Page 2 - Table of Contents
Table of Contents Important Safety Precautions ........................................................................................................... Important Notice ...................................................................................................................................
Page 3 - Important Safety Precautions
Important Safety Precautions 1 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECT...
Page 4 - floor surfaces can cause the product to fall from the trolley.; Do not use this apparatus near water; - The display panel used in this product is made of glass.; Clean only with dry cloth
Important Safety Precautions (Continued) 2 15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the ...
Page 5 - Important Notice; About Temperature; Do not use in hot and cold rooms (locations); Cleaning and; If the cabinet becomes dirty, wipe it with a soft, dry cloth.
Important Notice 3 About Temperature Do not use in hot and cold rooms (locations) When the unit is used in rooms (locations) with low temperature, the picture mayleave trails or appear slightly delayed. This is not a malfunction, and the unit willrecover when the temperature returns to normal.Do not...
Page 6 - Preparations; Using the Remote Control; Cautions regarding use of remote control; Installing the Batteries; Precautions on battery use
Preparations 4 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of theset. Objects between the remote control and sensor window may prevent properoperation. Cautions regarding use of remote control Do not expose the remote control to shock. In addition,...
Page 7 - Antenna Connection
Preparations (Continued) 5 75-ohm coaxial cable (round cable) INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picturescreen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of ...
Page 8 - Identification of Controls
Identification of Controls 6 POWER SWITCH 1. INDICATOR2. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. Press this button to access the MENU main page. 3. MENU4. VOLUME Press the VOL or VOL button to directly increase or decrease the so...
Page 10 - Remote Control Unit
Identification of Controls (Continued) 8 Remote Control Unit 123456 789 10111213141516171819202122 POWER : Switches the TV power on or Standby TV/Radio: Switches between TV and Radio mode. (DTV only). EPG: Displays the Electronic Program Guide. (DTV only) FAV +/-: Selects the favourite channel. FAV....
Page 11 - Connections; Turn on your TV then press; SOURCE; Press or to select; OK; Turn on your VCR, insert a videotape and press the; Play; The S/PDIF OUT terminal only can output digital TV program's audio.; VCR; To play VCR; Cautions before connecting
Connections 9 1. Turn on your TV then press SOURCE button. The SOURCE menu opens. 2. Press or to select AV 1 (or S-Video if using S-VIDEO terminal), then press OK to confirm. 3. Turn on your VCR, insert a videotape and press the Play button. Carefully check the terminals for position and type before...
Page 12 - To playback Camcorder; How to connect a device using HDMI Connection:; Press or to select; Connecting a Camcorder
Connections (Continued) 10 How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your TV, then press SOURCE button. The SOURCE menu opens. 2. Press or to select AV 2 , then press OK to confirm. 3. Turn on your c...
Page 13 - To connect a device using component video:; To play video from a computer; Connecting a Computer
Connections (Continued) 11 TV REAR Device with component video To connect a device using component video: Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Proutput jacks on the device.Connect the Audio cable between the AUDIO input jacks on the u...
Page 14 - To record program; Connecting Headphones; Headphones
Connections (Continued) 12 VCR for Recording Cables are often colour-coded to connectors. Connect red to red, white to white, etc. AV cable TV REAR How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. To record program 1. Turn on your TV, select a p...
Page 15 - Basic Operations; Turning On/Off the Power
Basic Operations 13 Turning On Insert the power cord into the wall outlet. Press the Power Switch on the unit, then press the POWER button on the unit or on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the POWER button...
Page 16 - Basic Operation; Displaying the Information Banner
Basic Operation (Continued) 14 Displaying the Information Banner Selecting the Input Signal Source Press SOURCE button. Press or to select the input source. You can quickly go to first item (TV) and last item (HDMI) by pressing or button.Options include: TV - Watch the TV signal. AV1 - Watch the sig...
Page 17 - Memorizing the Channels; Auto Searching for Programs
Memorizing the Channels 15 Your TV can memorize and store all of the available programs (including TV and Radio programs). After the available programsare memorized, use Channel up/down button to scan through the available stations You can complete an auto search to search for all programs (includin...
Page 18 - To skip unnecessary channels; To sort channels; Labelling Channel
Memorizing the Channels (Continued) 16 If a channel is not already labelled, you can label the channel so you know whatchannel you are watching. Navigate to SETUP menu and press or to select Manual Adjust , and then press OK to access the sub-menu. Highlight Program , press or to select a program wh...
