Page 2 - How to use the remote controller; Before Start
2 About the Basic Manual The Basic Manual leads you through the fundamental steps to enjoy the AV Receiver from connections to TV, speaker system and playback devices, to necessary functions for playback. As well as that, Basic Manual informs you with the instructions on frequently used functions. B...
Page 3 - Connections; Connecting the TV and players; Important; HDMI Cable Connection
Step 1: Connections 3 1 Connecting the TV and players Important : The power cord must be connected only after all other connections are completed. HDMI Cable Connection The unit has many HDMI jacks on its rear panel and each of them corresponds to an input selector button of the same name on the fro...
Page 4 - Connecting Components without HDMI; Audio signal connection; Analog connection; Video signal connection
4 Step 1: Connections r To play 4K or 1080p video, use the high speed HDMI cable. Connecting Components without HDMI If your AV component does not have HDMI jack, use an available jack of your component for cable connection with this unit. Just as the HDMI jacks, other jacks on this unit have a prea...
Page 5 - Connecting speakers
5 Step 1: Connections 2 Connecting speakers Important : The power cord must be connected only after all other connections are completed. 45 12 3 6 1 2 Front speakers 3 Center speaker 4 5 Surround speakers 6 Subwoofer r The position and size of the speakers is an image. r Only one subwoofer can be co...
Page 6 - Other connections
6 Step 1: Connections cable core to the rear panel of the unit may cause failure. Also do not connect two or more cables to one speaker jack or one speaker to several jacks. 3 Other connections AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadca...
Page 7 - Setting Up; Turning the power on; Operation; Making speaker setting
7 Step 2: Setting Up 1 Turning the power on Connect the power cord to the outlet. Press z ON/ STANDBY on the main unit or z RECEIVER on the remote controller to turn the unit on or to standby mode. r When the unit is turned on, a large instantaneous current may flow affecting functionality of the co...
Page 8 - Adjusting volume level of speakers; HDMI Setup; HDMI Through
8 Step 2: Setting Up Move the cursor with d / c buttons and set the distance from each speaker to the listening position. Press HOME to save the changed setting and close the menu screen. r This setting cannot be changed if headphones are connected or audio is output from the speakers of the TV. r T...
Page 9 - Playing Back; Playing the player and TV
9 Step 3: Playing Back 1 Playing the player and TV z To control the unit : The remote controller may be in the remote mode that enables control of other devices. In the state of remote mode, you will not be able to operate this unit. When you operate the unit, operate it from back to (a mode in whic...
Page 10 - Listening modes
10 Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV : You can select a listening mode suitable for movies and TV programs. MUSIC : You can select...
Page 11 - Pairing; Press BLUETOOTH on the remote controller.; Playing sound of the Bluetooth-enabled device; Setup
11 Step 3: Playing Back 3 Connecting and playing the Bluetooth-enabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is |HGGV|OGVGTU r The Bluetooth-enabled device needs to support the A2DP profile. r Note that connection is n...
Page 12 - Using Quick Setup menu
12 Step 3: Playing Back 5 Using Quick Setup menu In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment. 1. Press Q SETUP on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Q u i c k S e t u p I n p u t A ...
Page 13 - Using the multi-zone function; Making multi-zone connection; To control on the main unit; To turn off the multi-zone function
13 Step 3: Playing Back 6 Using the multi-zone function You can listen to the sound in a separate room by making the Zone connection (analog) between the unit and an integrated amplifier placed in the separate room. You can use a Blu-ray Disc player in the main room in which the unit is placed, whil...
Page 14 - Front Panel
14 1 2 3 8 9 F G H J 4 K 5 6 7 I M L P R N O Q (European and Asian models) Front Panel 1 z ON/STANDBY button : Turns the unit on or into standby mode. 2 BLUETOOTH indicator : Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. 3 ZONE 2 button...
Page 15 - F G; Rear Panel
15 1 4 6 8 2 3 5 7 9 F G Rear Panel 1 RI REMOTE CONTROL jack : An Onkyo product with RI jack can be connected and synchronized with this unit. 2 (/#06'00#LCEMŝCPF#/#06'00# terminal : The supplied antennas are connected. 3 USB port : A USB storage device is connected so that music files stored in it ...
Page 16 - Troubleshooting; The AV receiver turns off unexpectedly.; HDMI control does not function correctly.; How to reset; How to reset the remote controller
16 Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. I...
Page 17 - Specifications; Amplifier Section; Video Section
17 Specifications Amplifier Section Rated Output Power All channels: 65 watts minimum continuous power per channel, |QJONQCFUEJCPPGNUFTKXGPHTQO*\VQM*\YKVJC maximum total harmonic distortion of 0.7% (FTC)90 watts minimum continuous power per channel, 6 ohm loads, |EJCPPGNUFTKXGPCVM*\YKVJCOCZKOWOVQVCN...
Page 18 - License and Trademark Information
18 License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DT...
Page 19 - Declaration of Conformity
19 Precautions For European Models Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: – Safety – Limits and methods of measurement of radio disturbance characteristics – Limits for harmonic current emissions – Limitation of voltage cha...
