Page 2 - Introduction; Important Safety Instructions; WARNING; AVIS
2 En Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...
Page 3 - Precautions; For British models; Declaration of Conformity
3 En Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —...
Page 4 - Supplied Accessories; Make sure you have the following accessories:; Installing the batteries; Aiming the remote controller
4 En Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. ■ Installing the batteries Note • If the remote controller doesn’t wo...
Page 5 - Contents
5 En Contents Important Safety Instructions ......................................... 2Precautions....................................................................... 3Supplied Accessories ...................................................... 4Features ..............................................
Page 6 - Features; Amplifier
6 En Features Amplifier • 100 Watts/Channel @ 6 ohms (IEC)• 120 Watts/Channel @ 6 ohms (JEITA)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color *1 , Lip Sync, DTS *2 -HD Master Audio,...
Page 7 - Front Panel; t u
7 En Front & Rear Panels The page numbers in parentheses show where you can find the main explanation for each item. a 8 ON/STANDBY button ( 17 ) b HDMI THRU indicator ( 39 ) c SPEAKERS A and B buttons ( 29 ) d Remote control sensor ( 4 ) e LISTENING MODE buttons ( 26 ) f Display ( 8 ) g RT/PTY/...
Page 8 - For detailed information, see the pages in parentheses.; Display; to
8 En For detailed information, see the pages in parentheses. a A and B speaker indicators ( 29 ) b Audio input indicators c Listening mode and format indicators ( 26 , 30 ) d Audyssey indicator ( 23 , 36 ) Dynamic EQ indicator ( 36 ) Dynamic Vol indicator ( 37 ) e Tuning indicators ( 20 ) f RDS indi...
Page 9 - Remote Controller; Controlling the AV Receiver
9 En Remote Controller For detailed information, see the pages in parentheses. a 8 button ( 17 ) b REMOTE MODE/INPUT SELECTOR buttons ( 18 , 44 to 45 ) c TONE and Tone Level buttons ( 40 ) d SP A/B button ( 29 ) e Arrow q / w / e / r and ENTER buttons f SETUP button ( 32 ) g LISTENING MODE buttons (...
Page 10 - Connections; Connecting the AV Receiver; Connecting the Speaker Cables; Push-type speaker terminals; Connecting Your Speakers
10 En Connections Connecting the AV Receiver Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. ■ Push-type speaker terminals Strip 10 to 12 mm of insulation from the ends of the speaker cables, and twist the bare wires tightly...
Page 12 - About AV Connections; HDMI cable
12 En Connecting AV components • Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power cord until you’ve completed and double-checked all AV connections.• Push plugs in all the way to make good connections (loose connections can cause noise or ...
Page 13 - HDMI OUT; of the; ” is set to “; On; Connecting Components with HDMI
13 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ page 33 ). See also: • “Connection Tips and Video Signal Path” ( ➔ page 52 ) • “About HDMI” ( ➔ page 53 ) • “Using an RIHD-compatible TV, Player, or Recorder” ( ➔ ...
Page 14 - How to record the video; See “Recording” to make a connection for video recording (; Connecting Your Components
14 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ page 33 ). *1 When USB input is selected, you can input video signals from the AUX INPUT VIDEO jack. Video signals input from AUX INPUT VIDEO will be output from t...
Page 15 - Connecting Onkyo; Make the; Connecting a Recording Component
15 En With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , if the AV receiver is on Standby, it will automatically turn on and select that component as the input source. ■ Direct Change When playb...
Page 16 - Connecting Antenna; • Be careful that you don’t injure yourself when; Plug the power cord into an AC wall outlet.
16 En This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Note • Once your AV receiver is ready for use, you’ll need to tune into a rad...
Page 17 - Turning On & Basic Operations; Turning On/Off the AV Receiver; Turning On; RECEIVER; Turning Off; or; RECEIVER; RECEIVER
17 En Turning On & Basic Operations Turning On/Off the AV Receiver Tip • See “Auto Standby” about a power management setting ( ➔ page 39 ). Turning On 1 Press 8 ON/STANDBY on the front panel. or Press RECEIVER followed by 8 on the remote controller. The AV receiver comes on, the display lights. ...
