Page 2 - Important Safety Instructions; WARNING; AVIS
2 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructi...
Page 3 - Precautions; Recording Copyright; For Canadian Models
3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —Occ...
Page 4 - —Continued; For British models; IMPORTANT; For European Models; Table of Contents; Declaration of Conformity; Introduction; Connections; Enjoying Audio Sources
4 Precautions —Continued For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue: NeutralBrown: Live As the ...
Page 5 - Supplied Accessories; Features; Discrete Output Stage Circuitry; Installing the Batteries
5 Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operation are the same regardless of color. Notes: • If the remote controller doesn’t work reliably, try replacing th...
Page 6 - Getting to Know the Receiver; Front Panel; North American Model
6 Getting to Know the Receiver Front Panel 1 5 7 9 8 J 2 3 4 6 P R K Q N L M O 1 5 7 9 8 J 2 3 4 6 P R K Q N L M O North American Model Other Models * The name of the buttons and other controls varies according to the shipping destination. For details, refer to the description on the next page.
Page 7 - CHARACTER button
7 Getting to Know the Receiver —Continued Some button number sections (such as 7 and 9 ) contain multiple button descriptions because the name and function vary according to the model or shipping destination. Refer to the description corresponding to your model.For detailed information, see the page...
Page 8 - Getting to Know the Receiver—Continued; Rear Panel
8 Getting to Know the Receiver—Continued A REMOTE CONTROL jacks These (Remote Interactive) jacks can be connected to the jacks on your other Onkyo audio components. The receiver’s remote controller can then be used to control all of your components. To use , you must make an analog audio connection ...
Page 9 - A and B speaker indicators; Display
9 Getting to Know the Receiver—Continued For detailed information, see the pages in parentheses. 1 A and B speaker indicators Indicator A lights up when speaker set A is on. Indicator B lights up when speaker set B is on. 2 MUTING indicator Flashes while the receiver is muted. 3 Radio indicators TUN...
Page 10 - Remote Controller; CD operation buttons
10 Remote Controller For detailed information, see the pages in parentheses. A STANDBY/ON button (19) Sets the receiver to On or Standby. B SLEEP button (21) Used with the Sleep function. C INPUT SELECTOR buttons (20) and number buttons (26) When any of these buttons is pressed, the input source wil...
Page 11 - Remote Controller—Continued; Reverse and Fast Forward [; Using the Remote Controller
11 Remote Controller—Continued M Previous and Next [ ]/[ ] buttons These buttons are used to select the previous or next track on an HDD component. Pressing them repeatedly selects earlier or later tracks. On a cassette deck, they’re used for rewind and fast forward. N Reverse and Fast Forward [ ]/[...
Page 12 - Connecting Your Speakers; Speaker Connection Precautions; Connecting the Speaker Cables; Unscrew the terminal.
12 Connecting Your Speakers Disconnect the power cord from the wall outlet before making any connections. The receiver allows you to connect two sets of speakers. When two sets of speakers are connected, you can select which speaker set outputs sound or use both sets to output sound simultaneously.•...
Page 13 - Connecting Antenna; The supplied indoor FM antenna is for indoor use only.; Connecting the Indoor FM Antenna; North American Model; Connecting the AM Loop Antenna
13 Connecting Antenna This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.The receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the t...
Page 14 - Connecting Antenna—Continued; • For best results, install the outdoor FM antenna well; Using a TV/FM Antenna Splitter; Connecting an Outdoor FM Antenna; Connecting an Outdoor AM Antenna
14 Connecting Antenna—Continued If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead. Notes:• Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft. • For bes...
Page 15 - Connecting Your Components; Before Making any Connections; Connecting a Turntable
15 Connecting Your Components Before Making any Connections • Always refer to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been properly made. • Do not bind audio cables with power cords and speaker cables. Doing so...
Page 16 - Connecting Your Components—Continued; cable to connect the receiver’s; Connecting a Recording Component; Connecting a DVD Player
16 Connecting Your Components—Continued To connect recording components, such as cassette deck, MD recorder and CD recorder, use an analog audio cable to connect the receiver’s TAPE 1 or 2 IN L/R jacks to the cassette deck’s analog audio output jacks, and use another analog audio cable to connect th...
Page 17 - , you must make an analog audio
17 Connecting Your Components—Continued Use an analog audio cable to connect the LINE 1/DVD IN L/R or LINE 2 IN L/R jacks to the analog audio output jacks on the connected component.When you connect a VCR, the video input from the VCR should be sent to the TV directly. If you connect other Onkyo com...
