OPTOMA TX773 - Manual - manualsarea.com

Page 2 - Usage Notice; Precautions; Follow all warnings, precautions and maintenance as recom-

2 English Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Donotlookintotheprojector’slenswhenthelampis on.Thebrightlightmayhurtyoureyes. Warning- To reduce the risk of fire or electric shock, ...

Page 4 - Introduction; Product Features; Congratulations and thank you for choosing an Optoma

4 English Introduction Product Features Congratulations and thank you for choosing an Optoma digital projector. This product is a XGA single chip 0.7” DLP ® projector. Outstanding features include:  True XGA, 1024 x 768 addressable pixels  Texas Instruments Single chip DLP ® Technology  NTSC/NTSC...

Page 5 - Package Overview; This projector comes with all the items shown below. Check to

English Introduction Power Cord 1.8m VGA Cable 1.8m WirelessRemote Controller CompositeVideoCable 1.8m (available in USA andASIAregionsonly) Projectorwithlenscap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi...

Page 6 - Main Unit; Product Overview

6 English Introduction 1. Control Panel 2. ZoomLever 3. FocusRing 4. ElevatorButton(oneoneachside) 5. Elevator Foot 6. IR Receivers 7. Power Button 8. Power Socket 9. ConnectionPorts Main Unit Product Overview 1 2 4 5 3 9 8 2 7 6

Page 7 - Control Panel

English Introduction Control Panel 1. Lamp Indicator LED 2. TempIndicatorLED 3. Power/StandbyLED 4. Menu(On/Off) 5. Enter 6. IR Receiver 7. Keystone +/- 8. Four Directional Select Keys 9. Re-Sync 10. Source Select 3 2 1 4 5 6 9 10 8 7

Page 8 - Connection Ports

English Introduction Connection Ports 1. DVI-D Input Connector (PC Digital/HDTV/HDCP Input) 2. VGA1-In Connector (PC Analog signal/HDTV/Component VideoInput) 3. Audio Input Connector (For DVI-D or VGA1-In) 4. S-VideoInputConnector 5. Audio Input Connector (For S-Video) 6. Composite Video Input Conne...

Page 9 - Remote Control with Mouse Function and

English Introduction Remote Control with Mouse Function and Laser Pointer 1. Power 2. Re-Sync 3. Keystone Correction 4. DisplayFormat 5. Mouse 6. Mouse Right Click 7. Page Up 8. Page Down 9. FourDirectionalSelect Keys 10. Enter 11. S-Video Source 12. Composite Video Source 13. DVI Source 14. Source ...

Page 10 - Installation; Connecting the Projector; Connect the Computer/Notebook

0 English Installation Connecting the Projector  Duetothediffer- enceinapplications for each country, someregionsmay havedifferentacces- sories. S-VideoOutput VideoOutput DVD Player, Set- top Box, HDTVreceiver RGB 1.......................................................................................

Page 11 - Connect the Video

English Installation Connect the Video  Duetothediffer- enceinapplications for each country, someregionsmay havedifferentacces- sories. 1...............................................................................................................PowerCord 2...........................................

Page 12 - Powering On the Projector; Powering On/Off the Projector

2 English Installation Powering On the Projector 1. Remove the lens cap.  2. Ensurethatthepowercordandsignalcablearesecurely connected.ThePowerLEDwillturnred. 3. Turnonthelampbypressing“Power/Standby”buttonon thecontrolpanel.  AndthePowerLEDwillturngreen. 4. Turn on your source (computer, notebook...

Page 13 - Warning Indicator

3 English Installation Warning Indicator  When the “TEMP” indicator turns red, it indicates the pro- jectorhasoverheated.Theprojectorwillautomaticallyshut itselfdown.  When the “LAMP” indicator turns red, it indicates a prob- lemwiththelamp.Turnofftheprojectoranddisconnectthe power cord from the e...

Page 14 - Adjusting the Projected Image; Adjusting the Projector Image Height; The projector is equipped with elevator feet for adjusting the

4 English Installation Adjusting the Projected Image Adjusting the Projector Image Height TiltAdjustingFeet ElevatorFoot ElevatorButton The projector is equipped with elevator feet for adjusting the image height. Toraisetheimage: 1. Press the elevator button  . 2. Raisetheimagetothedesiredheightang...

Page 15 - Adjusting the Projector Zoom / Focus; Adjusting Projection Image Size

English Installation 61.5" (156.3cm) 102.5" (260.4cm) 143.5" (364.6cm) 184.5" (468.8cm) 250.2" (635.4cm) 36.9" (93.8cm) 73.8" (187.5cm) 123.0" (312.5cm) 172.2" (437.5cm) 221.5" (562.5cm) 300.2" (762.5cm) 4.9'(1.5m) 40.0'(12.2m) 29.5'(9.0m) 23.0'(7.0m) 16.4...

Page 16 - User Controls; RemoteControl; Control Panel & Remote Control; There are two ways for you to control the functions: Remote; UsingtheControlPanel

6 English User Controls RemoteControl ControlPanel Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. UsingtheControlPanel Power Refertothe“PowerOn/OfftheProjector”section on pages 12-13. Source Press“Source”toselectaninputsignal...

Page 17 - UsingtheRemoteControl

English User Controls UsingtheRemoteControl Power Refertothe“PowerOn/OfftheProjector”section on pages 12-13. Re-Sync Automatically synchronizes the projector to the inputsource. Keystone Adjustsimagedistortioncausedbytiltingthe projector (±16 degrees). Display Format Displaythe“DisplayFormat”section...

