Page 2 - English; Usage Notice; Safety Information; Class B emissions limits
2 English Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to p...
Page 3 - Precautions; Please follow all warnings, precautions and
3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀ ■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ Warning- To reduce the risk of fire or electric ...
Page 5 - Eye Safety Warnings; BrilliantColor
5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In...
Page 6 - Introduction; Package Overview; Unpack and inspect the box contents to ensure
6 English Introduction POW ER ? Documentation : User’s Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) Due to different applications in each Country, some regions may have different accessories. Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box ...
Page 7 - Product Overview; Main Unit; Connections
7 English Introduction Product Overview Main Unit 1. Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. IR Receivers 6. Tilt-Adjustment Feet 7. Security Bar 8. Input / Output Connections 9. Power Socket VGA1-IN / YPbPr / VGA2-IN / SCART / YPbPr VGA-OUT S-VIDEO VIDEO AUDIO-OUT (VGA1) AUDIO1-IN ...
Page 8 - Control Panel; Keystone Correction
8 English Introduction Control Panel POWER ? 1. Help 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Power 7. Keystone Correction 8. Four Directional Select Keys 9. On/Standby LED 10. Lamp Fail LED 11. Temp LED 12. IR Receiver 8 6 2 4 5 3 7 11 10 9 1 12
Page 9 - Input/Output Connections; USB Connector (Connect to PC for Remote Mouse; Lock Port
9 English Introduction Input/Output Connections Monitor loop through only sup - port in VGA1-In/ SCART/YPbPr. 1. RJ-45 Networking Connector 2. USB Connector (Connect to PC for Remote Mouse function) 3. HDMI Connector 4. VGA1-In/YPbPr/ Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr/ W...
Page 10 - Remote Control; Four Directional
10 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 8. Volume +/- 9. 3D 10. AV mute 11. Video 12. PC/Mouse control 13. Mouse Left Click 14. Enter/Help 15. Source 16. Keystone +/- 17. Menu 18. ...
Page 11 - Installation; Connect to Computer/Notebook; Connecting the Projector
11 English Installation VGA1-IN / YPbPr / VGA2-IN / SCART / YPbPr VGA-OUT S-VIDEO VIDEO AUDIO-OUT (VGA 1) AUDIO1-IN RS-232 USB (VGA 2) AUDIO2-IN HDMI R-J45 (S-VIDEO/VIDEO) AUDIO3-IN E62405SP R MOLEX 12V OUT 1 4 2 3 7 6 5 8 9 Connect to Computer/Notebook Connecting the Projector Due to the differen...
Page 12 - Connect to Video Sources
12 English Installation Connect to Video Sources Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory VGA1-IN / YPbPr / VGA2-IN / SCART / YPbPr VGA-OUT S-VIDEO VIDEO AUDIO-OUT (VGA 1) AUDIO1-IN RS-232 USB (VGA 2) AUDIO2-IN HD...
Page 13 - Powering the projector On / Off; Powering On the Projector; ” button either on the top of; Lens Cap
13 English Installation Powering the projector On / Off Turn on the projector first and then select the signal sources. Powering On the Projector 1. Remove th e lens cap. 2. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 3. Turn on the la...
Page 14 - Warning Indicator
14 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 64-65 for more information. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: “LAMP” LED indicator is lit red and if “ POWER/...
Page 15 - Adjusting the Projected Image; Adjusting the Projector’s Height; The projector is equipped with elevator feet for adjusting; Locate the adjustable foot you wish to modify on the
15 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the...
Page 16 - Adjusting the Projector’s Focus; To focus the image, rotate the focus ring until the image is clear.; Adjusting Projection Image Size; Focus Ring
16 English Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. WXGA series: The projector will focus at distances from 3.93 to 32.8 feet (1.2 to 10.0 meters). Adjusting Projection Image Size WXGA series: Projection Image Size from 36.3...
Page 17 - WXGA
17 English Installation This table is for user’s reference only. WXGA Diagonal length (inch) size of 16:10 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (feet) Width Height Width Height wide tele wide tele (m) (feet) 44.00 0.95 0.59 37.40 23.23 1.20 1.50 3.94 4.92 0.0...
Page 18 - User Controls; Using the Control Panel; Control Panel & Remote Control
18 English User Controls Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. Enter Confirm your item selection. SOURCE Press “SOURCE” to select an input signal. Menu Press “Menu” to launc...
Page 19 - Using the Remote Control; Power
19 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Laser Press to use laser pointer. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down. En...
Page 20 - Freeze; AV mute; VGA; Video
20 English User Controls Using the Remote Control Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. AV mute Momentarily turns off/on the audio and video. S-Video Press “ S-Video ” to choose S-Video source. VGA Press “VGA” to choose VGA sources. Video Press “Video” t...
Page 21 - Using the HELP button; The HELP function
21 English User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu. POW ER ? POWER ?
Page 22 - Help menu button functions only when no input source
22 English User Controls Help menu button functions only when no input source is detected. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. Please refer to the “Troubleshooting” section on pages 49-53 for more details.
