Palsonic 8040PFST - Manual - manualsarea.com

Page 2 - Main features

....... PAL/NTSC/SECAM Multi-System Hyperband Hyperband English/Chinese on-screen menu display Surround sound and wide - field dynamic sound system NICAM Digital Stereo/bilingual broadcasts receivable German Stereo (IGR)/bilingual broadcasts receivable Three groups of S-VIDEO/VIDEO/AUDIO input termi...

Page 3 - Palsonic; television receiver.; Contents

Congratulations on your purchase of this colour PURE FLAT Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy themany functions and excellent effects of this receiver.Retain is manual in an easily accessible location for future referenc...

Page 4 - NOTES FOR OPERATION; Cautions For Safety

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

Page 5 - Installation and appearance; Antenna connection

Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please tu...

Page 6 - Appearance; Front view; to the remote controller.

Appearance Front view Back view 4 Note: Functions of MENU, TV/AV, SYSTEM, VOL , CH are also provided to the remote controller. Antenna input MONITOR output terminals{VIDEO, AUDIO L/MONO, R} (1) Video 1 input terminals{S-VIDEO, VIDEO, AUDIO L/MONO, R} (2) Video 2 input terminals{S-VIDEO, VIDEO, AUDIO...

Page 7 - The Remote Controller

Page 8 - Operation; Note; after turning off the power, the last TV mode picture and sound

Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red;If there are pictures appearing on the screen, the indicator is yellow.If no picture appears on the screen, push the power button on the remote controller toturn the set on, the indica...

Page 9 - Presetting the channels

1.3 Press the or button to enter into the sub-menu of Presetting the channels There are two ways to preset channels: to presetchannels automatically and to preset channels manually.Below we will describe how to preset the channelsby making use of the menu. 1. To enter into menu 1.1 Press the MENU bu...

Page 11 - llllllllllllll

When you want to store and memorise another channelwith another position, repeat steps 3.3, 3,4. After presetting the channels, you can skip unwantedprogram numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwantedprogram position of the unwanted channels . Press the or...

Page 12 - If the sound is abnormal, press the or button to select; Channel selection

Press the button, it can switch back quickly to the previouschannel. For example, the channel you previously watched is2, the present channel is 8, press the button, it will returnto channel 2, press the button it will return to channel 8. 6. The setting of colour and sound system Press the SYS butt...

Page 13 - Sound mode selection; Sound transmitting mode; On - screen display and sound source

FM mono sound two digital sound channelstransmitting dual sound two digital sound channelstransmitting dual sound one FM sound channel (The sound signal in FM channel is different from the one in NICAM channel. So when the NICAM is trans- mitting on the TV screen only displays an indicator in yellow...

Page 14 - , then press or button to; lllllllll; Picture and sound adjustment

Press the | button, you can quickly select twomodes of picture and sound quality standard:One is standard mode ( on the screen displays(" STANDARD "); The other is personal select mode (on the screendisplays " MEMORY "). 1. Picture adjustment Complete the following steps and you will...

Page 16 - SURROUND ON; button to select; SURROUND; then press; llllll

3. SURROUND SOUND Making use of surround sound, you can enjoythe dynamic sound effect that is like beingin a music hall. To make use of surroundsound, complete steps 2.1, 2.2 toselect SURROUND ON , and press the button to select SURROUND then press the or button to adjust its effect. Toturn off surr...

Page 17 - Other functions; TIMER

Press the or button to select OFF TIME. Pressingthe or button set ONCE/EVERY OFF TIME. Everytime you press the or button, it will change in thesequence of OFF EVERY ONCE OFF EVERY ------. When the setting is ONCE or EVERY OFF TIME , press the or button to select time to turn off the set, then press ...

Page 19 - External Equipment Connections; To Connect to AV input

External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to theowner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy thehigh quality...

Page 21 - Troubleshooting; Symptoms

Troubleshooting Symptoms No power, red indicatoris not lit up Poor colour, poor tint Spots appear on thescreen Stripes appear on thescreen Double images or"ghosts" Snowy picture The remote controllerdoes not work TV cabinet creaks Check the following items Be sure the power cord is plugged i...

Page 22 - Specifications

Specifications Power supply:Power consumption:Dimension (mm):Weight:CRT: TV system & channel rangeSystemPAL-D/KPAL-B/GPAL-INTSC-M USSECAM-B/GSECAM-D/K VHF1-122-122-122-132-121-12 Colour system:Sound system : Sound output:Accessories:Note : Design and specifications are subject to change without ...

Page 23 - PALSONIC CUSTOMER SERVICE

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-Z34183-00

Palsonic 8040PFST - Manual

Table of Contents:

Summary

Other Palsonic Models