Important Information TG2721_22AL(en)_0730_...

Setting up Connections R Use only the supplied Panasonic ACadaptor PNLV226AL. R When mounting the unit on a wall, seepage 39. n Base unit Use only the supplied telephone line cord. Hook “Click” Press plug firmly. *DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service. Correct Incor...

Note when setting up Note for connections R The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.) R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as...

Controls Handset A E F G I J L M K A BCD H Speaker M N (Phonebook/Clear) M N (Speakerphone) M N (Talk) Dial keypadReceiverDisplay M N (Menu/OK) M N (Mute/Pause) M R/ECO N R: Recall/Flash ECO: Eco mode shortcut key M N (Off/Power) MicrophoneCharge contacts Navigator key – MDN , MCN , MFN , or MEN : S...

Display Handset display items Item Meaning Range status: The morebars visible, the closer thehandset is to the base unit. R When is flashing: Handset is searchingfor base unit.(page 35) Handset is accessing baseunit (intercom *1 , paging, changing base unitsettings, etc.).Handset is on an outsidecal...

R You can select 24-hour or 12-hourclock format ( “ AM ” or “ PM ” ) by pressing * . 6 M N a M N Note: R The date and time may be incorrect after apower failure. In this case, set the date andtime again. One touch eco mode The M R/ECO N button on the handset enables you to activate the eco function ...

Making calls 1 Lift the handset and dial the phonenumber. R To correct a digit, press M N . 2 M N 3 When you finish talking, press M N or place the handset on the base unit orcharger. Using the speakerphone 1 Dial the phone number and press M N . R Speak alternately with the other party. 2 When you ...

Temporary handset ringer off While the handset is ringing for a call, you canturn the ringer off temporarily by pressing M N . Useful features during a call Hold This feature allows you to put an outside callon hold. 1 Press M N during an outside call. 2 MbN : “ Hold ” a M N 3 To release hold, press...

Handset phonebook The phonebook allows you to make callswithout having to dial manually. You can add50 names and phone numbers. Adding entries1 M N a M N 2 MbN : “ New Entry ” a M N 3 Enter the party’s name (16 charactersmax.). a M N R You can change the character entrymode by pressing M N (page 32)...

3 Enter the handset number you wish tosend the phonebook entry to. R When an entry has been copied, “ Completed ” is displayed. R To continue copying another entry: MbN : “ Yes ” a M N a MbN : Select the desired entry. a M N 4 M N Copying all entries 1 M N a M N 2 MbN : “ Copy All ” a M N 3 Enter th...

Programmable settings You can customise the unit by programming the following features using the handset. Scrolling through the display menus1 M N 2 Press MCN or MDN to select the desired main menu. a M N 3 Press MCN or MDN to select the desired item in sub-menu 1. a M N R In some cases, you may nee...

*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *7 If you do not want the unit to ring before the caller information is received, set to “ Off ” . (Caller ID subscribers only)You can only remov...

4 Enter an area code (5 digits max.). a M N a M N Increasing the range of the baseunit You can increase the signal range of the baseunit by using a DECT repeater. Please useonly the Panasonic DECT repeater noted onpage 4. Contact your Panasonic dealer fordetails. Important: R Before registering the ...

Using Caller ID service Important: R This unit is Caller ID compatible. To useCaller ID features (such as displaying callerphone numbers), you must subscribe to aCaller ID service. Contact your serviceprovider/telephone company for details. Caller ID features When an outside call is being received, ...

Viewing the caller list and callingback1 MFN ( ) 2 Press MCN to search from the most recent call, or press MDN to search from the oldest call. 3 To call back, press M N . To exit, press M N . Note: R If the entry has already been viewed oranswered, “ ” is displayed, even if it wasviewed or answered ...

Answering system The answering system can answer and recordcalls for you when you are unavailable toanswer the phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “ Greeting Only ” as the recording time setting (page 28). Important: R Only 1 person...

