Page 2 - Contents; Congratulations on your purchase of this Palsonic Product.
Contents Safety Instructions ...................................................................General safety precautions ..................................................... Parts Description Front Panel ..........................................................................Rear Panel ...........
Page 3 - Locate your LCD monitor near an easily accessible AC outlet.; Safety Instructions; CAUTION; RISK OF ELECTRICAL SHOCK
Before connecting the AC power cord to the DC adapter outlet, make sure the voltagedesignation of the DC adapter corresponds to the local electrical supply.Never insert anything metallic into the cabinet openings of the Liquid Crystal Display(LCD) monitor: doing so may create the danger of electric ...
Page 4 - General safety precautions
General safety precautions This Monitor has been engineered and manufactured to assure your safety.You can prevent serious electrical shock and other hazards by keeping in mind thefollowing: Do not place anything heavy, wet or magnetic on the monitoror the power cord. Never cover the ventilation ope...
Page 5 - Parts Description; Front Panel; select input signal or select submenu of the on-screen menus.; Accessories
DC powerSupply/Adapter Parts Description Front Panel 1. SPEAKER 2. POWER switches the set off (stand-by mode) and on. 3. MENU display the main on-screen menu. Exit from sub-menu. 4. SELECT select input signal or select submenu of the on-screen menus. 5. Volume UP, Volume DOWN adjust the volume. Also...
Page 6 - Rear Panel; COMPONENT VIDEO INPUT
Parts Description Rear Panel 1. VIDEO OUTPUT2. AUDIO OUTPUT connects to the audio input port of an additional device. 3. COMPONENT VIDEO INPUT Y, Cb, Cr (480i) video signals from DVD. 4. VIDEO 2 INPUT video signal from VCR or similar devices. 5. AUDIO 2 INPUT audio signals from VCR or similar device...
Page 7 - Remote Control Unit
Page 8 - Inserting the Batteries in the Remote Controller
3 1 Inserting the Batteries in the Remote Controller You must insert or replace the batteries in the remote controller when you: Purchase the set.Find that the remote controller is no longer operating correctly. Remove the cover of the remote controllerby pressing the symbol and pullingthe cover spa...
Page 9 - Menu Tree; Main Menu
Menu Tree 9 (TV/VIDEO mode) (PC mode) (TV/VIDEO mode) (TV/VIDEO mode, NTSC System) (PAL System) (NTSC System) FUNCTION TRACKING INFORMATION TUNING LANGUAGE SPORT AUTO TUNING MANUAL TUNING FINE TUNING CH SKIP (Not available) (Not available) (PAL System) (TV mode, PAL System) FUNCTION TRACKING INFORMA...
Page 10 - Connecting a PC
Connecting a PC Turn off your computer and monitor. Connect a PC D-Sub cable between your PC andPC-VIDEO-IN of the monitor. And then fasten thescrews of both sides of the cable. Connect a PC Audio Cable between the SoundOutput jack of the sound card on a PC and thePC-AUDIO-IN of the monitor. Connect...
Page 11 - Viewing a PC screen; Initial set PC mode
Viewing a PC screen Initial set PC mode When the picture is unstable Power on your monitor by pressing the POWER button on the main set or on the remote controller. Use the PC button on the remote controller to switch to the PC mode. Then the PC screen is automatically set.When a CD-Title runs, the ...
Page 12 - Adjusting the Picture Settings
Adjusting the Picture Settings Viewing a PC screen Your monitor has several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, COLOUR TEMPERATURE Press the MENU button. Result : The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following options: CO...
Page 13 - Adjusting the Sound Settings
Viewing a PC screen Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL or VOL buttons to move the SOUND menu. Use the CH or CH buttons to select one ...
Page 14 - Adjusting the Geometry Settings
Viewing a PC screen Adjusting the Geometry Settings The geometry settings can be adjusted to centre your viewing screen. Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL , VOL buttons to move the GEOMETRY menu. Use the CH or CH buttons to select one of the following options:...
Page 15 - PC Stable Adjustment
Viewing a PC screen PC Stable Adjustment When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase,set the PC in the following sequence: Press the MENU button. Result : The PICTURE menu is displayed. Use the VOL , VOL buttons to move the FUNCTION menu. Us...
