Panasonic KV-S1057C - Manual

Check the Accessories Check that all accessories are included before installing the unit. In the event that an item is missing, please contact your dealer. Accessories Name Notes USB cable — Software / Manual CD-ROM Drivers, Applications, Utilities, Documents Mixed batch card guide When the unit is ...

Main Unit Front 1 2 3 5 4 6 7 8 9 10 11 12 14 13 Document guidesMixed batch card guideManual feed selector Switches the scanning method between continuous scanning (Auto) and manual scanning (Manual). Operation panel For details, refer to "Operation Panel and LED Indicators" (page 14). Exit ...

Rear 1 2 3 4 5 Security slot Use a commercially available security cable. USB connectorUSB cable Connect the USB cable to the scanner and the other end of the USB cable to the computer. Power cordAC inlet Operating Manual 13 Location of Controls

Operation Panel and LED Indicators n KV-S1057C and KV-S1027C 1 2 3 4 5 6 7 8 n KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035 1 2 3 5 4 6 9 A LED ( Red ) Lights when an error occurs. B LED ( Green ) Shows the scanner’s status. C Power button Press the power button for more than one second ...

About LED The status of the scanner is displayed by the LED (Red) ( A ) and the LED (Green) ( B ), as shown in the table below: A LED ( Red ) B LED ( Green ) Status OFF OFF Power OFF *1 OFF ON Ready mode or Scanning OFF Blinking (Slow, Long ON) Sleep mode *2 Blinking (Slow) ON Warning ON OFF Error *...

Required Space Around the Scanner In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects, as shown in the following illustration. 272 mm(10.7 in.) 300 mm(11.8 in.) 500 mm(20 in.) 750 mm(30 in.) 238 mm(9.4 in.) 400 mm(16 in.) Notice • Do not mo...

Installing the Software Notice • Make sure to connect the unit to your computer after installing the software. Connecting the unit to yourcomputer and turning on the unit’s power before installing the software may influence the softwareinstallation. If you connect the unit to your computer and turn ...

Installing the Unit 1. Remove all packing tape and cushioning. 2. Pull out the feed extension tray in the direction of the arrow shown in the illustration below. 3. Set the exit tray. a. Raise the exit stopper. 20 Operating Manual Installation

Viewing Operating Manual and Help Installed If the manuals and software that were included on the Software / Manual CD-ROM have been installed on yourcomputer, you can use the following procedure to view the Operating Manual and the software’s help. To view the Operating Manual 1. Select [All Progra...

Preparing Documents Notice • Make sure to remove paper clips and staples from documents before scanning. Failing to do so candamage the unit, document, or both. • It is recommended to confirm that documents and cards are suitable for scanning (paper size,thickness, type, etc.) before scanning them. ...

Compatible Card Types The compatible card types for this unit are as follows. ISO format card: Size: 85.6 ´ 54 mm (3.4 ´ 2.1 in.) Thickness: 0.76 mm (0.03 in.) • Embossed cards are also compatible. When scanning embossed cards, it is recommended to place themin landscape orientation with the side to...

Compatible Bound Documents (Manual Scanning Only) Bound documents can be scanned by setting the manual feed selector to manual scanning (Manual). You canuse an optional carrier sheet (KV-SS076) to scan passports using manual scanning. Passport size: The passport sizes compatible with this unit are a...

Incompatible Documents The following types of documents may not scan properly: • Torn or frayed documents • Curled, wrinkled or folded documents • Carbon paper • Perforated or punched paper • Non-rectangular or irregularly shaped paper • Coated paper • Bound or glued documents • Chemical paper such ...

Notes about Documents for Scanning • Depending on the paper type, scanning results may be poor when you scan incompatible documents, oreven documents that should be compatible.If scanned images are skewed, paper jams occur, or double feeding occurs, try scanning again after doingthe following: – Cle...

Switching the Background Color of Scanned Images Using the software, you can switch the background color of scanned images between white and black.For details, refer to the Image Capture Plus, TWAIN, or ISIS help. Operating Manual 31 Operation

Mixed Batch Card Guide No adjustment to the document guide is required when using the mixed batch card guide. The mixed batchcard guide prevents a card from skewing when scanning paper documents and a card simultaneously. Installing the mixed batch card guide The mixed batch card guide is stored ins...

Removing the mixed batch card guide Remove the mixed batch card guide as shown in the following illustration. 1. Remove the mixed batch card guide ( A ) from the unit. 1 2. Remove the feed tray ( A ) from the unit. • Remove the left side of the feed tray ( B ) first as shown in the illustration. 1 2...

Using the Mixed Batch Card Guide Set paper documents on the feed tray, and a card on the mixed batch card guide respectively. • The card set on the mixed batch card guide is fed after completing the paper document scanning. • The mixed batch card guide is suitable for the following card type. ISO fo...

