Page 2 - many functions and excellent effects of this receiver.; Contents
Congratulations on your purchase of this colour PURE FLAT Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future refere...
Page 3 - H digital comb filter; Main features
. . 80cm Pure Flat picture tube PAL/NTSC/SECAM Multi - System Hyperband CHINESE/ENGLISH on-screen menu display Surround sound and wide-field dynamic sound system NICAM Digital Stereo/bilingual broadcasts receivable German Stereo (IGR) /bilingual broadcasts receivable Three groups of S-VIDEO/VIDEO/AU...
Page 4 - supply of the other type.
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...
Page 5 - Installation and appearance; Antenna connection
Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please ...
Page 6 - Appearance; Front view
Appearance Front view Back view 4 Note: Functions of MENU, AV, SYS, CH , VOL+/- are also provided to the remote controller. Antenna input MONITOR output terminals{VIDEO, AUDIO L/MONO, R} (1) Video 1 input terminals{S-VIDEO, VIDEO, AUDIO L/MONO, R} (2) Video 2 input terminals{S-VIDEO, VIDEO, AUDIO L/...
Page 7 - The Remote Controller
Page 8 - Operation; after turning off the power, the last TV mode picture and sound
Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red;If there are pictures appearing on the screen, the indicator is yellow.If no picture appears on the screen, push the power button on the remote controller toturn the set on, the indica...
Page 9 - Press the or button to enter into the sub-menu of; Presetting the channels; To enter into menu; Press the MENU button to enter into the main; lllllllllllll
1.3 Press the or button to enter into the sub-menu of Presetting the channels There are two ways to preset channels: to presetchannels automatically and to preset channels manually. Below we will describe how to preset the channelsby making use of the menu. 1. To enter into menu 1.1 Press the MENU b...
Page 10 - VHFL
3. MANUAL SEARCH If AUTO-SEARCH cannot preset the desired channels,or you want to preset the desired channels one byone with the preferred channel numbers - please makeuse of MANUAL SEARCH. Press the menu item select button or to selectMANUAL SEARCH (the caption on the screen arered). Press the or b...
Page 11 - Manual Fine Tuning; Skip unwanted program numbers; llllllllllllll
When you want to store and memorise another channelwith another position, repeat steps 3.3, 3,4. After presetting the channels, you can skip unwantedprogram numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwantedprogram position of the unwanted channels . Press the or...
Page 12 - The setting of colour and sound system; Making use of the CH button; Making use of the button; Channel selection
6. The setting of colour and sound system Press the SYS button, the screen will display colour andsound system. If the displaying colour is abnormal, press the or buttonto select COLOUR, then press the or button to selectthe right colour system. Every time you press or button,the colour system will ...
Page 13 - Sound mode selection; Sound transmitting mode
FM mono sound two digital sound channelstransmitting dual sound two digital sound channelstransmitting dual sound one FM sound channel (The sound signal in FM channel is different from the one in NICAM channel. So when the NICAM is trans- mitting on the TV screen only displays an indicatior in yello...
Page 14 - Picture adjustment; lllllllll; Picture and sound adjustment
Press the | button, you can quickly select twomodes of picture and sound quality standard:One is standard mode ( on the screen displays(STANDARD);The other is personal select mode (on the screendisplays "MEMORY"). 1. Picture adjustment Complete the following steps and you will adjust thepict...
Page 15 - Note: During the process of picture and sound ad-
2. Sound adjustment Complete the following steps and you will adjust thesound quality. Press the MENU button to display the mainmenu. Press the or button to selectSOUND , then press the or button to enterinto the sub-menu of SOUND.Press the or button to select your requiredsound adjustment item (the...
Page 16 - llllll
3. SURROUND SOUND Making use of surround sound, you can enjoythe dynamic sound effect that is like beingin a music hall. To make use of surroundsound, complete steps 2.1, 2.2 toselect SURROUND ON, and press thebutton to select SURROUND then pressthe or button to adjust its effect. Toturn off surroun...
Page 17 - Other functions
Press the or button to select OFF TIME. Pressingthe or button set ONCE/EVERY OFF TIME. Everytime you press the or button, it will change in thesequence of OFF EVERY ONCE OFF EVERY------. When the setting is ONCE or EVERY OFFTIME, press the or button to select time to turn off the set, then press the...
Page 18 - Selecting the menu language
Pressing the button set the TV into standbymode. At the preset time the TV will automaticallyturn on to preset channel. To cancel ONTIME, set ON TIME OFF. 1.3 CLOCK The built-in clock employs the 24-hour system. Do step 1.1.1 to enter into the sub-menu ofTIMER.Press the or button to select CLOCK.Pre...
Page 19 - External Equipment Connections; To Connect to AV input
External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to theowner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy thehigh quality...
Page 20 - If the colour of video input is abnormal; , the colour system setting may be incorrect. Press the; Note on the S-VIDEO terminal; TV
To select the input press the VIDEO button on the TV set or the AV button on the remotecontroller repeatedly until you see the corresponding input indication on the screen. To return toaerial input, press the AV button until it displays programme number, or press direct channelselect button or the C...
Page 21 - Troubleshooting; Symptoms
Troubleshooting Symptoms No power, red indicatoris not lit up Poor colour, poor tint Spots appear on thescreen Stripes appear on thescreen Double images or"ghosts" Snowy picture The remote controllerdoes not work The drawer of the con-troll buttons opensslowly The drawer of the con-trol butt...
Page 22 - Specifications
Specifications Power supply: Power consumption: Dimension(mm): Weight: CRT: TV system & channel range System PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K VHF 1-12 2-12 2-12 2-13 2-12 1-12 A-6-A-l,A-W,AA-F’FF X ~ Z + 2, S1~S4 Colour system: Sound system : Sound output: Accessories : NICAM7...
Page 23 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-34F83-00
