Orion HCCA 12.2 Manual - Free PDF Download

Page 1 - Product Identification and Compatibility

Listing of compatible subwoofer models, including Orion HCCA compatibility.

Page 2 - Manual Table of Contents

Outline of the instruction manual covering speaker installation, wiring configurations, enclosure design recommendations, and specifications.

Page 3 - Subwoofer Introduction and Installation Guidance

Performance features, safety warnings regarding high sound pressure levels, proper installation procedures, and recommended cone orientation.

Page 4 - Installation Tools and Component Diagram

Tools required for installation, guidance on optimal speaker mounting locations, and a diagram of internal speaker components.

Page 5 - Speaker Driver Technical Specifications

Technical specifications for 21 components of a speaker driver, including material composition, features, and cooling system elements.

Page 6 - Re-cone Kits and Amplifier Power Ranges

Availability of re-cone kits for specific ORION HCCA models, part numbers, and recommended amplifier power ranges for various wiring configurations.

Page 7 - Wiring a Single Dual 2-Ohm Woofer in Parallel

Instructions and diagram for wiring a single dual 2-ohm voice coil woofer in parallel to an amplifier to achieve a 1-ohm load.

Page 8 - Wiring Two Dual 4-Ohm Woofers in Parallel

Instructions and diagram for wiring two dual 4-ohm voice coil woofers in parallel to achieve a 1-ohm load.

Page 9 - Wiring a Single Dual 4-Ohm Woofer in Parallel

Instructions and diagram for wiring a single dual 4-ohm voice coil woofer in parallel to result in a 2-ohm load.

Page 10 - Wiring Two Dual 2-Ohm Woofers in Series-Parallel

Instructions and diagram for wiring two dual 2-ohm voice coil woofers in a series-parallel configuration to present a 2-ohm load.

Page 11 - Wiring Three Dual 4-Ohm Woofers in Series-Parallel

Instructions and diagram for wiring three dual 4-ohm voice coil woofers in a series-parallel configuration to present a 2.67-ohm load.

Page 12 - Wiring a Single Dual 2-Ohm Woofer in Series

Instructions and diagram for wiring a single dual 2-ohm voice coil woofer in series to result in a 4-ohm load.

Page 13 - Wiring Four Dual 4-Ohm Woofers in Series-Parallel

Instructions and diagram for wiring four dual 4-ohm voice coil woofers in a series-parallel configuration to produce a 2-ohm load.

Page 14 - Wiring Four Dual 2-Ohm Woofers in Series-Parallel

Instructions and diagram for wiring four dual 2-ohm voice coil woofers in a series-parallel configuration to present a 1-ohm load.

Page 15 - Wiring Single Woofer to Two Amplifiers

Instructions and diagram for wiring a single dual 2-ohm voice coil woofer to two separate amplifiers, resulting in a 2-ohm load per amplifier.

Page 16 - Wiring Single Woofer to Two Amplifiers

Instructions and diagram for wiring a single dual 4-ohm voice coil woofer to two separate amplifiers, achieving a 4-ohm load per amplifier.

Page 17 - Sealed Enclosure Design Specifications

Design requirements for a sealed enclosure, including air tightness, wood glue quality, minimum board thickness, mounting plate specifications, and woofer orientation notes.

Page 18 - Dimensional Specifications for Sealed Enclosures (HCCA 10.2 & 10.4)

External and internal dimensions, wall thickness, and part measurements for constructing a sealed enclosure compatible with HCCA 10.2 and 10.4 drivers, specifying front mounting.

Page 19 - Dimensional Specifications for Vented Enclosures (HCCA 10.2 & 10.4)

External and internal dimensions, wall thickness, and part dimensions for constructing a vented enclosure compliant with HCCA 10.2 and 10.4 standards, including vent specifications.

Page 20 - Dimensional Specifications for Sealed Enclosures (HCCA 12.2 & 12.4)

External and internal dimensions, wall thickness, and part measurements for constructing a sealed enclosure compatible with HCCA 12.2 and 12.4 drivers, including front mounting recommendations.

Page 21 - Dimensional Specifications for Vented Enclosures (HCCA 12.2 & 12.4)

External and internal dimensions of a cube-shaped vented enclosure, wall thickness, part dimensions, and vent specifications for HCCA 12.2 and 12.4 standards.

Page 22 - Dimensional Specifications for Sealed Enclosures (HCCA 15.2 & 15.4)

External and internal dimensions, wall thickness, and part breakdowns for constructing a sealed enclosure compatible with HCCA 15.2 and 15.4 drivers, including driver mounting location.

Page 23 - Dimensional Specifications for Vented Enclosures (HCCA 15.2 & 15.4)

External and internal dimensions, wall thickness, component parts, and vent options for constructing a vented enclosure compliant with HCCA 15.2 and 15.4 standards.

Page 24 - Directed Speaker Technical Specifications

Detailed technical specifications, Thiele/Small parameters, physical driver dimensions, and recommended enclosure sizes for three Directed speaker models (27302, 27304, 27307), including enclosure details.

Page 25 - Woofer Model Technical Specifications

Detailed technical specifications, Thiele/Small parameters, physical dimensions, and recommended enclosure sizes for three woofer models (27309, 27312, 27314), noting measurement methodology.

Page 26 - Warranty Disclaimer

Warranty disclaimer stating the product is sold as-is without warranties and seller liability limitations regarding damages or performance issues.