Scanning Documents 1. Adjust the document guides ( A ) slightly larger than the actual size of the documents. 1 38 Operating Manual Operation

Performing a push scan The following push scan functions are available for each scanner as shown below: KV-S1057CKV-S1027C KV-SL1066KV-SL1056KV-SL1055KV-SL1036KV-SL1035 Touch Free Scanning Yes Yes Push scan using the LCD Yes No Push scan using the 7-segment LED No Yes Touch Free Scanning Setting the...

Push scan using the LCD If you are using a KV-S1057C or KV-S1027C with Image Capture Plus, you can perform a push scan usingthe LCD. Registered jobs are displayed on the LCD. Use the cursor button ( A ) to select a job. Note • Register jobs in advance. For details about registering jobs, refer to th...

Push scan using the 7-segment LED If you are using a KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 or KV-SL1035 with Image Capture Plus,you can perform a push scan using the 7-segment LED. A registered job number is displayed on the 7-segmentLED. Use the cursor button ( A ) to select a job number. Note...

Checking events Check the following if an application does not start up after being set. 1. Display the Scan properties screen. • If you are using Windows 8 / Windows 7:[Control Panel] ® [View devices and printers], right-click the scanner icon, and display the [Scan properties] screen. • If you are...

Using Control Sheets Placing a control sheet in the middle of documents lets you change the scanning conditions for pages scannedafter the control sheet. Also, you can change the folder used to save the scan data of documents scannedafter the control sheet. • Print out control sheets from the includ...

About Printing Control Sheets • Print the control sheet at the specified size; do not enlarge or reduce the size. • When printing the control sheet, make sure that the pattern is 25 mm (1 in.) from the top of the page andcentered horizontally. Center of the page <Example A4 printout> 25 mm (1 ...

Cleaning the Outside of the Scanner Notice • Before moving the unit, be sure to unplug the power cord and USB cable. • Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may causedeformation, discoloration or damage.) • Clean the scanner at least once a month. 1. C...

Cleaning the Inside of the Scanner Note • Clean the inside of the scanner when approximately 6,000 sheets have been scanned. The time forcleaning may differ depending on documents you scan. To maintain proper scanning, clean the scannerparts frequently. • Clean the rollers if paper jamming or double...

Cleaning the Conveyor and Scanning Glasses 1. With a soft and dry cloth, wipe off any dirt on the conveyor ( A ) and scanning glasses ( B ). 1 2 Operating Manual 53 Care and Maintenance

Cleaning the Double Feed Detectors and Starting Sensors 1. Remove dust from the double feed detectors ( A ) and starting sensors ( B ) with a cotton swab. 2 1 1 2 54 Operating Manual Care and Maintenance

Cleaning the Rollers Use the roller cleaning paper (KV-SS03) (page 10) to wipe dirt off from the surfaces of all rollers. Notice • Be careful not to damage any parts of the unit. 1. Open the double feed prevention roller cover ( A ). 1 2. Remove the double feed prevention roller. • While pushing the...

Replacing the Rollers As a rough guideline, we recommend to replace the paper feed roller and double feed prevention roller moduleafter scanning 250,000 sheets of paper. ("250,000 sheets" is based on scanning high-quality woodfree paper.Depending on the type of paper and other factors, the a...

Troubleshooting If a problem occurs while the scanner is being used, check the following items and check the scanner statusin User Utility. If the unit still malfunctions, turn it OFF, unplug the power cord and call for service. Symptom Possible Cause Remedy The LED (Green) does notlight when the un...

Uninstalling the Software If you want to remove the software that is installed on your computer, follow the procedure below to uninstallthem. 1. In [Control Panel], open [Uninstall a program]. • In Windows XP, select [Add or Remove Programs]. 2. Uninstall the following software programs. Program Nam...

Repacking Instructions It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or ship the scanner, please follow these instructions. Note • Improper repacking of the scanner may result in a service charge to repair the scanner. • Please use the...

Specifications Scanning Item KV-S1057C KV-SL1066 KV-S1027C KV-SL1056 KV-SL1055 KV-SL1036 KV-SL1035 Scanning face Duplex Scanning method Color CIS (600 dpi) Scanning size 216 mm (8.5 in.) Scanningspeed *1 A4 / LetterSimplexBinary / color(200 dpi, 300 dpi) 65pages/min. 45pages/min. 40pages/min. 35page...

Index Numerics 7-segment LED 2, 15, 44 A AC inlet 13Accessories 11ADF door 12ADF door release 12 B Background color switch function 2, 3, 31 C Cleaning Mode 59Control sheet 5, 46Conveyor 53Cursor button 14, 43 D Document guides 12Double feed detection 30Double feed detection function 2, 3Double feed...