Palsonic VCR9688 - Manuals

NOTICE: Unauthorized recording of copyrighted televisionprogrammes, films, video tapes and other materi-als may infringe on the rights of copyright ownersand be contrary to copyright laws. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DONOT EXPOSE THIS EQUIPMENT TO RAIN ORMOISTURE. CAUTION: TO REDUCE TH...

INTRODUCTION........................................... E-4 RemoteControl Operation....................... E-4 Video Cassette Tape............................... E-4 INSTALLATION............................................. E-5 Equipment Connection............................ E-5 TV Antenna............

. Remote Control Operation This VCR can be operated with the remote control from up to a distance of about 23 feet (7 meters) and within anangle of 15 degrees either side of center.There must be no obstacles between the remote control unit and the remote sensor of the VCR. Battery Installation Remov...

Equipment Connection TV Antenna To watch a picture from the VCR using this connection,it is necessary to set one of the TV channels as the"Video channel". See Preparations in Video ChannelSetting (on Page 6). 1. Connect the antenna (or CATV) connector to the ANT. IN socket. 2. Connect the ac...

Language Clock AMS Video Channel Setting Initial Settings This setting is necessary for RF connections (when theSCART cable is not used to connect this unit and theTV). This setting is not necessary for AV connectionsusing the SCART cable. Start from the initial Settings inthe next section. When the...

1. Set the On-screen Language 1. 2. 1. 2. 3. Initial Setting Up Select the language you want by using thebuttons to display it inverted. When you press the MENU button, that language isset and the CLOCK SET screen appearsautomatically. Changing the Language after the InitialSettings Press the MENU b...

Select the item you want by using the buttons,then press the SHIFT> button. Set the data you wantby using the buttons. Menu Screen/Mode Screen Using the Menu Screen When you press the MENU button, the menu screen iscalled up. When you press the MENU button again, theunit returns to the normal scr...

CHANNEL PRESET There are two ways to preset channels: Automatictuning with AMS and manual tuning. AMS Operation Automatic tuning with AMS is executed during the initialsettings, so normally it is not necessary. AMS is neces-sary at such times as when you take the unit to anotherregion. See Initial S...

To make the initial setting for G-Code programming, prepare the list below.For all TV stations you have stored on the VCR following the procedure by AMS/Manual tuning, fill in the blanks withthe position number you used, and the corresponding TV stations.For G-Code programming procedure, see page 19...

Tuning with the Buttons 1. 2. Press the OPERATE/TIMER button to turn on theVCR. Press the buttons to select the positionnumber to which the desired channel has beenpreset. P10 Notes Notes Tuning with the Number Buttons(Remote Control Only) For channels preset in single-digit positionPress the 0 butt...

Basic Operation 1. 2. 3. 4. Press the OPERATE/TIMER button. Insert a cassette tape into the CASSETTELOADING SLOT. Turn on the TV and select the channel for videoviewing. Press the PLAY button to start playback. To stop playback: Press the STOP/EJECT button. To rewind a tape in Stop mode: Press the R...

Search The Picture Search function is a convenient way tolocate a desired portion of the tape quickly. Forward Search: To view high-speed pictures in the forward direction 1. In the Playback mode, press the FF button. 2. Press the FF button again to search faster. 3. To resume normal playback, press...

Basic Operation Auto Turn on System 1. 2. 3. 4. 5. Press the OPERATE/TIMER button. Press the buttons to select a desiredchannel to be recorded. Insert a cassette tape with a safety tab. Press the REC button to start recording. To finish recording, press the STOP/EJECTbutton. Checking the Picture Bei...

One-touch Timer Recording(OTR) This allows you record for up to 5 hours with automaticturn-off. 1. 2. Press the REC button during recording.The VCR enters OTR mode. Select the recording duration by pressing the RECbutton repeatedly. The OTR indication appears onthe TV screen.The OTR recording will s...

A maximum of 8 events can be programmed within aperiod of one month including the present day fortimer recording.A timer recording can be activated at the same timeon the same day every week, on every day or onweekdays, as well as on a particular day. Program example Current time and date August 20,...

Hints on Programming In Step 4, you can select various "EV" (every week) recording of the same channel at the same time modes as well as recording on a particular day. Press the V button when the current day on the calendar blinks or press the button, exceeding the last day of the calendar (...

Note G-Code program can record a program by using the G-Code numbers (up to 9 digits) in newspaper and maga-zine TV listings to set the VCR. G-Code is a trademark applied for by Gemstar Devel-opment Corp. G-Code system is manufactured under license from Gemstar Development Corporation. Before Progra...

Use the screen below to check the settings. If this isthe first time G-Code has been used for a channel,use the buttons to enter the position number.Refer to the table on page 10 for details. This settingis only required the first time.The POS settings can be changed. Use the < SHIFT> buttons ...

Check the following list of problems and remedies before calling service personnel. The problem may be one you cansolve yourself. SYMPTOM CAUSE REMEDY No power supply to the VCR. AC Mains Cord is not connected. Connect the AC Mains cord to the ACoutlet. Power is on but the VCR doesoperate. Dew conde...

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888