Page 2 - English; Usage Notice; Safety Information; Class B emissions limits
2 English Usage Notice Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to p...
Page 3 - Precautions; Please follow all warnings, precautions and
3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀ ■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ Warning- To reduce the risk of fire or electric ...
Page 5 - Eye Safety Warnings; BrilliantColor
5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In...
Page 6 - Introduction; Package Overview; Unpack and inspect the box contents to ensure
6 English Introduction Documentation : User’s Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) Due to different applications in each country, some regions may have different accessories. Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents ...
Page 7 - Product Overview; Power Socket; Lock Port; Main Unit
7 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 Product Overview 1. Control Panel 2. IR Receivers 3. Cable Cover 4. Speaker 5. Tilt-Adjustment Feet 6. Mirror Cover...
Page 8 - Keystone Correction; Control Panel
8 English Introduction 9 3 4 1 6 1. Lamp LED 2. Temp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu Control Panel 10 7 5 2 8
Page 9 - Input/Output Connections; Composite Video Input
9 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 Input/Output Connections 1. 12V Trigger Relay (12V, 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3. 3pin Mi...
Page 10 - Remote Control; Four Directional
10 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 8. Volume +/- 9. 3D 10. AV mute 11. Video 12. PC/Mouse control 13. Mouse Left Click 14. Enter/Help 15. Source 16. Keystone +/- 17. Menu 18. ...
Page 11 - Installation; Removing and Attaching the Cable Cover; Connecting the Projector; Procedure for Removing and Attaching; Cable Cover
11 English Installation Removing and Attaching the Cable Cover Connecting the Projector 1 2 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover. 1 2. Lift up and remove the cable cover. 2 Install the cable cover by reversing the previous steps. Cable Cover
Page 12 - Connect to Computer/Notebook
12 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 mo lex MOLEX E62405SP R Connect to Computer/Notebook 1 2 4 5 1.......................................................
Page 13 - Connect to Video Sources
13 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 E62405SP R Connect to Video Sources 1................................................................................
Page 14 - or; Powering the projector On / Off; Powering On the Projector; ” button either on the top of
14 English Installation or Powering the projector On / Off Turn on the projector first and then select the signal sources. Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 2. Turn on the lamp by pressing “ ” butto...
Page 15 - Warning Indicator
15 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 68-69 for more information. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: “LAMP” LED indicator is lit red and if “ POWER/...
Page 16 - Adjusting the Projected Image; Adjusting the Projector’s Height; The projector is equipped with elevator feet for adjusting; Locate the adjustable foot you wish to modify on the
16 English Installation Adjusting the Projected Image Adjusting the Projector’s Height Tilt-Adjustment Feet Tilt-Adjustment Ring The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate ...
Page 17 - Adjusting the Projector’s Focus; To focus the image, rotate the focus ring until the image is clear.; Adjusting Projection Image Size
17 English Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm). WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to ...
Page 18 - XGA; WXGA
18 English Installation Screen Size (B) (C) (D) (E) (α) Diagonal Width (W) Height (H) inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree 77 1956 65 1659 41 1037 31 777 6 153 10 259 19 495 55.3 80 2032 68 1723 42 1077 32 808 7 174 11 269 20 516 55.3 85 2159 72 1831 45 1144 34 858 8 214 11...
Page 19 - User Controls; Using the Control Panel; Control Panel & Remote Control
19 English User Controls Using the Control Panel Power/ Standby but - ton and LED Refer to the “Power On/Off the Projector” section on pages 14-15. Indicate the projector’s status. RE-SYNC Automatically synchronize the projector to the input source. Enter Confirm your item selection. SOURCE Press “S...
Page 20 - Using the Remote Control; Power; Select Keys; Freeze
20 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 14-15. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down. Enter / Help Confirm your item selec...
Page 21 - AV mute; VGA; Video
21 English User Controls Using the Remote Control AV mute Momentarily turns off/on the audio and video. S-Video Press “ S-Video ” to choose S-Video source. VGA Press “VGA” to choose VGA sources. Video Press “Video” to choose Composite video source.
Page 22 - Using the HELP button; The HELP function
22 English User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu.
Page 23 - Help menu button functions only when no input source
23 English User Controls Help menu button functions only when no input source is detected. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. Please refer to the “Troubleshooting” section on pages 52-56 for more details.
Page 25 - The Projector has multilingual On-screen Display menus that; How to operate; On-screen Display Menus
25 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any i...
Page 26 - Menu Tree
26 English User Controls Menu Tree EX665UTi OSD Menu Tree.xls Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC BrilliantColor™ 0~10 Color Temp. Warm / Medium / Cold Color Settings Colo...