Page 24 - The Projector has multilingual On-screen Display menus that; How to operate; On-screen Display Menus
24 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypa...
Page 25 - Menu Tree
25 English User Controls Menu Tree Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC0~10 Color Temp. Warm / Medium / Cold Color Settings Color Space AUTO / RGB / YUVAUTO / RGB (0-255) /...
Page 27 - IMAGE; Display Mode; Contrast
27 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater . sRGB: Standardised accurate color. Blackboard: This m...
Page 28 - Sharpness
28 English User Controls Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image Press the to increa...
Page 29 - Gamma
29 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantCol...
Page 30 - Color Space; Input Source
30 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV. Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search...
Page 31 - DISPLAY; Format
31 English User Controls DISPLAY Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen l...
Page 32 - Edge Mask; H Image Shift
32 English User Controls 16:9 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 960 x 720 center 16:9 1280 x 720 center LBX 1280 x 960 center, then get the central 1280 x 720 image to display Native 1:1 mapping centered. 1:1 map - ping display 1280 x 720 1280 x 720 center 1:1 mapping centered. Edge Mask Edge...
Page 34 - SETUP; Language; Screen Type
34 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to finalize the selection. Screen Type Choose the screen type from16:10 or 16:9. Projection Front-Desktop This is the defaul...
Page 35 - Menu Location; Audio Input
35 English User Controls When selected, the image will turn upside down. Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user c...
Page 36 - Wireless
36 English User Controls SETUP RS232 RS232: Allow RS232 control of an individual projector. (Default setting) Network: Allow projector control via web browser (Internet Explorer) using the network. Wireless Choose the “On” to turn on the Wireless. “Wireless” is only - functional with VGA conne...
Page 37 - Automatic
37 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next...
Page 38 - Security
38 English User Controls SETUP | Security Security On: Choose “On” to use security verification when the turning on the projector. Off: Choose “Off” to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the proj...
Page 40 - Logo; Logo Capture
40 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. Neutral: Neutral startup screen. User: Use stored picture from “Logo Capt...
Page 41 - Network State; Subnet Mask
41 English User Controls SETUP | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open. On: Assign an IP add...
Page 42 - How to use web browser to control your projector
42 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. 2. Then choose apply and press “ ” button to complete the configuration process. 3. Open your web browser and type in the projector’s IP address from t...
Page 44 - Crestron RoomView Control Tool
44 English User Controls Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector’s online status, ...
Page 46 - Source Lock; High Altitude; OPTIONS
46 English User Controls Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas wh...
Page 47 - Advanced; Direct Power On
47 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown ti...
Page 48 - Lamp Settings; Lamp Hours; Lamp Reset
48 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode STD...
Page 49 - Appendices; No image appears on-screen; Troubleshooting; If you experience a problem with your projector,
49 English Appendices No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken. Check if the projection lamp has been securely installed. Plea...
Page 50 - The screen of the Notebook or PowerBook computer is not
50 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200). If you are using a No...
Page 51 - Image is out of focus
51 English Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 16. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:...
Page 52 - The projector stops responding to all controls; Lamp burns out or makes a popping sound; LED lighting message
52 English Appendices The projector stops responding to all controls If p ossible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Check that “Keypad Lock” is not activated by trying to control the projector with the remote control. Lamp...
Page 53 - On Screen Messages
53 English Appendices On Screen Messages Temperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector. M...
Page 54 - Replacing the lamp; east
54 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make s...
Page 55 - Lamp Replacement Procedure:
55 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes.3. Disconnect the power cord.4. Unscrew the two screws on the cover. 1 5. Lift up and remove the cover. 2 6. Unscrew the ...
Page 56 - Compatibility Modes; Computer Compatibility
56 English Appendices For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. 120Hz input signals may be dependent on graphics cards support. Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result ...
Page 57 - Video Compatibility
57 English Appendices Video Compatibility Computer Compatibility Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 1152 × 870 75.06 68.68 MAC G4 640 × 480 60 31.35 i MAC DV 1024 × 7...
Page 58 - RS232 Pin Assignments; RS232 Commands and Protocol
58 English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List RS232 shell is grounded. Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9
Page 59 - RS232 Protocol Function List
59 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCI...
Page 63 - Ceiling Mount Installation; Lens
63 English Appendices Please note that damage resulting from incorrect installation will void the warranty. Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used t...
Page 64 - Optoma Global Offices; For service or support please contact your local office.
64 English Appendices Optoma Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com [email protected] Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 5...
Page 66 - Regulation & Safety Notices; This appendix lists the general notices of your projector.; FCC notice; installation. This device generates, uses and can radiate radio; Notice: Shielded cables; operate this projector.
66 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...
Page 67 - Disposal instructions; Do not throw this electronic device into the
67 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subje...
