Palsonic 3499M - Manual - manualsarea.com

Page 2 - Contents

Congratulations on your purchase of this Palsonic colour television receiver.We recommend that you thoroughly read this manual before use to fully enjoy themany functions and excellent effects of this receiver.Retain is manual in an easily accessible location for future reference. Contents Main feat...

Page 3 - Main features; Voltage synthesised system

........... Main features Hyperband. Auto/manual search. Voltage synthesised system 100 preset channels. TV system: PAL-B/G, NTSC-4.43/3.58 (AV). Full function remote control & English on screen menu display No-signal blue background display and AUTO-POWER-OFF function. Four picture mode setting...

Page 4 - supply of the other type.

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

Page 5 - Installation and appearance; Antenna connection

Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please ...

Page 6 - Appearance; Front view

Appearance Front view Back view 5 CHCHVOL STANDBY MENUTV/AVVOL INDICATORREMOTE SENSORPOWER SWITCH ANTENNA INPUT VIDEO IN/OUTAUDIO IN/OUT

Page 7 - The remote controller; button on the remote; Preset; and; Function; menus the; SYS

The remote controller Standby Channel direct select Sleep timer Picture mode selection *Sound system select Previous channel On screen recall Colour system select Picture control Volume control Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remo...

Page 8 - Operation; Turning the power on/off; Menu operation; MENU; CH

Press again Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right co...

Page 9 - Item; VOL

8 PROG 28 SYS 1 SKIP OFF AUTOAFT ON SEARCH BAND U MANUAL 1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personalpreference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highligh...

Page 10 - PROG; VL

Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off.Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the cu...

Page 11 - MANUAL

10 STD AUTO BLUE ON Making use of the FUNCTION menu can select BLUE ON/OFF and current channel’s colour and sound system.Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system...

Page 12 - In this TV model this item is ineffective. (Refer to the; NOTE; Select and highlight; button to select ON or OFF. When; Channel selection; Using direct select buttons; Two digit mode; Using CH button; Making use of button

2) SYS (sound system) selection. In this TV model this item is ineffective. (Refer to the NOTE on page 6) 3) BLUE ON/OFF selection. Select and highlight BLUE ON/OFF . Press VOL button to select ON or OFF. When "BLUE ON" is selected, blue background will appear on the screen automatically whe...

Page 13 - Picture and volume adjustment; Picture adjustment; PIC; lllllllllll

You can press the button to mute the sound. Press the button again or VOL button. The sound is restored to normal. 2. Volume adjustment You can press the VOL button to adjust the volume, and the green bar will move rightward or leftward, the volume output range is 0-63. SOUND MUTE MODE NORMAL SOUND ...

Page 14 - Other functions; TV colour system selection; MILD; Picture mode selection; MEMORY

13 Press the button and the upper right corner will display the current channel number and TVsystem. After 4 seconds the display on the screen will disappear. Other functions 1. Retain on-screen display In VIDEO mode, it will only display VIDEO l (or VIDEO 2) and the colour system. 2. TV colour syst...

Page 17 - External equipment connection; playing back and recording the programs.; RECORDING FROM THE TV SET; The figure below shows how to connect the TV set to the VCR.

Press AV button on the remote control unit to set TV mode, and choose the desired channel. At this time, the program recorded is displayed on the screen. Note: the following mis-operation should be avoided during recording. * Press STANDBY button or set to VIDEO mode. * Change the current channel ac...

Page 19 - TROUBLE SHOOTING

TROUBLE SHOOTING Symptoms Check these things Try these adjustment No picture,no sound. Be sure power cord is plugged in. May be station trouble. Check antenna connections. Maybe in AV mode. Press POWER BUTTON Try another channel. Press AV button once. Poor sound,picture OK. May be station trouble. M...

Page 20 - SPECIFICATIONS

SPECIFICATIONS Power Supply Receiver Channel Cable Channel TV System Dimension (mm) Weight CRT Power Consumption Antenna Impedance Remote Control Unit Power Supply Accessories Note : Design and specifications are subject to change without notice. : AC 240V, 50Hz : VHFL 0~5, 5A; VHFH 6~11; UHF E21-E6...

Page 21 - PALSONIC CUSTOMER SERVICE

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-37F03-11

Palsonic 3499M - Manual

Table of Contents:

Summary

Other Palsonic Models