Page 19 - Memorising the Channels; To sort favourite channels; Favourite Channel Setup
Channels List - TV 1. TV 2 2. TV 3 7. 7 Digital 8. TV 7 70. 7 HD Digital 71. 7 Digital 1 72. 7 Digital 2 73. 7 Digital 3 22. TV 9 29 TV 10 FavoriteMove Up SkipMove Down Memorising the Channels (Continued) 17 You can make use of channel list to set up your favourite channels. In the channel list, pre...
Page 20 - Channel and Program Selection; Method 1 - Using CH or CH
Channel and Program Selection 18 Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capableof receiving both traditional analog channels and digital channels. When watching digital TV program and you want to listen to radio program, si...
Page 21 - Picture Adjustment; Customising the Picture
Picture Adjustment 19 Press MENU and the main menu screen displays. Press to select VIDEO menu, press to access the menu. Within the menu, press , , , to navigate through the optionsor adjust an option. Press OK to confirm a selection or enter a sub- menu . Aspect Ratio You can select the aspect rat...
Page 22 - Sound Adjustments; Using the MUTE; Adjusting the Volume
Sound Adjustments 20 Using the volume buttons (VOL+ and VOL- ) Press the VOL+ or VOL- to increase or decrease the volume. Using the MUTE Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again. Press MENU and the main menu screen displays. Press to ...
Page 23 - Stereo/Bilingual Selection; NICAM Broadcast Selection; Audio Track Selection; Note; Stereo/Mono Selection
Sound Adjustments (Continued) 21 Stereo/Bilingual Selection (for analog channels) You can quickly select sound multiplex mode by using the STEREO button on the remote control. NICAM Broadcast Selection This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy N...
Page 24 - Rating and Lock Setup; To create a new password; Password Setup
Rating and Lock Setup 22 Rating T Channel Lock Parental Lock Password The Password setup sub-menu is used to set a new system password or to change an existing system password. By default, thesystem password is 0000 and you may change it. To access Rating control, to lock or unlock channels, to view...
Page 25 - Channel Lock Setup
Rating and Lock Setup (Continued) 23 Rating T Channel Lock Parental Lock Password The Channel Lock function blocks the viewing of any channel for which thechannel lock has been set. Navigate to the RATE menu and use or to highlight Channel Lock item, press OK to access. Now a password is required to...
Page 26 - Power Off; Operation; Time Zone Selection
Time Zone, EPG & Sleep Timer 24 PASSIONSPASSIONSPASSIONS PASSIONSPASSIONS BLUE HEELERSBLUE HEELERS BLUE HEELERS BLUE HEELERS BLUE HEELERS 7 Digital 7 Digita1 7 Digitai2 7 Digital3 7 HD Digital 15:00-15:59 BLUE HEELERS Tom thinks he's found a suitable creche for his grandson Sam - untilrumours of...
Page 27 - Teletext
Teletext & Subtitle 25 What Is Teletext? Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.News, weather and sports information, stock exchange prices and programme previews are among the many servicesavailable. To Turn On/Off Tel...
Page 28 - To adjust the image
Image Adjustment for D-Sub (PC) Mode/Component Mode 26 Before adjusting the image, make sure that you select the correct source (D-Sub or YPbPr). Press MENU and the main menu screen displays. Press to select DISPLAY menu, press to access the menu. Within the menu, press , , , to navigate through the...
Page 29 - Troubleshooting; Remote Control
Troubleshooting 27 If after reading these operating instructions, you have additional questions related to the use of your television, please call theservices centre in your local area.Before calling service, please check the symptoms and follow suggested solutions. Remote Control Remote control doe...
Page 30 - General; Plasma Display panel
Troubleshooting 28 General One or some channels can't bedisplayed These channels may be locked. Please unlock them (see <Channel Lock Setup>section).These channels may be set skipped in the channel list. You may set it to not skippedor select them with 0-9 number buttons. Lost password You may...
Page 31 - Specifications; SVGA; DTV Technical Data; Format; VGA; Design and specifications are subject to change without notice.
Specifications 29 SVGA Type: Display Size diagonal: Power Supply: Power Consumption: Dimensions (mm): Unit Weight (kg): TV System: PDP TV 107cm AC I00-240V 50/60Hz 350W 1246(W) x 753(H) x 263(D) 39 Analogue: CCIR (PAL-B/G, NTSC (AV)) Digital: DVB-T (2K/8K OFDM) DTV Technical Data Channel Coverage VH...
Page 32 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 5944030070 YG Ver. 1.0
