Page 2 - Table of Contents
Table of Contents Important Information ............................................................................................................................ Important Safety Precautions .............................................................................................................
Page 3 - Important Information; FCC STATEMENT; FCC Notice
Important Information 1 WARNING: TO REDUCE THE RISK OF OR ELECTRIC SHOCK, DO NOT EXPOSE THISAPPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, withinan equilateral triangle is intended to alert the userto the presence of insinuated dangerous voltagewithin the product's enclosu...
Page 4 - Important Safety Precautions
Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperlyhandled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CANRESULT IN POTENTIAL ELECTRI...
Page 5 - Entering of objects and liquids; equipment as this can result in a risk of fire or electric shock.; Replacement parts
Important Safety Precautions (continued) 3 13. Carefully move ---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and unevenfloor surfaces can cause the product to fall from the trolley. 15. Servicing ---Refer al...
Page 6 - EXAMPLE OF ANTENNA GROUNDING AS PER
Important Safety Precautions (continued) 4 22. Power source ---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For addedprotection for th...
Page 7 - Preparations; Using the Remote Control; with different model.; Cautions regarding use of remote control; Open the battery cover.; Precautions on battery use
Preparations 5 2 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set.Objects between the remote control and sensor window may prevent proper operation. Note: the illustration is for your reference only, the remote sensor may locate differently w...
Page 8 - Antenna Connection
Preparations (continued) 6 INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on thepicture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and w...
Page 9 - Identification of Controls; Functions of; Main Unit
Identification of Controls 7 Speaker Speaker Remote Sensor Power Indicator 1. SOURCE To select the input signal source. 2. MENU Press this button to access the MENU main page. 3. CH+/- Press these two buttons to directly change the TV channel; In OSD MENU, press these buttons to choose the OSD items...
Page 10 - Connect to the VCR input jacks to record programs.
Identification of Controls (continued) 8 1. AV outputs Connect to the VCR input jacks to record programs. 2. D-Sub input /Audio Line in Connect to the D-Sub/audio output jacks on your PC. 3. Component inputs Connect to the audio and component output jacks of a DVD player or Set-Top Box. 4. Earphone ...
Page 11 - ENTER; Remote Control
Identification of Controls (continued) 9 To adjust backlight This button can not work To adjust menu transparency To access the MENU main page or exit menu operation To select input signal source Picture mode select [0-9] number buttons: Direct channel select Turn the unit on or off Sound mute ENTER...
Page 12 - Connections; Rear of the VCR; For better video, you can use the S-video jack source supports it.; To play VCR; button repeatedly to select; Cautions before connecting; VCR; Connect a VCR
Connections 10 Rear of the VCR How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. Note: For better video, you can use the S-video jack source supports it. The unit automatically identifies S-Video if you are using S-Video jack. We recommend you to...
Page 13 - To playback Camcorder; Connect a Camcorder
Connections (continued) 11 How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your LCD TV, press SOURCE button repeatedly to select Video . 2. Turn on your camcorder and set it to output mode. (For details, r...
Page 14 - Rear of the DVD player; How to connect a DVD Player using Component Video Connections:; Green; Connect a DVD player
Connections (continued) 12 Rear of the DVD player How to connect a DVD Player using Component Video Connections: Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr (or Y, Cb, Cr) output jacks on the DVD player. Connect the Audio cable between the AUDIO input jack on ...
Page 15 - To Watch the PC screen; VCR for recording; To record program; PC; Connect a PC
Connections (continued) 13 How to connect: Connect a D-Sub cable between the D-Sub jack on the PC and the D-Sub input jack on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit. To Watch the PC screen 1. Turn on your LCD TV, press SOURCE button repea...
Page 16 - Turning the Unit On and Off; Power; Viewing the MENUs and Displays
Turning the Unit On and Off 14 Turning the Unit On and Off Turning On Insert the power cord into the wall outlet.Press the Power Switch on the unit. Press the Power button on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, pres...