Page 28 - IMAGE; Display Mode; Contrast
28 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater . sRGB: Standardised accurate color. Blackboard: This m...
Page 29 - Sharpness
29 English User Controls Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color. Press the to decrease the amount of saturation in the image. Press the to ...
Page 30 - Gamma
30 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantCol...
Page 31 - Color Space; Image AI
31 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV. Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search...
Page 32 - DISPLAY; Format
32 English User Controls DISPLAY Format Use this function to choose your desired aspect ratio. XGA 4:3: This format is for 4×3 input sources. 16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16×9 input sources, l...
Page 34 - Edge Mask; H Image Shift
34 English User Controls Each I/O has different setting of “Edge mask”. “Edge mask” and “Zoom” can’t work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the ...
Page 36 - SETUP; Language; Screen Type
36 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to finalize the selection. Screen Type Choose the screen type from16:10 or 16:9. Projection Front-Desktop This is the defaul...
Page 37 - Menu Location
37 English User Controls Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer t...
Page 38 - Volume; Audio Input
38 English User Controls SETUP Volume Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can ...
Page 39 - Automatic
39 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next...
Page 40 - Security
40 English User Controls SETUP | Security Security On: Choose “On” to use security verification when the turning on the projector. Off: Choose “Off” to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the proj...
Page 42 - Logo; Logo Capture; Closed Captioning
42 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. Neutral: Logo is not displayed on startup screen. User: Use stored pictur...
Page 43 - Network State; Subnet Mask
43 English User Controls SETUP | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open. On: Assign an IP add...
Page 44 - How to use web browser to control your projector
44 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. 2. Then choose apply and press “ ” button to complete the configuration process. 3. Open your web browser and type in from the OSD LAN screen then the ...
Page 46 - Crestron RoomView Control Tool
46 English User Controls Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector’s online status, ...
Page 48 - OPTIONS
48 English User Controls Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas wh...
Page 49 - Reset Dust Filter; Reset
49 English User Controls Reset Dust Filter Choose “Yes” to show or “No” to hide the warning message when the changing filter message is displayed. Reset Choose “Yes” to return the display parameters on all menus to the factory default settings.
Page 50 - Advanced; Direct Power On
50 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown ti...
Page 51 - Lamp Settings; Lamp Hours; Lamp Reset
51 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode STD...
Page 52 - Appendices; No image appears on-screen; Troubleshooting; If you experience a problem with your projector,
52 English Appendices No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken. Check if the projection lamp has been securely installed. Plea...
Page 53 - The screen of the Notebook or PowerBook computer is not
53 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200). If you are using a No...
Page 54 - Image is out of focus
54 English Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 17. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:...
Page 55 - Lamp burns out or makes a popping sound; LED lighting message
55 English Appendices Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Repla...
Page 56 - On Screen Messages
56 English Appendices On Screen Messages Temperature warning: Fan failed: Lamp warning: Out of display range: Filter warning: If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on ...
Page 57 - Replacing the lamp; east
57 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make s...
Page 58 - Lamp Replacement Procedure:
58 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes.3. Disconnect the power cord.4. Unscrew the one screw on the cover. 1 5. Lift up and remove the cover. 2 6. Unscrew the t...
Page 59 - Replacing and cleaning the dust; We recommend cleaning the dust filter after every 300 hours; Cleaning the Dust Filter Procedure:
59 English Appendices Replacing and cleaning the dust filter We recommend cleaning the dust filter after every 300 hours of use, clean it more often if the projector is used in a dusty environment. When you see this message, please find following steps for cleaning procedure: If dust builds up on ...
Page 60 - Compatibility Modes; Computer Compatibility
60 English Appendices For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. 120Hz input signals may be dependent on graphics cards support. Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result ...
Page 61 - Video Compatibility
61 English Appendices Video Compatibility Computer Compatibility Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 1152 × 870 75.06 68.68 MAC G4 640 × 480 60 31.35 i MAC DV 1024 × 7...
Page 62 - RS232 Pin Assignments; RS232 Commands and Protocol
62 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 TXD 2 RXD 3 GND RS232 Commands and Protocol Function List 3 1 2 RS232 shell is grounded.
Page 63 - RS232 Protocol Function List
63 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCI...
Page 67 - Wall Mount Installation; Lens
67 English Appendices Please note that damage resulting from incorrect installation will void the warranty. Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to a...
Page 68 - Optoma Global Offices; For service or support please contact your local office.
68 English Appendices Optoma Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com [email protected] Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 5...
Page 70 - Regulation & Safety Notices; This appendix lists the general notices of your projector.; FCC notice; installation. This device generates, uses and can radiate radio; Notice: Shielded cables; operate this projector.
70 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...
Page 71 - Disposal instructions; Do not throw this electronic device into the
71 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subje...