Page 16 - Connecting to watch TV or VCR; Connecting the Aerial or Cable Television Network; Cable Television Network; Connecting the VCR, DVD or Other External Devices; AIR
Connecting to watch TV or VCR Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must bereceived by the set from one of following sources:An outdoor aerialAn indoor aerial (not recommendable)A cable television network 1. In the first three cases, connec...
Page 17 - Viewing a TV/VCR screen; Adjusting the Picture Settings 1
Viewing a TV/VCR screen Adjusting the Picture Settings 1 Your TV have several settings which allow you to controlpicture quality: CONTRAST, BRIGHTNESS, SHARPNESS, COLOUR, TINT Press the MENU button. Result: The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following option...
Page 18 - Adjusting the Picture Settings 2
Adjusting the Picture Settings 2 By pressing the P.STD button on the remote control, you can sequentially select any one ofthe four possible preferred analogue picture presets.Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD STRONG MOVIE SOFT CUSTOM Select this m...
Page 19 - Adjusting the Sound Settings 1
Viewing a TV/VCR screen Adjusting the Sound Settings 1 The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE / MTS Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL , VOL buttons to move the SOUND menu. Use the CH or CH buttons to ...
Page 20 - Adjusting the Sound Settings 2
Adjusting the Sound Settings 2 By pressing the S.STD button on the remote control, You may get more best soundand change the sound of a suit with a video source.Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD MUSIC MOVIE SPEECH CUSTOM Select this mode to listen ...
Page 21 - Channel Memory; Storing the Channels Automatically
Channel Memory (PAL System) Storing the Channels Automatically You can scan the frequency ranges available on your television in your country andstore all the channels found automatically. The channels are stored in the order inwhich they appear in the frequency bands. It is possible that the automa...
Page 22 - Storing the Channel Manually
PAL SECAM AUTO BG DK I L Channel Memory (PAL System) Storing the Channel Manually When storing channels manually, you can choose:whether or not store each of the channels found.The number by which you wish to identify each stored channel. Press the MENU button.Result: The picture menu is displayed. ...
Page 24 - Fine Tuning Channel Reception
Channel Memory (PAL System) Fine Tuning Channel Reception If the reception is clear, you do not fine-tune the channel, as this is doneautomatically during the search and store operation.If however the signal is weak or distorted, you may have to fine-tune the channel manually. Press the MENU button....
Page 25 - Skipping Unwanted Channels
Channel Memory (PAL System) Skipping Unwanted Channels You can exclude the channels of your choice from the channel scanoperation. When you scan through the stored channels, those you havechosen to skip are not displayed. Press the MENU button. Use the VOL or VOL buttons to move the FUNCTION menu. P...
Page 26 - Teletext Decoder; Displaying Teletext Information; Teletext
Teletext Decoder Most television channels carry "teletext", pages of writteninformation that provide information such as : Television program tablesNews bulletinsWeather forecastsSports resultsSubtitles for the hard of hearing The teletext pages are organised according to six categories: Par...
Page 28 - Other Functions; SLEEP
Other Functions SLEEP You don’t have to remember to switch the set turn off before you go to sleep.The sleep timer automatically switches the set to stand-by after the preset time elapses.For selecting you desired number of minutes, press the SLEEP button several times or Continuously. OFF will appe...
Page 29 - APPENDIX B: Troubleshooting
APPENDIX B: Troubleshooting If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself.Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... Screen is blank andpower indicator is off "CHECK CABLE ...
Page 31 - APPENDIX C: Specification
TV Signal VHF Low EUAustralia PAL/SECAM, NTSC E2Ch(48.25MHz)~S10Ch(168.25MHz) 2Ch(55.25MHz)~ECh(145.25MHz) W+26Ch(451.25MHz)~78Ch(855.25MHz) E21Ch(471.25MHz)~E69Ch(885.25MHz) TuningRange Regulation EMI 3W x 2EA Other APPENDIX C: Specification Input / Output Video input PC Analog RGB A/V, S-Video, SC...
Page 32 - APPENDIX D: Display Modes
APPENDIX D: Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If thesignal from the system doesn’t equal to the standard signal mode, adjust the mode with referring to theVideo card user guide because the screen might not display or...
Page 33 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 KGTIT202Z6