Page 18 - Playback; Playing the Connected Component; • “Playing USB Device” (; Controlling Contents of USB Devices; This button cycles through pages.
18 En Playback ■ Operating with the remote controller ■ Operating on the AV receiver See “Controlling Other Onkyo Components” about the operation of other components ( ➔ page 44 ). The on-screen menus appear only on a TV that is connected to the HDMI OUT . If your TV is connected to the MONITOR OUT ...
Page 19 - Standard Mode control; Extended Mode control; Understanding Icons on the Display; ” appears on the display.
19 En Note • The buttons you can use will differ depending on the devices and media used for playback. This section describes icons that appear on the display during media playback. This section explains how to play music files on the iPod/iPhone.Compatible iPod/iPhone modelsMade for:iPod touch (1st...
Page 20 - Using the Tuner; Playing USB Device
20 En This section explains how to play music files on a USB device (e.g., USB flash drives and MP3 players).See also:• “USB Features” ( ➔ page 51 ). Note • If the media you connect is not supported, the message “ No Storage ” will appear on the display. • If you connect a USB hard disk drive to the...
Page 23 - Using Basic Functions; Measurement procedure; Using the Automatic Speaker Setup; SETUP
23 En Using Basic Functions With the supplied calibrated microphone, Audyssey 2EQ ® automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.Au...
Page 24 - Audyssey 2EQ; ENTER; ENTER
24 En Note • You can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone. • Do not connect or disconnect any speakers during Audyssey 2EQ Room Correction and Speaker Setup. • If the AV receiver is muted, it will be unmuted...
Page 25 - Error Messages; Changing the Speaker Setup Manually
25 En Error Messages While Audyssey 2EQ ® Room Correction and Speaker Setup is in progress, one of the error messages below may appear. The options are: ` Retry : Try again. ` Cancel : Cancel Audyssey 2EQ Room Correction and Speaker Setup. • Ambient noise is too high. The background noise is too lou...
Page 26 - Selecting Listening Modes; Listening Mode Buttons; About Listening Modes; Explanatory Notes; The following audio formats are supported by the listening mode.; Using the Listening Modes; MUSIC
26 En Selecting Listening Modes See “Listening Modes” for detailed information about the listening modes ( ➔ page 27 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended ...
Page 29 - Using the Home Menu
29 En The Home menu provides you quick access to frequently used menus without having to go through the long standard menu. This menu enables you to change settings and view the current information. Note *1 Depending on the input source and listening mode, not all channels shown here output the soun...
Page 30 - Setting the Display Brightness; Changing the Input Display; Using the Music Optimizer
30 En You can adjust the brightness of the AV receiver’s display. You can display various information about the current input source as follows. The following information can typically be displayed. Tip • Alternatively, you can use the AV receiver’s DISPLAY . *1 When AM or FM radio is used, the band...
Page 31 - Muting the AV Receiver; Using Headphones; Recording
31 En You can temporarily mute the output of the AV receiver. This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tap...
Page 32 - Advanced Operations; Advanced Setup; On-screen Setup Menus; Common Procedures in Setup Menu; RETURN
32 En Advanced Operations Advanced Setup Note • The on-screen setup menus are displayed when: – There is no video input, or– The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various set...
Page 33 - OPTICAL; HDMI Input
33 En Explanatory Notes Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assignme...
Page 34 - Large; Subwoofer; Small; Double Bass; Unit
34 En Menu Sp Config This section explains how to specify which speakers are connected and their sizes.For speakers with a cone diameter larger than 16 cm, specify Large (full band). For those with a smaller diameter, specify Small (default crossover 150 Hz). The crossover frequency can be changed i...
Page 35 - Multiplex/Mono Settings; Audio Adjust
35 En Menu Level Cal Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position. ■ Left, Center *1 , Right, Surround Right, Surround Left ` –12 dB to 0 dB to +12 dB in 1 dB step. ■ Subwoofer *1 ` –15 dB to 0 dB t...