Page 18 - Video; DVI

English User Controls Video Choosecompositevideosource. S-Video ChooseS-videosource. VGA1 ChooseprimaryVGA-Insource. VGA2 ChoosesecondaryVGA-InsourceorSCART source. DVI ChooseDVI-Dsource.

Page 19 - The Projector has multilingual On Screen Display menus that; How to Operate; On Screen Display Menus

English User Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control or ControlPanel. 2. W...

Page 20 - Menu Tree

Page 21 - DisplayMode

2 English User Controls DisplayMode There are many factory presets optimized for various types of im-ages.  Presentation:GoodcolourandbrightnessfromPCinput.  Bright: Maximum brightness from PC input.  Video:Pleasingvideo.  Cinema:Highcontrastandcolouraccuracy.  sRGB:Standardisedaccuratecolour. ...

Page 22 - Saturation

22 English User Controls ColourTemp. Adjusts the colour temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. Saturation Adjustsavideoimagefromblackandwhitetofullysaturated colour.  Pressthe todecreasetheamountofsaturationintheimage.  Pressthe ...

Page 23 - Frequency

23 English User Controls Frequency “Frequency”changesthedisplaydatafrequencytomatchthefre- quency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Phase “Phase” synchronizes the signal timing of the display with the graphic card. ...

Page 25 - ColourAdjustment; Colour; Language

2 English User Controls ColourAdjustment Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advancedadjustmentoftheindividualcolors. Colour Adjustment Language Language ChoosethemultilingualOSDmenu.Usethe or keytoselect yourpreferredlanguage.Press “Enter” to finalize the selection.

Page 26 - MenuLocation; Management

26 English User Controls MenuLocation Choosethemenulocationonthedisplayscreen. Projection  Front-Desktop Thefactorydefaultsetting.  Rear-Desktop When you select this function, the projector reverses the image soyoucanprojectfrombehindatranslucentscreen.  Front-Ceiling When you select this functio...

Page 28 - Security

2 English User Controls Security  SecurityTimer:Canbeselectthetime(month/day/hour)func- tiontosetthenumberofhourstheprojectorcanbeused.Once thetimehaselapsedyouwillberequestedtoenteryourpass- wordagain.  ChangePassword Use number buttons to select your password, and then press “Enter” key to confi...

Page 29 - Lamp Setting

2 English User Controls Lamp Setting ProjectionHours Displaystheprojectiontime. LampHours Displaysthecumulativelampoperatingtime. ResetLampHours Resetsthelamplifehourcounterafterreplacingthelamp. LampReminder Choosethisfunctiontoshowortohidethewarningmessage whenthechanginglampmessageisdisplayed.The...

Page 30 - Appendices; Problem: No image appears on screen; Troubleshooting; If you experience trouble with the projector, refer to the follow-

30 English Appendices Problem: No image appears on screen  Ensureallthecablesandpowerconnectionsarecorrectlyand securelyconnectedasdescribedinthe“Installation”section.  Ensurethepinsofconnectorsarenotcrookedorbroken.  Checkiftheprojectionlamphasbeensecurelyinstalled.Please refertothe“Replacingthe...

Page 31 - Problem: The screen of the Notebook or PowerBook computer

3 English Appendices 5. Select the “Change” button under the “Monitor” tab.6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.  IfyouareusingaNotebook: 1. First, follow the steps above to adjust resoluti...

Page 32 - Problem: The image is stretched when displaying 16:9 DVD

32 English Appendices  Make sure the projection screen is between distance 4.9 to 40.0 feet (1.5 to 12.2 meters) from the projector. See page 15. Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full ...

Page 33 - Problem: Message Reminders

33 English Appendices Problem: Message Reminders  Fanfail:  Overtemperature:  PowerOff:  Replacethelamp:

Page 34 - Replacing the Lamp; Lamp Replacement Procedure:

34 English Appendices Replacing the Lamp Theprojectorkeepstrackofthelampusage.Itwillshowyoua warningmessage When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutesbeforechangingthelamp. Warning:Lamp compartmentishot! Allow 30 ...

Page 35 - Compatibility Modes

3 English Appendices Remark:“ * ”com- pressedcomputer image. Compatibility Modes Mode Resolution (ANALOG) (DIGITAL) V.Frequency (Hz) H.Frequency (kHz) V.Frequency (Hz) H.Frequency (kHz) VESAVGA 640 x 350 70 31.5 70 31.5 VESAVGA 640 x 350 85 37.9 85 37.9 VESAVGA 640 x 400 85 37.9 85 37.9 VESAVGA 640 ...

Page 37 - Ceiling Mount Installation; Maximum screw length: 10mm

3 English Appendices  Pleasenotethat damageresultingfrom incorrectinstallation willinvalidatethewar- ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mountpackageforinstallation. 2. If you wish to use a third party ceiling mount kit, please ensurethesc...

Page 38 - Optoma Global Offices; For service or support please contact your local office.

3 English Appendices Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optomausa.com Service:[email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-8...

Page 39 - Optoma France

3 English Appendices Optoma France Batiment E Tel.: +33 1 41 46 12 20 81-83 avenue Edouard Vaillant Fax : +33 1 41 46 94 35 92517 Boulogne Billancourt, France Servicel : [email protected] Optoma Deutschland Werftstrasse 25 Tel : +49 (0) 211 506 6670 D40549 Düsseldorf, Fax : +49 (0) 211 506 66799 G...

Page 40 - Regulation & safety notices; FCC notice

40 English Appendices Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...

Page 41 - Operation conditions

4 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation issubjecttothefollowingtwoconditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, i n c l u d i n g i n t e r f e r e n c e t h a t m...

OPTOMA TX773 - Manual

Table of Contents:

Summary

Other OPTOMA Models