Page 2 - User’s Manual; Safety
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 2 Safety 1. Read and understand instructions and heed warnings before beginning installation.2. Mount rail securely. The lens is heavy, and requires a secure and stable surface. Fastene...
Page 3 - Introduction
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 3 Introduction Thank you for purchasing the Optoma BX-AL133 anamorphic lens. The lens and motorized sled is outfitted with a custom mechanism designed exclusively for use in a home thea...
Page 4 - Getting to Know Your System
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 4 Getting to Know Your System Status LED Infrared Remote Sensor Mounting Plate Rail Reversable Logo Plate Motor Housing Cover Drive Belt Rail Bearing (X4) Lens Adaptor Plate Pulley Hous...
Page 5 - Plan Your Installation; Planning for Projector Exhaust
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 5 Plan Your Installation The lens assembly may be mounted in one of two ways: 1. To the ceiling or projector mount above the projector2. To a shelf or table below the projector When att...
Page 6 - Mounting Sled to Shelf or Ceiling; Line up the center line of lens
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 6 Mounting Sled to Shelf or Ceiling When installing the motorized sled, make sure that you first mark screw locations using only the sled−without the lens and/or the lens bracket in pla...
Page 7 - Securing the mounting plate
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 7 2. Securing the mounting plate Because the mechanism and lens are heavy, make sure the mounting fasteners and surface are extremely secure. Remember that the sled motor will be starti...
Page 8 - Setup; Power up the sled and set LENS IN position
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 8 Setup 1. Power up the sled and set LENS IN position Slide the lens into the middle of the sled before powering up. Plug the power adaptor into an AC outlet, then into the back of the ...
Page 9 - Attaching the lens to the bracket
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 9 3. Attaching the lens to the bracket Attach the Optoma BX-AL133 anamorphic lens to the bracket using the plastic knobs supplied with the lens. Adjust the anamorphic lens vertically fo...
Page 10 - Remote Control and Motor Operation; -Button Remote Control
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 10 Remote Control and Motor Operation The LED indicator on the sled will glow when the unit is ON, and flash when any button is pressed. It will also flash when the lens is in motion. T...
Page 11 - Rear Panel − Triggers and Sensors
Rear Panel View +9V DC In +12V Trigger Out +12V Trigger In Remote IR Sensor In To screen masking system From projectoror scaler User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 11 Rear Panel − Triggers and Sensors To use the automatic...
Page 12 - Cleaning and Maintenance
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 12 Cleaning and Maintenance The Optoma BX-AL133 anamorphic lens system is maintenance-free. It will deliver many years of trouble-free service as delivered from the factory. To clean: L...
Page 13 - Specifications
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 13 Specifications Electrical Characteristics Model Optoma BX-AL133 Motorized Sled Power Supply 110/120v, 50-60 Cycles Power Supply Output 9V DC, 0.5A Operating Voltage 9-18V DC, 0.5-1.5...
Page 14 - Dimensions
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 14 Dimensions 1.079” 1.52” .25” 13.738” 5.094” 4.97” 6.921” 5.973” 5.519” 3.402” 3.579” 4.511” Ø.25” 8.333” 5.375” 2.5” 7.25” 10.842” Score Mark (Pulley Side) Score Mark (Motor Side) 19...
Page 15 - Warranty
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 15 Warranty Optoma Technology Inc. warrants this product to be free of defects in original workmanship and material for a period of twenty-four (24) months from the date of purchased. D...
Page 16 - Addendum: Adapter Plate
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 16 Addendum: Adapter Plate This attachment plate is designed to be installed onto a ceiling mounted projector. The location or orientation of the ceiling mount does not need to change. ...
Page 18 - Addendum: The Finished Product
User’s Manual BX-AL133 For more information, please visit our website at: http://www.OptomaUSA.com User’s Manual | 18 Addendum: The Finished Product
Page 19 - USA
Optoma Technology, Inc. 715 Sycamore Drive, Milpitas CA 95035TELs&AX&ORMOREINFORMATIONPLEASEVISITWWW.Optoma.com. Specifications subject to change without notice. Copyright 2007 Optoma Technology, Inc. USA 715 Sycamore Drive Milpitas, CA 95035, USATel: 408-383-3700 &AXWWW.OptomaUSA.com ...
