Panasonic GP-US932CU, GP-US932CUE, GP-US932CUS, GP-US932CUSE - Manual

6 Precautions Do not attempt to disassemble this product. To prevent electric shock, do not remove screws or covers.There are no user-serviceable parts inside.Ask a qualified service person for servicing. Handle this product with care. Do not abuse the product. Avoid striking, shaking, etc. Theprodu...

8 Preface This system is a compact and light type HD camera control unit (hereafter called CCU) with high image quality and multiplefunctions by introducing digital signal processing. The camera head is separately mounted. • GP-US932CU, GP-US932CUE, CCU for 3CCD color camera (HDMI output connector e...

9 Major Operating Controls and Their Functions ■ Camera head q Lens mount section C-mount lens is mounted on this section. ( ☞ page 14) w Camera cable connector This connector is used to connect the camera cable(option).<Camera cable> (option) GP-CA932/4, GP-CA932/4E (4 m {13.1 ft.})GP-CA932/6...

The following shows how to mount the camera on the tripod (locally procured).The tripod socket can be mounted on either top or bottom of the camera head. <Sample of camera mounting on tripod> <Change of tripod socket position> 13 Tripod socket Camera mounting base(locally procured) Attac...

x Turn a C-mount lens clockwise to engage the lens withthe lens mount section. ■ How to mount lens Important: • Be sure to turn off the power of the CCU before mounting a lens.• A lens whose projection length of the lens mount section is 4 mm or less shall be used. • The recommended lens aperture ra...

Setup items Description Page q CAMERA ID Specifies the camera title. Through this item, a camera title is createdwith alphanumeric and symbol characters, and displayed on thescreen. w ELC Specifies the ELC function. e SHUTTER Specifies the electronic shutter speed. r GAIN Adjusts the gain. t SENS UP...

v To return to the camera image screen after storing thesettings, move the cursor to "END" and press the [SEL]button.The settings can be stored even if the power of theCCU is turned off. ■ Basic operations The description below explains how to operate the SETUPmenu basically.First of all, th...

MANU: The detection area can be manually specified. ( ☞ page 18) AUTO: The dark areas are automatically covered and only the bright areas are automatically detected. c Move the cursor to "PEAK/AVE" and use the [ e ] and [ f ] buttons to adjust the detection level. When the cursor is moved to...

19 3. Electronic shutter setting [SHUTTER] The electronic shutter speed is specified. The speed isselectable from the following. OFF (default),1/100 (1/120*), 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000, and MANU Select "MANU", and press [SEL] button. The "SHUTTER"screen appears to ...

24 10. Synchronization setting [SYNC] The synchronization state is displayed. The horizontalphase in the external synchronization can also be adjusted.The internal synchronization is indicated as "INT", and theexternal synchronization is indicated as "EXT". The horizontal phase in th...

The SEL menu is a simplified menu that can be called upby pressing the [SEL] button while an image is displayed.The following items can be set with use of the SEL menu. • Image level [BRIGHTNESS]: Adjusts the brightness (ELC, gain (AUTO), and the convergence level of elec-tronic sensitivity enhancem...

• Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camerahead? Check whether the connection is appropriately established. 9 • Pressing once displays the state. Press the [GAIN] button repeatedly until your target LED lights. 9 26 • Are the cables ...

28 ● GP-US932CU/GP-US932CUS Power source: 12 V DC Power consumption: 15 W (excluding camera head) Pick-up system: Micro prism system Image sensor: 1/3" 3CCD, interline transfer (IT) equipped (progressive scanning supported) Synchronization: Internal or external synchronization Video output: Vide...