Page 2 - Important Safety Instructions; W A R N I N G
En- 2 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...
Page 3 - Precautions; For British models; IMPORTANT; For European Models; Declaration of Conformity
En- 3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care ...
Page 4 - Features
En- 4 Features ❑ DAB+/DAB Capability ❑ Digital Outputs (Optical/Coaxial) ❑ 40 FM and 40 DAB+/DAB Preset ❑ FM Digital Output Capability ❑ RDS ❑ Preset Station Naming (Up to 8 Characters) ❑ Automatic/Manual Tuning ❑ FM Mono Mode for Weak Signals ❑ Hi-Rigidity, Anti-Resonant Full Flat Chassis to Preven...
Page 5 - Contents
En- 5 Contents Important Safety Instructions............................ 2 Precautions ......................................................... 3 Features ............................................................. 4 Supplied Accessories ........................................ 6 Installing the B...
Page 6 - Supplied Accessories; Installing the Batteries
En- 6 Supplied Accessories Make sure you have the following accessories: Remote controller (RC-852T) and two batteries (AAA/R03) Audio cable R cable To use R , T-4030 must be connected with an R cable. DAB antenna * In catalogs and on packaging, the letter at the end of the product name indicates th...
Page 7 - Getting to Know the Tuner; PRESET; Front Panel; j k
En- 7 Getting to Know the Tuner For detailed information, see the pages in parentheses. a k ON/STANDBY button (13, 22) b DISPLAY button (18) c BAND button (14, 18) d PRESET a button (15, 20) e PRESET s button (15, 20) f AUTO SCAN button (16) g PS/RT/PTY button (17, 20) h MEMORY button (15, 16) i TUN...
Page 8 - —Continued; POWER CODE; Tuning indicators; Rear Panel
En- 8 Getting to Know the Tuner —Continued For detailed information, see the pages in parentheses. a AUDIO OUTPUT jacks (11, 12) b R REMOTE CONTROL jack (11, 12, 13) c DIGITAL OUT COAXIAL and OPTICAL jacks (11, 12) d DAB/FM ANTENNA jack (10) e POWER CODE See “Connecting Antennas”, “Connecting Your C...
Page 9 - Remote Controller
En- 9 Getting to Know the Tuner —Continued For detailed information, see the pages in parentheses. a k button (13) b DIMMER button (21) c DISPLAY button (18) d BAND button (14, 18) e Arrow [ D ]/[ F ]/[ A ]/[ S ] and ENTER buttons (14, 16, 18, 21) f SETUP button (16, 19, 21) g Number buttons (15, 16...
Page 10 - Connecting Antennas; Connecting the DAB/FM Antenna
En- 10 Connecting Antennas This section explains how to connect the supplied DAB/FM antenna.The tuner won’t pick up any radio signals if no antenna is connected, so you must connect the antenna to use the tuner. 1 Screw the supplied DAB/FM antenna’s plug onto the DAB/FM ANTENNA jack. Once your tuner...
Page 11 - Connecting Your Components; Before Making Any Connections; Optical digital audio
En- 11 Connecting Your Components • Refer to the instructions that came with the component you are connecting.• Do not plug in the power cord until all other connections are complete.• Do not bind audio cables with power cords and speaker cables. Doing so may adversely affect the sound quality. • To...
Page 12 - Connecting to an Amplifier
En- 12 Connecting Your Components —Continued Analog Connection Use the supplied audio cable to connect the T-4030’s AUDIO OUTPUT L/R jacks to the LINE IN jacks on your amplifier, as shown. Digital (Optical or Coaxial) Connection Use the digital audio cable to connect the T-4030’s DIGITAL COAXIAL/OPT...
Page 13 - Connecting Onkyo; Connecting the Power Cord
En- 1 3 Connecting Your Components —Continued If you connect the T-4030 to another Onkyo R -capable component with the supplied R cable and audio cable, you can use the following system functions. R cables are special cables solely for use with Onkyo products. Auto Power On When you turn on the T-40...
Page 14 - Listening to the Radio; Auto Tuning; Listening to FM Stations
En- 14 Listening to the Radio With the built-in tuner, you can enjoy FM radiostations. 1 Use the tuner’s [BAND] button, or the remote controller’s [BAND] button to select FM. (Actual display depends on the country.) 2 Press the [TUNING MODE] button or the remote controller’s [MODE] button so that th...
Page 15 - Presetting FM Stations; to select a preset from 1 through 40.
En- 15 Listening to the Radio —Continued ■ Tuning into Stations by Frequency You can tune to FM stations directly by entering the appropriate frequency. 1 Press the remote controller’s [D.TUN] button. (Actual display depends on the country.) 2 Within 8 seconds, use the number buttons to enter the fr...
Page 17 - Using RDS
En- 17 Listening to the Radio —Continued RDS only works in areas where RDS broadcasts are available. When tuned into an RDS station, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data embedded in FM radio signals. It was developed by the E...
Page 18 - Using the Scan Function Manually; Listening to DAB Digital Radio
En- 18 Listening to the Radio —Continued With the built-in tuner, you can enjoy DAB digital radio. 1 Press the tuner’s [BAND] button, or the remote controller’s [BAND] button to select “DAB”. When tuned into a DAB station, the station name will be displayed. 2 Use the TUNING [ a ]/[ s ] buttons to s...
Page 21 - Advanced Setup; “Normal” or “Strong”.; Setting the Display Brightness; Advanced Setup Menu
En- 21 Advanced Setup You can adjust the brightness of the display. 1 Press the remote controller’s [DIMMER] button repeatedly to select: dim, dimmer, or normal brightness. If you weak radio station is frequently received during AutoPreset/Scan, set the “Search Level” setting to “Strong” to receive ...
Page 22 - Troubleshooting; Can’t turn on the tuner; Power
En- 22 Troubleshooting If you have any trouble using the tuner, look for a solution in this section. Can’t turn on the tuner • Make sure that the power cord is plugged into the electric outlet properly. • Unplug the power cord from the electric outlet, wait 5 seconds or more, then plug it in again. ...
Page 23 - Specifications; Tuner Section
En- 2 3 Specifications Tuner Section ■ FM ■ DAB/DAB+ General ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Tuning Frequency Range 87.5 MHz– 108.0 MHz RDS Preset Channel 40 Signal-to-noise ratio Stereo: 60 dB (IHF-A)Mono: 74 dB (IHF-A) THD (total harmonic ...