Page 2 - Contents; Congratulations on your purchase of this
Contents Congratulations on your purchase of this Palsonic LCD TV/MONITOR. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV/MONITOR. Retain this manual in an easily accessible location for future reference. Note: Scr...
Page 3 - Features
1 Features Features TV/Monitor High brightness/High contrast LCD Resolution: 640 x 480 @ 60Hz Brightness: 450 cd/m 2 Contrast Ratio: 350:1 Multi digital processing & Picture improvement circuit English/Chinese on-screen menu display Sleep Timer Backlight Adjustment Channel Edit Low power consump...
Page 4 - Cautions for safety; The vents and other openings in the cabinet are designed
Cautions for safety Cautions for safety 2 1. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents andopenings since insufficient ventilation can causeoverheating and/or shorten the life of the product. 2. Do not place the product on a bed, sofa,...
Page 7 - Identification of controls; Front
Identification of controls Front/Back 5 Front 1 3 2 4 5 1. To input signal select2. To access menu3. CH+/-: to select a higher/lower numbered channel or cycle through the menus.4. VOL+/-: press to raise/lower the volume or adjust the selected item.5. Power on/standby6. Indicator: standby mode: red p...
Page 8 - Back
AUDIO IN PHONE SPEAK OUT TUNER POWER IN 6 Back S-VIDEO input Earphone jack VGA input PC audio line in Speaker output Video/audio input Antenna input AC Power input
Page 9 - Remote control
Remote control Remote control 7 To select different picture modes Channel up/down selector. Inmenu operations, used to selectitem upwards or downwards. On-screen display To enter into menu Previous channel In PC mode, auto correct picture Muting Sound Clock/Timer setting Power on/standby Channel sel...
Page 10 - Please install the batteries before using the remote control.; Open the battery cover.
Notes: Effective remote range Battery Installation 8 Please install the batteries before using the remote control. 1. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. 2. Do not drop, dampen the remote control. 3. Do not disa...
Page 11 - Installation; Antenna connection/Power connection/Elevation adjustment; Antenna connection
Installation Antenna connection/Power connection/Elevation adjustment Antenna connection 9 Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Turn off the pow...
Page 12 - To the wall outlet; You can adjust the angle of the LCD TV as follows.; Power cord
Notes: Elevation adjustment Power Connection 10 To the wall outlet 1. This TV can only be operated on a power of AC 240V 50 Hz.2. Please remove the power plug from the wall outlet when the TV will not be used for a long period of time. You can adjust the angle of the LCD TV as follows. The elevation...
Page 13 - Connecting video/audio equipment; S-VIDEO Signal Connection; Back panel
Installation (continued) Connecting video/audio equipment Connecting video/audio equipment 11 Composite VIDEO Signal Connection (RCA) Connect the composite signal terminal on the TV to the output of AV equipment through compositecable as illustrated.If you select the video signal, please set the inp...
Page 14 - Connecting the PC input terminals; Equipment with
Notes: 12 1. Carefully check the terminals for position and type before making any connections.2. Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.3. When connecting an external device, turn off the power of the main un...
Page 15 - Selecting input source; Basic operations; Turning On/Turning Off/Selecting input signal/Menu introduction; Turning On; POWER; Turning Off
Note: Selecting input source Note: Basic operations Turning On/Turning Off/Selecting input signal/Menu introduction Turning On 13 CH- VOL- CH+ VOL+ MENU CH+ VOL- MENU VOL+ CH- Insert the power plug to wall outlet, then the red indicator lightsup and the unit is in STANDBY mode. Press the POWER butto...
Page 16 - Menu introduction; In TV mode, there are three menu pages. In MENU operations, the; MENU; button repeatedly or waiting for 5 seconds can
To adjust picture's colour saturation. To adjust sound system.(In AV or S-Video mode, the item is grey and you can not select it). Press MENU button To adjust the BassTo adjust the Treble Note: In AV or S-Video mode, the menu is not accessible. Menu introduction 14 In TV mode, there are three menu p...
Page 17 - Operations in TV mode; Channel preset; Auto search
Channel searching ...VHFH 0 Operations in TV mode Channel preset Auto search/Channel search/Fine tuning/Skip setting Auto search 15 Press MENU button third times to access menu (Refer to Menu introduction on page 14). Press CH+/- to select Auto search item. Press VOL+/- buttons to start Auto search ...