Page 36 - Theater-Dimensional Setting; Listening Angle; Dynamic EQ; Reference Level; Source Setup
36 En Theater-Dimensional Setting ■ Listening Angle ` Wide : Select if the listening angle is 40 degrees. ` Narrow : Select if the listening angle is 20 degrees. With this setting, you can optimize the Theater-Dimensional listening mode by specifying the angle of the front left and right speakers re...
Page 37 - Dynamic Volume; Name
37 En ■ Dynamic Volume ` Off ` Light : Light Compression Mode becomes active. ` Medium : Medium Compression Mode becomes active. ` Heavy : Heavy Compression Mode becomes active. This setting affects volume the most, most. It quiets the loud parts, such as explosions, and boosts the quiet parts so th...
Page 38 - Audio Selector; OSD; Tuner; Hardware
38 En Audio Selector ■ Audio Selector ` ARC : The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver. *1 With this selection the TV’s audio can be automatically selected as a priority among other assignments. ` HDMI : This can be selected when HDMI IN has been assigned as...
Page 39 - Auto Standby; HDMI Through; Audio TV Out; HDMI Setup
39 En Auto Standby ■ Auto Standby ` Off ` On When “ Auto Standby ” is set to “ On ”, AV receiver will automatically perform standby operation if there is no operation for 30 minutes with no audio and no video signal input.“ Auto Standby ” will display on the display and OSD from 30 seconds before th...
Page 40 - Tone Control; Speaker Levels; Using the Audio Settings
40 En ■ Audio Return Ch (ARC) ` Off ` Auto : The audio signal from your TV tuner can be sent to the HDMI OUT of the AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to the HDMI OUT of the AV receiver. To use this function, you must select the TV/...
Page 41 - Audyssey Settings; Late Night Function; Music Optimizer; CinemaFILTER
41 En Audyssey Settings ■ Audyssey See “Audyssey” ( ➔ page 36 ) ■ Dynamic EQ See “Dynamic EQ” ( ➔ page 36 ) ■ Dynamic Volume See “Dynamic Volume” ( ➔ page 37 ). Note • These technologies can be used when all the following conditions are met:– Room Correction and Speaker Setup is completed. Note that...
Page 42 - Controlling Other Components; iPod/iPhone Playback via Onkyo Dock; RI Dock; With the RI Control; DOCK; Without the RI Control; Using the Onkyo Dock
42 En Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound, and watch iPod/iPhone slideshows and videos on your TV. In addition, the onscreen display (OS...
Page 44 - Controlling Other Onkyo Components; Entering Remote Control Codes; REMOTE MODE; REMOTE MODE
44 En Controlling Other Onkyo Components You can use the AV receiver’s remote controller to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc. The following REMOTE MO...
Page 45 - Resetting REMOTE MODE Buttons
45 En You can reset a REMOTE MODE to its default remote control code. You can reset the remote controller to its default settings. By pressing REMOTE MODE that’s been programmed with the remote control code for your component, you can control Onkyo component as below.For details on entering a remote...
Page 47 - Appendix; Troubleshooting; , press and hold down; Power; HOME; Audio
47 En Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The AV receiver turns off unexpectedly ■ When the power is restored after a power i...
Page 48 - Video
48 En ■ Only the front speakers produce sound ■ Only the center speaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The subwoofer produces no sound ■ There’s no sound with a certain signal format ■ Can’t get 5.1 playback ■ The speaker volume canno...
Page 51 - USB Features; • USB mass storage device class (but not always; USB Device Requirements
51 En USB Features • USB mass storage device class (but not always guaranteed). • FAT16 or FAT32 file system format.• Each folder may contain up to 255 music files and folders, and folders may be nested up to 8 levels deep. • USB hubs and USB devices with hub functions are not supported. For and pla...
Page 52 - Connection Tips and Video Signal Path
52 En Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note • The on-screen setup menus ...
Page 53 - About HDMI; , so TVs and displays with; Supported Audio Formats
53 En About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cabl...
Page 54 - For
54 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of th...
Page 55 - HDMI IN 1
55 En ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC) functio...
Page 56 - Specifications; Amplifier Section
56 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: 1 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven of 1%...
Page 57 - Memo