Page 18 - should be; your speakers and AV components.; • Turning on the receiver may cause a momentary; Connecting the Power Cord
18 Connecting Your Components—Continued The receiver has AC outlets on its rear panel that can be used to connect the power cords of other components that you intend to use with the receiver. These components can then be left turned on so that they turn on and off as and when the receiver is turned ...
Page 19 - Turning On the Receiver; Turning On and Standby; Changing the Input Display
19 Turning On the Receiver You can change the input display name to “HDD”. When the input display name has been changed “HDD” for TAPE 1, the display name for the other button cannot be changed to “HDD”.After you changed the input display name, you can operate the RI Dock using the remote controller...
Page 21 - Enjoying Audio Sources—Continued; You can temporarily mute the output of the receiver.; The receiver is muted.; Using Headphones
21 Enjoying Audio Sources—Continued You can temporarily mute the output of the receiver. You can connect a pair of stereo headphones (1/4-inch phone plug) to the receiver’s PHONES jack for private listening. Notes:• Always turn down the volume before connecting your headphones. • Sound output from s...
Page 22 - Adjusting the Bass; Using the Tone and Balance Controls
22 Enjoying Audio Sources—Continued This section explains functions that can be used with any input source. Adjusting the Bass The BASS control adjusts bass sounds. Turn it up to make them louder. Turn it down to make them quieter. Normally, it should be set midway. Adjusting the Treble The TREBLE c...
Page 23 - Recording; Recording the Input Source; Prepare the recorder:; • Set the recorder so that it’s ready for
23 Recording This section explains how to record the selected input source to a component with recording capability. You can record an audio signal on a recording component connected to the TAPE 1 OUT or TAPE 2 OUT jacks.When you record an audio signal on a recording component connected to the TAPE ...
Page 24 - Recording—Continued; Monitoring the Recorded Sound
24 Recording—Continued Monitoring the Recorded Sound When you record audio signal on a recording component connected to the TAPE 2 OUT jacks, you can monitor the recorded sound. The recorded sound monitoring function allows you to compare the sounds by switching the output between the sound before o...
Page 25 - Listening to the Radio; Listening to AM/FM Stations; buttons to tune the radio.
25 Listening to the Radio You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.Use the receiver to perform the procedure below. With the built-in tuner, you can enjoy AM and FM radio stations. TUNING DOWN/UP DIRECT TUNING TUN...
Page 26 - Listening to the Radio—Continued; Tuning into Stations by Frequency; Presetting AM/FM Stations; Selecting Presets; See the previous section.
26 Listening to the Radio—Continued ■ Tuning into Stations by Frequency You can tune into AM and FM stations directly by entering the appropriate frequency. Presetting AM/FM Stations You can store a combination of up to 40 of your favorite AM/FM radio stations as presets. ■ Selecting Presets ■ Delet...
Page 27 - • If the signal from an RDS station is weak, RDS data
27 Listening to the Radio—Continued RDS only works with European models and only in areas where RDS broadcasts are available.When tuned into an RDS station, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. It was dev...
Page 29 - Naming Preset Channels (other than European model); Entering a Name; Correcting a Character; Select the desired station.; The cursor moves to the right when the [UP; Enter the desired character.
29 Naming Preset Channels (other than European model) While receiving a preset FM or AM station, a maximum of 8 characters consisting of letters, numbers and some symbols can be stored, for example to represent the station name.You cannot assign a name to the RDS station (for European model). As an ...
Page 30 - Effective Sensor Layout; Making Sensor Connections
30 Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT) In order to use the remote controller to control the receiver from a remote location, you will need to prepare a multiroom kit (sold separately) such as one listed below:• Multiroom A/V distribution and control system ...
Page 31 - Troubleshooting; Can’t turn on the receiver; Power
31 Troubleshooting If you have any trouble using the receiver, look for a solution in this section. Can’t turn on the receiver • Make sure that the power cord is plugged into the wall outlet properly. • Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again. The ST...
Page 32 - Troubleshooting—Continued; The remote controller doesn’t work
32 Troubleshooting—Continued The remote controller doesn’t work • Make sure that the batteries are installed with the cor- rect polarity (page 5). • Install new batteries. Don’t mix different types of bat- teries or old and new batteries (page 5). • Make sure that the remote controller is not too fa...
Page 33 - Specifications; Amplifier Section; FM; General; Audio Inputs
33 Specifications Amplifier Section Tuner Section ■ FM ■ AM General ■ Audio Inputs ■ Audio Outputs Specifications and features are subject to change without notice. Rated Output Power (FTC) (North American) All channels: 50 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven f...
Page 34 - MEMO
