Palsonic 6158 - Manual - manualsarea.com

Page 2 - Contents

Congratulations on your purchase of this Palsonic colour television receiver.We recommend that you thoroughly read this manual before use to fully enjoy themany functions and excellent effects of this receiver.Retain is manual in an easily accessible location for future reference. Contents Main feat...

Page 3 - Main features; Four picture mode settings.

......... Main features Hyperband. Auto/manual search. 100 preset channels. Multi-system: PAL-B/G, NTSC-4.43/3.58 (AV). No-signal blue background display and AUTO-POWER-OFF function. Four picture mode settings. Sound mute function. Sleep timer. AV IN/OUT, S-VHS operation function. 2

Page 4 - supply of the other type.

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

Page 5 - Installation and appearance; Antenna connection

Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please ...

Page 6 - Appearance; Front view

CH (UP) CH (DOWN) Appearance Front view Back view 5 ANTENNA INPUT AV OUT(VIDEO, AUDIO L/MONO R) AV2 IN(VIDEO, AUDIO L/MONO R) S-VHS IN AV1 IN(VIDEO, AUDIO L/MONO R) INDICATOR INDICATOR REMOTE SENSOR MENU TV/AV POWER SWITCH VOL+ (UP) VOL- (DOWN)

Page 7 - The remote controller; button on the remote; Preset; and; Function; menus the; SYS

The remote controller Standby Channel direct select Sleep timer Picture mode selection *Sound system select Previous channel On screen recall Colour system select Picture control Volume control Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remo...

Page 8 - Operation; Turning the power on/off; Menu operation; MENU; CH

Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the ...

Page 9 - Item; VOL

8 2. PRESET menu PROG 28 SYS 1 SKIP OFF AUTOAFT ON SEARCH BAND U MANUAL 1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personalpreference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected i...

Page 10 - PROG; SKIP ON

Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off.Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the cu...

Page 11 - AUTO

10 3. FUNCTION menu STD AUTO BLUE ON Making use of the FUNCTION menu can select BLUE ON/OFF and current channel’s colour and sound system. SYS 1 6) Auto - search (AUTO) Press CH button to highlight AUTO . Press VOL button the set will automatically search and store the active TV signals in your loca...

Page 12 - Channel selection; Using direct select buttons; Using CH button

Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system is automatically identified. In normal circumstances, pleaseset colour system to AUTO . 2) SYS (sound system) selection....

Page 13 - Picture and volume adjustment; Picture adjustment; PIC; lllllllllll

You can press the button to mute the sound. Press the button again or VOL button. The sound is restored to normal. 2. Volume adjustment You can press the VOL button to adjust the volume, and the green bar will move rightward or leftward, the volume output range is 0-63. SOUND MUTE MODE NORMAL SOUND ...

Page 14 - Other functions; TV colour system selection; MILD; Picture mode selection; MEMORY

13 Press the button and the upper right corner will display the current channel number and TVsystem. After 4 seconds the display on the screen will disappear. Other functions 1. Retain on-screen display In VIDEO mode, it will only display VIDEO l (or VIDEO 2) and the colour system. 2. TV colour syst...

Page 17 - External equipment connection

External equipment connection This set is incorporated with Audio & Video input and output terminals which allows directconnection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) forplaying back and recording the programs. 1. Video playback If your video equipment ...

Page 18 - According to the following figure connect the TV set to the VCR.

2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen. 17

Page 19 - Troubleshooting; Symptoms

Troubleshooting Symptoms The set cannot be turnedon, red indicator is off Poor colour, poor tint Spots appear on thescreen Stripes appear on thescreen Double images or"ghosts" Snowy picture The remote controllerdoes not work Check the following items Be sure the power cord is plugged in or t...

Page 20 - Specifications; 1cm Diagonal, blackstripe picture tube

Specifications Power supply: Receiving channel: TV system: Dimension(mm): Weight: CRT: Power consumption: Antenna impedance: Sound output: Accessories: Note : Design and specifications are subject to change without notice. AC 240V, 50Hz VHFL 0~5, 5A; VHFH 6~11; UHF E21-E69 PAL-B/G, PAL-60, NTSC 3.58...

Page 21 - PALSONIC CUSTOMER SERVICE

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-25703-0

Palsonic 6158 - Manual

Table of Contents:

Summary

Other Palsonic Models