Page 2 - Table of Contents
Table of Contents 2 Introduction Your phone . . . . . . . . . . . . . . . . . . . . 4 Accessory information . . . . . . . . . . . . . . 5Important safety instructions . . . . . . . . . 6For best performance . . . . . . . . . . . . . . . 8 Preparation Connections . . . . . . . . . . . . . . . . . . ....
Page 3 - Index
Table of Contents 3 General use . . . . . . . . . . . . . . . . . . . 45Programmable settings . . . . . . . . . . 45Making/answering calls, Intercom . . 46Phonebook. . . . . . . . . . . . . . . . . . . . 46Caller ID . . . . . . . . . . . . . . . . . . . . . . 47Battery charge . . . . . . . . . . . ....
Page 4 - Introduction; Thank you for purchasing a Panasonic cordless telephone.; Your phone
Introduction 4 Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. Attach your purchase receipt here. Your phone L References in these operating instructions to the charger and to the other handset are for KX-TG582...
Page 5 - Accessory information; Included accessories
Introduction 5 Accessory information Included accessories Additional/replacement accessories No. Accessory items Quantity KX-TG5821AL KX-TG5822AL 1 AC adaptor for base unit 1 1 2 Telephone line cord 1 1 3 Telephone plug 1 1 4 Wall mounting adaptor 1 1 5 Battery 1 2 6 Handset cover 1 2 7 Belt clip 1 ...
Page 6 - Installation
Introduction 6 Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.1. Read and understand all instructions.2. Follow all warnings and instructions marked on this unit. 3. Unplug this uni...
Page 7 - Battery
Introduction 7 L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. L Use only the ba...
Page 8 - For best performance; Base unit location/noise; Environment
Introduction 8 For best performance Base unit location/noise The base unit and handset use radio waves to communicate with each other.For maximum distance and noise-free operation, we recommend the following: L Placing the unit away from electrical appliances such as a TV, personal computer or anoth...
Page 9 - Preparation; Connections; Base unit
Preparation 9 Connections Base unit Charger (KX-TG5822AL only) Note: L Base unit: Use only the included Panasonic AC adaptor PQLV1AL. L Charger: Use only the included Panasonic AC adaptor KX-TCA1AL. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm durin...
Page 10 - If you subscribe to an ADSL service; Battery installation
Preparation 10 If you subscribe to an ADSL service L Please attach a noise filter (contact your ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:– Noise is heard during conversations.– Caller ID features (page 24) do not function pr...
Page 11 - Battery charge; Charging; OR
Preparation 11 Battery charge Place the handset on the base unit or charger for 6 hours before initial use. L The unit will beep once, the CHARGE indicator will light, and “ Charging ” will be displayed. L “ Charge completed ” is displayed when the battery has been fully charged. The CHARGE indicato...
Page 12 - Battery performance; Battery replacement; Recharge battery
Preparation 12 Battery performance After your Panasonic battery is fully charged, you can expect approximately the following performance: *1 Handset is off the base unit or charger but not in use. Note: L Battery power is consumed whenever the handset is off the base unit or charger, even when the h...
Page 13 - Controls and display; Controls
Preparation 13 Controls and display Controls Base unit A { HANDSET LOCATOR 1 } B { HANDSET LOCATOR 2 } C { HANDSET LOCATOR } D Antenna E IN USE indicator F Charge contacts G CHARGE indicator KX-TG5821AL KX-TG5822AL A B C D E D F G TG5821_5822AL(e).book Page 13 Tuesday, March 15, 2005 8:05 PM
Page 15 - Display; Handset display items; Action; Conf
Preparation 15 Display Handset display items Soft keys The handset features 2 soft keys. By pressing a soft key, you can select the function displayed directly above it. L The functions displayed will vary depending on how you are using the unit. L When a function does not appear above a soft key, t...
Page 16 - Making/Answering Calls; Making calls; Talk; Recall Call
Making/Answering Calls 16 Making calls 1 Lift the handset and press {C} . L “ Talk ” will be displayed. 2 Dial the phone number. 3 When finished talking, press { OFF } or place the handset on the base unit or charger. Note: L “ Line in use ” is displayed when someone is talking on the other handset ...
Page 17 - Answering calls
Making/Answering Calls 17 To make a call using the redial list The last 5 phone numbers dialled are stored in the redial list. 1 Press { REDIAL } . L The last number dialled will be displayed. 2 Press {V} or {^} repeatedly to display the desired number. L To delete the displayed number, press { CLEA...