Recording your greeting message1 M N 2 MbN : “ Answer System ” a M N 3 MbN : “ Greeting ” a M N 4 MbN : “ Start REC ” a M N 5 MbN : “ Yes ” a M N 6 After a beep sounds, hold the handsetabout 20 cm away and speak clearly intothe microphone (2 minutes and 30seconds max.). 7 Press M N to stop recording...

Listening to messages using the handset When new messages have been recorded, “ Messages ” is displayed on the handset with the total number of new messages. 1 M N 2 MbN : “ Answer System ” a M N 3 MbN : Select “ Play New Msg. ” or “ Play All Msg. ” . a M N 4 When finished, press M N . Note: R To sw...

Remote access code A 3-digit remote access code must be enteredwhen operating the answering systemremotely. This code prevents unauthorisedparties from listening to your messagesremotely. Important: R In order to operate the answering systemremotely, you must first set a remoteaccess code. 1 M N 2 M...

3 Enter your remote access code within 10seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter yourremote access code again and beginremote operation (page 26). Answering system settings Number of rings before the unitanswers a call You can change the...

Voice mail service Voice mail is an automatic answering serviceoffered by your service provider/telephonecompany. After you subscribe to this service,your service provider/telephone company’svoice mail system answers calls for you whenyou are unavailable to answer the phone orwhen your line is busy....

Intercom Available for: KX-TG2722 Intercom calls can be made betweenhandsets. Note: R When paging the handset, the pagedhandset beeps for 1 minute. R If you receive an outside call while talkingon the intercom, you hear 2 tones. Toanswer the call, press M N , then press M N . Making an intercom call...

Character entry The dial keys are used to enter characters and numbers. Each dial key has multiple charactersassigned to it. The characters that can be entered depend on the character entry mode(page 32).– Press MFN or MEN to move the cursor left or right. – Press dial keys to enter characters and n...

Extended 1 character table ( ) R The following are used for both uppercase and lowercase: Extended 2 character table ( ) R The following are used for both uppercase and lowercase: Cyrillic character table ( ) 33 Useful Information TG2721_22AL(en)_0730_ver001.pdf 33 TG2721_22AL(en)_0730_ver001.pdf 33...

Error messages Display message Cause/solution Error R Recording was too short. Try again. Failed R Phonebook copy failed (page 16). Confirm the other handset(the receiver) is in standby mode and try again. Incomplete R The receiver’s phonebook memory is full. Erase the unwantedphonebook entries from...

Problem Cause/solution I cannot hear a dial tone. R Make sure that you are using the supplied telephone line cord.Your old telephone line cord may have a different wiringconfiguration. R The base unit’s AC adaptor or telephone line cord is notconnected. Check the connections. R Disconnect the base u...

Problem Cause/solution Noise is heard, sound cutsin and out. R You are using the handset or base unit in an area with highelectrical interference. Re-position the base unit and use thehandset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recom...

Answering system Problem Cause/solution The unit does not recordnew messages. R The answering system is turned off. Turn it on (page 24). R The message memory is full. Erase unwanted messages(page 25). R The recording time is set to “ Greeting Only ” . Change the setting (page 28). R If you subscrib...

Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of theunit. R Drive the screws (not supplied) into the wall. n Base unit n Charger 50 mm Screws Hook Longer than 20 mm Space (6 mm) 25 mm Screws Hooks Longer than 20 mm Space (5 mm) Wall mount...

Index A Alarm: 20 Answering calls: 14 Answering system: 24 Call screening: 24 Erasing messages: 25 , 26 , 27 Greeting message: 24 Greeting only: 28 Listening to messages: 25 , 26 , 27 Number of rings: 28 Recording time: 28 Remote access code: 27 Remote operation: 26 Turning on/off: 24 , 26 , 27 Area...

41 Notes TG2721_22AL(en)_0730_ver001.pdf 41 TG2721_22AL(en)_0730_ver001.pdf 41 2012/07/30 16:53:06 2012/07/30 16:53:06

For your future reference We recommend keeping a record of the following information to assist with any repair underwarranty. Serial No. Date of purchase (found on the bottom of the base unit)Name and address of dealer Attach your purchase receipt here. Customer Care Centre Tel. No.: 132600or websit...