Page 18 - Fine tuning; Skip setting
4 6 5 3 2 1 7 8 9 0 Skip Set VHFH 4 Save Fine tuning 16 CH+ VOL- MENU VOL+ CH- To conduct the following operation, you must select TV input signal(Refer to Selecting input signal on page 13). Press DIGIT buttons or CH+/- buttons to select the desiredchannel. Press MENU button third times to access m...
Page 19 - Channel edit; Channel Edit
Operations in TV mode (continued) Channel preset Channel edit Channel Edit 17 CH+ VOL- MENU VOL+ CH- After Auto Channel Preset, this function is for you to edit theorder of programs conveniently according to your favourite. Use DIGIT buttons or CH+/- buttons to select currentchannel number. Press ME...
Page 20 - Channel Select; Using DIGIT buttons
Channel Select Using DIGIT buttons/Using CH+/- buttons/Using previous channel button Using DIGIT buttons 18 CH+ CH- To select one-digit channel number:Press 0-9 digit buttons to select the desired channel. Two seconds later, the channel is selected. To select two-digit channel number:Press -/-- butt...
Page 21 - Picture adjustment; The item; Colour Hue
Function To adjust picture's brightness To adjust picture's contrast To adjust picture's colour saturation To adjust picture's sharpness To adjust picture's colour hue To adjust the backlight Item Bright Contrast Saturation Sharpness Colour Hue Backlight Operations in TV mode (continued) Picture adj...
Page 22 - Sound adjustment; Adjusting sound/Adjusting volume/Muting the sound; Adjusting sound
Muting the sound Adjusting volume Sound adjustment Adjusting sound/Adjusting volume/Muting the sound Adjusting sound 20 CH+ VOL- MENU VOL+ CH- Press MENU button twice to access the menu (refer to Menu introduction on page 14). Press CH+/- to select Sound Set item. Press VOL+/- to access the sub-menu...
Page 23 - System Setting; Blue screen
Colour system ODS language Operations in TV mode (continued) System Setting Blue screen/OSD Language/Colour system/Sound system Blue screen 21 CH+ VOL- MENU VOL+ CH- Press MENU button twice to access the menu (refer to Menu introduction on page 14). Press CH+/- to select Blue Background item. Press ...
Page 24 - Sound system
Sound system 22 CH+ VOL- MENU VOL+ CH- Press MENU button twice to access the menu (refer to Menu introduction on page 14). Press CH+/- to select Sound sys item. Press VOL+/- to select correct sound system according to yourarea. Some models are with only onesound system and in this case theSound Syst...
Page 25 - Timer setting; Using SLP button/Using CLOCK button; Using SLP button; Using CLOCK button
Turn off 0:00 Status: Everyday Operations in TV mode (continued) Timer setting Using SLP button/Using CLOCK button Using SLP button 23 CH+ VOL- SLP VOL+ CH- Press SLP button to display Sleep menu. Press SLP button repeatedly to set sleep timebetween: 0, 10, 20, 30, 60, 90, 120,180, 240 minutes. If y...
Page 26 - Selecting input signal
Operations in AV/S-VIDEO mode Operations in AV/S-VIDEO mode 24 CH+ VOL- MENU VOL+ CH- You can connect the set to video tape recorder, VCD, DVD, orother equipment with AV, S-VIDEO output to watch the programfrom them (refer to Connecting video/audio equipment) . Firstly, the TV set-must be in AV/S-VI...
Page 27 - PC signal input; Operations in PC mode; Accessing PC mode; Auto adjusting
PC signal input Operations in PC mode Accessing PC mode/PC signal format/Auto adjusting/Picture adjustment Accessing PC mode 25 Press SOURCE button on the unit or on the remote controlrepeatedly until the screen displays PC , which indicates that the set is in PC mode (refer to page 13).If you conne...
Page 29 - Troubleshooting
Troubleshooting Troubleshooting 27 Before calling service personnel, please check the following chart for a possible cause to the troubleyou are experiencing. Power is not turned on Poor colour, poor tint Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Spots a...
Page 30 - Specifications; TV system & channel range
Specifications Specifications TV system & channel range Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: ~240V, 50Hz 65W 730 x 290 x 560 15 51cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41 Colour System: Sound output: Accessories: PAL, NTSC (AV) 2W x 2 Owner's manual x...
Page 31 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L22A13-00