Page 18 - HOLD button; Hold; MUTE button
Making/Answering Calls 18 Useful features during a call HOLD button This feature allows you to put an outside call on hold. KX-TG5821AL: Press { HOLD } during an outside call. L “ Hold ” will be displayed. L To return to the call, press {C} or {s} . KX-TG5822AL: 1 Press { HOLD } during an outside ca...
Page 19 - Clarity booster; MENU; Recall button; Recall
Making/Answering Calls 19 Clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary. This feature will turn off when you hang up or put a call on hold...
Page 20 - Phonebook; Using the phonebook; Adding items to the phonebook
Phonebook 20 Using the phonebook The handset phonebook allows you to make calls without having to dial manually. You can add 50 names and phone numbers to the handset phonebook and search for phonebook entries by name. Adding items to the phonebook 1 Press { Phonebook } . 2 Press { Add } . L The dis...
Page 21 - LISA; Editing items in the phonebook
Phonebook 21 To edit/correct a mistake Press { < } or { > } to move the cursor to the character or number you wish to erase, then press { CLEAR } . Enter the appropriate character or number. Note: L Press and hold { CLEAR } to erase all characters or numbers. Calling someone in the phonebook P...
Page 22 - Chain dial feature
Phonebook 22 Chain dial feature This feature allows you to dial phone numbers from the phonebook while you are on a call.Example: Using a long distance calling card 1 Dial from the phonebook: 18000123456 (Calling card access number). 2 When prompted, dial from the phonebook: 1234 (Calling card PIN)....
Page 23 - Copying all items
Phonebook 23 Copying all items 1 Press { MENU } . 2 Scroll to “ Copy phonebook ” by pressing {V} or {^} , then press { > } . 3 Scroll to “ Copy all items ” by pressing {V} or {^} , then press { > } . L When all items have been copied, “ Complete ” will be displayed. L The destination handset d...
Page 24 - Caller ID Service; Using Caller ID service; Caller ID features; Out of area; Private caller; Ringer ID and light-up ID
Caller ID Service 24 Using Caller ID service This unit is Caller ID compatible. To use Caller ID features, you must subscribe to your telephone company’s Caller ID service. Caller ID features When an outside call is being received, the calling party’s phone number will be displayed.Phone numbers for...
Page 26 - Caller list; Missed calls
Caller ID Service 26 Caller list Caller information for the last 50 different callers will be logged in the caller list. You can use this list to return missed calls. L Caller information includes phone numbers, the date and time of calls, and the number of times the caller called. Missed calls If a...
Page 27 - Enter name; Erasing caller information
Caller ID Service 27 Editing a caller’s phone number before calling back You can edit a phone number in the caller list. 1 Press {V} or {^} to enter the caller list. 2 Press {V} or {^} repeatedly to display the desired item. 3 Press { Edit } . 4 Add or erase digits to the beginning of the number as ...
Page 28 - Intercom Features; Handset locator
Intercom Features 28 Handset locator You can locate a misplaced handset by paging it from the base unit. For KX-TG5821AL users 1 Base unit: Press { HANDSET LOCATOR } to page the handset. L The IN USE indicator will flash rapidly. L The handset will beep for 1minute. 2 Base unit: To stop paging, pres...
Page 29 - Conference
Intercom Features 29 Transferring a call (KX-TG5822AL only) Outside calls can be transferred from one handset to the other. 1 During an outside call, press { INTERCOM } . L The call will be put on hold. 2 To page the other handset, press { handset[1] } or { handset[2] } . 3 Wait for the paged party ...
Page 30 - Programmable Settings; Guide to handset programming
Programmable Settings 30 Guide to handset programming For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages. To programme, press { MENU } , press {V} or {^} to scroll through the menu, and press { > } or { Select ...
Page 31 - Ringer settings; Handset ringer volume; Handset ringer tone; High; Ringer setting; Back
Programmable Settings 31 Ringer settings Handset ringer volume 4 levels (high/medium/low/off) are available. The default setting is HIGH. 1 Press { MENU } . 2 Scroll to “ Ringer setting ” by pressing {V} or {^} , then press { > } . 3 Scroll to “ Ringer volume ” by pressing {V} or {^} , then press...
Page 32 - Call options; Auto talk
Programmable Settings 32 Handset interrupt tone (KX-TG5822AL only) This tone lets you know when you receive a call while you are on an intercom call (page 28).“ 2 ” (default): The tone will sound 2 times. “ On ”: The tone will sound for as long as the line rings.“ Off ”: Turns this feature off. 1 Pr...