Page 17 - Memorising the Channels; Before you start Auto Search, please refer to the part of [; Manual Search; Storing Channels in Memory Automatically; Manual Fine Tuning; Storing Channels in Memory Automatically
Memorising the Channels 15 Your LCD TV can memorise and store all the available channels for both antenna and cable channels. After theavailable channels are memorised, use CH+/- to scan the channels. Storing Channels in Memory Automatically Press MENU to display the menu main page. Press CH+/- repe...
Page 18 - Adding and Erasing Channels; Setting Colour and Sound System; Editing Channels
Memorising the Channels (continued) 16 Adding and Erasing Channels Use number buttons to directly select a channel that will be added or erased. Repeat steps 1~3 in [ Storing Channels in Memory Automatically ] to access the Channel menu page. Press CH+/- repeatedly to select Skip item. Press ENTER o...
Page 19 - Basic Operations; Changing Channels; Selecting a MENU Language
Basic Operations 17 Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH- , the unit changes channels in sequence. You will see all the channels that the unit has memorised.You will not see channels that were erased. Direct Ac...
Page 20 - Setting Picture; Using the Preset Picture Mode
Setting Picture 18 Using the Preset Picture Mode Press MENU to display the menu main page. The picture page will be displayed automatically. Press ENTER or VOL+/- to access the Picture submenu. The Picture Mode item is highlighted automatically. Press ENTER or VOL+/- to select a desired picture mode...
Page 21 - Adjusting Image in D-Sub mode; You may use the; Adjusting Clock and Phase; Adjusting the Picture Automatically; Adjusting the Image Position; Adjusting the Picture Automatically
Adjusting Image in D-Sub mode 19 With working in D-Sub mode, this unit allows you to perform several adjustments for image Adjusting the Picture Automatically Press MENU to display the menu main page. Press CH+/- repeatedly to select Image page. Press ENTER or VOL+/- to access the Image page. The Au...
Page 22 - Setting Sound; Customising the Sound; Customising the Sound]
Setting Sound 20 Customising the Sound Press MENU to display the menu main page. Press CH+/- repeatedly to select Audio page. Press ENTER or VOL+/- to access the submenu. Press CH+/- to select Bass , Treble or Balance item. Press VOL+/- to adjust the value of the item. Using the Preset Sound Mode Us...
Page 23 - Other Functions; Adjusting Back Light; [Adjusting Menu Transparency; Setting DCDi Function; Adjusting Menu Transparency; Loading Default Values; Adjusting Menu Transparency]; Setting Sleep Timer
Other Functions 21 120min. Adjusting Menu Transparency Press MENU to display the menu main page. Press CH+/- repeatedly to select Display page. Press ENTER or VOL+/- to access the submenu. Press CH+/- to select Transparency item. Press VOL+/- to adjust transparency. Note: You may use the TRANSPARENC...
Page 24 - Troubleshooting; Symptoms; Never attempt to repair a defective TV yourself.
Troubleshooting 22 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket.Unplug the power cord, wait for 60 seconds. The...
Page 25 - Care and Maintenance; LCD Display panel information; B. Do not display the fixed image for extended periods of time.; Cleaning and Maintenance; Use eyeglass cleaner to remove stubborn dirt from the LCD.
Care and Maintenance 23 LCD Display panel information Note: The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time. Impo...
Page 26 - Specifications; Design and specification are subject to change without notice.
Specifications 24 Power supply: Power Consumption: Screen: Dimensions: Weight: TV system & channel coverage: System PAL-B/G TV system: Speaker: Accessories AC 100-240V 50/60Hz 48W (Max.) 38cm 470 (W) x 171 (D) x 324 (H) (mm) 4kg VHF 2-12 UHF 21-69 CATV X~Z+2, S1~S41 PAL BG, NTSC (AV) 3W, 8 x 2 O...
Page 27 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L15Y33-03 V1.0