Page 33 - Display options; Handset LCD contrast; Telephone settings; Recall time; Initial setting
Programmable Settings 33 Display options Handset LCD contrast You can adjust the handset display contrast. There are 6 levels. The default setting is level 3. 1 Press { MENU } . 2 Scroll to “ Initial setting ” by pressing {V} or {^} , then press { > } . 3 Scroll to “ LCD contrast ” by pressing {V...
Page 34 - Line mode
Programmable Settings 34 Line mode The line mode is preset to “ B ” and generally should not be adjusted. If “ Line in use ” on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to “ A ”. 1 Press { MENU } . 2 Scroll to “ Initial setting ” by pressing {V} or {...
Page 35 - Other options; Dial lock
Programmable Settings 35 Other options Dial lock This feature prohibits making outside calls. The default setting is OFF. Important: L When dial lock is turned on, only phone numbers stored in the phonebook as emergency numbers (numbers stored with a # at the beginning of the name) can be dialled us...
Page 36 - Re-registering the handset; No link to base. Move closer
Programmable Settings 36 Re-registering the handset If “ No link to base. Move closer to base, try again. ” is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit. Important: L Make sure the base unit is not being used. L Have the handset a...
Page 37 - Programming via direct commands; Direct commands chart
Programmable Settings 37 Programming via direct commands You can also programme most features using “direct commands”—special codes that take you directly to the feature you wish to programme and allow you to select the desired setting. There is no need to scroll through the unit’s menus.Details of ...
Page 38 - OFF
Programmable Settings 38 Note: L If you make a mistake or enter the wrong code, press { OFF } then start again by pressing { MENU } . TG5821_5822AL(e).book Page 38 Tuesday, March 15, 2005 8:05 PM
Page 39 - Useful Information; Belt clip; To attach the belt clip
Useful Information 39 Belt clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip ( 1 ), pull the right edge in the direction of the arrow ( 2 ). Headset (optional) Connecting an optional h...
Page 40 - Wall mounting
Useful Information 40 Wall mounting Base unit The base unit can be mounted on a wall. 1 Connect the AC adaptor. 2 Tuck the telephone line cord inside the wall mounting adaptor ( 1 ). Connect the telephone line cord ( 2 ). 3 Insert the hooks on the wall mounting adaptor into the holes ( A ) and ( B )...
Page 41 - Wall mount template for the base unit
Useful Information 41 Wall mount template for the base unit 83 mm 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Drive the screws (not included) into the wall using the wall mount template (see below). Connect the telephone line c...
Page 42 - To remove the wall mounting adaptor
Useful Information 42 To remove the wall mounting adaptor While pushing down the release levers ( 1 ), remove the adaptor ( 2 ). 2 TG5821_5822AL(e).book Page 42 Tuesday, March 15, 2005 8:05 PM
Page 43 - Wall mount template for the charger
Useful Information 43 Wall mount template for the charger 25.4 mm Charger (KX-TG5822AL only) The charger can be wall mounted, as shown below. 1 Connect the AC adaptor. 2 Drive the screws (not included) into the wall using the wall mount template (see below). 3 Mount the charger ( 1 ). 4 Slide it dow...
Page 44 - Error messages; Display message
Useful Information 44 Error messages If the unit detects a problem, one of the following messages will be displayed on the handset. *1 KX-TG5822AL only Display message Cause & solution Busy L The called handset is in use. *1 L The handset you tried to copy phonebook items to is in use. *1 L The ...
Page 45 - Troubleshooting; General use; Problem
Useful Information 45 Troubleshooting General use Programmable settings Problem Cause & solution The unit does not work. L Make sure that the battery is installed correctly (page 10). L Check the connections (page 9). L Fully charge the battery (page 11). L Clean the charge contacts and charge a...
Page 47 - Caller ID
Useful Information 47 Caller ID While storing an item in the phonebook, the handset starts to ring. L A call is being received. Answer the call and start again from the beginning after hanging up. Copying stopped with an item displayed. L The destination handset may have lost communication with the ...
Page 49 - Instructions to customer
Useful Information 49 Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.Conditions relating to connection and operation of this Permitte...
Page 50 - Service difficulties
Useful Information 50 If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telepho...
Page 51 - Technical information; Handset; Operating environment:
Useful Information 51 Technical information Base unit Operating environment: 5 °C – 40 °C Frequency: 5.76 GHz – 5.84 GHz Dimensions: Approx. height 95 mm x width 174 mm x depth 143 mm Mass (Weight): KX-TG5821AL:Approx. 260 g KX-TG5822AL:Approx. 270 g Power consumption: Standby: Approx. 2.4 WMaximum:...
