Onkyo DV-SP506 - User Manual
Onkyo DV-SP506 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – About RIHD-compatible Components; Using RIHD
- Page 3 – ” à la page 21 du; Guide de configuration HDMI du DV-SP506; La norme HDMI vous permet de...; ciant d’un système de conversion de pointe.; Connexion directe à un téléviseur; Connexion à un ampli-tuner AV; Français
- Page 4 – Connexion d’éléments compatibles RIHD; S’il n’y a pas de son via HDMI...
- Page 5 – ” de la página 21 del Manual de Instruccio-; Guía de configuración HDMI del DV-SP506; • Utilizar RIHD (Remote Interactive over HDMI); Conectar directamente a un televisor; Conectar a un receptor de AV; Español
- Page 6 – Acerca de los componentes compatibles con RIHD; Si no hay sonido mediante HDMI...
- Page 7 – Guida al setup HDMI del DV-SP506; funzione di scaling avanzata incorporata.; Collegare direttamente un televisore; Collegare un ricevitore AV; Italiano
- Page 8 – Informazioni sui dispositivi compatibili con RIHD; Utilizzare l’RIHD
- Page 9 – ” wählen (siehe 21 in der Bedienungsanleitung; HDMI-Einrichtungshandbuch für den DV-SP506; HDMI bietet folgende Möglichkeiten:; höherer Qualität gewandelt werden.; Anschließen an einen AV-Receiver; Deutsc
- Page 10 – Über RIHD-fähige Geräte; Verwendung von RIHD
- Page 11 – ” op pagina 21 van de gebruiksaanwijzing voor; ceerde schaalvergroting biedt.; Direct aansluiten op een TV-toestel; Aansluiten op een AV-receiver; Nederland
- Page 12 – Betreffende RIHD-geschikte apparaten; Gebruik van RIHD
- Page 13 – Vägledning för HDMI-anslutning av DV-SP506; inbyggd funktion för avancerad skalning; Anslutning direkt till en teve; Anslutning till en AV-receiver; Svenska
- Page 14 – Angående RIHD-kompatibla komponenter; Användning av RIHD-styrning
- Page 15 – . 只通過一根 HDMI 電纜便可輕鬆連接視頻、音頻和控制信號。; 直接連接至電視機; HDMI 指示燈; 連接至 AV 接收機; 中文
- Page 16 – 關於 RIHD 兼容組件; 對於此處所列之外的其它組件,如果支持 HDMI 標准的 CEC 部分,則也可以提供鏈接式操作,但不能保證。; 使用 RIHD
Video and audio are sent to the TV via the HDMI cable.
Video and audio are sent via the HDMI cables. You can
enjoy better sound by using an AV receiver.
The connection method shown here can be used when
the AV receiver’s HDMI input supports DSD and multi-
channel linear PCM over HDMI. If your AV receiver
supports only CD and DVD-Video playback over HDMI,
you’ll need to use “Connection method
2
” on page 21
of the DV-SP506 Instruction Manual. Refer to the
Instruction Manual for more details.
By default, the HDMI Resolution is set to Auto so that video is automatically output at
a resolution that suits the connected HDMI component. However, if there’s no picture,
try pressing the [RESOLUTION] button on the DV-SP506 or its remote controller.
The HDMI resolution can also be set by using the onscreen setup menus, which can be
displayed by pressing the [SETUP] button. See pages 46 and 50 of the DV-SP506
Instruction Manual for details.
DV-SP506 HDMI Setup Guide
With HDMI you can...
• Easily connect video, audio, and control signals with just one HDMI cable.
• Enjoy high-definition video (1080p/1080i/720p).
• Output 480i/576i video as it is for processing by an AV receiver or TV with advanced scaling built in.
• Enjoy 5.1-channel Dolby Digital and DTS digital surround sound, and multichannel linear PCM
(DVD-Audio) and DSD (SACD).
• Use RIHD (Remote Interactive over HDMI).
Connecting Directly to a TV
HDMI
HDMI
IN
Video
Audio
TV
HDMI indicator
When the DV-SP506 is outputting a signal from its
HDMI OUT, the DV-SP506’s HDMI indicator lights
up. If the indicator does not light up, the HDMI con-
nections are not correct, or a connected HDMI com-
ponent is not turned on. The HDMI indicator flashes
while the DV-SP506 verifies a connected HDMI
component.
RETURN
SETUP
TOP MENU
MENU
CU
RSOR
PU
SH TO ENTE
R
HDMI indicator
Connecting to an AV Receiver
HDMI
HDMI
IN
HDMI
IN
HDMI
Speakers
AV receiver
TV
Video
Audio
Video
Audio
If There’s No Picture via HDMI...
Remote controller
or
DV-SP506
E
n
F
r
E
s
D
e
I
t
N
l
S
v
C
t
Français
Español
Italiano
Deutsc
h
Nederland
Svenska
中文
English
DV-SP506̲Setup̲U8.fm Page 1 Friday, September 5, 2008 3:19 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Onkyo DV-SP506
Summary
By default, the HDMI Audio Out setting is set to Auto so that audio is automatically output in a format that suits the con-nected HDMI component. However, if there’s no sound, you will need to change the HDMI Audio Out setting. See pages 24–26 or page 51 of the DV-SP506 Instruction Manual for detail...
Les signaux vidéo et audio sont transmis au téléviseur par le câble HDMI. Les signaux vidéo et audio sont transmis par les câbles HDMI. Vous obtenez un meilleur son en utilisant un ampli-tuner AV. La méthode de connexion illustrée ici suppose que l’entrée HDMI de l’ampli-tuner AV est compatible avec...
Par défaut, le paramètre “Sortie HDMI” est réglé sur “Automatique”: de cette façon, les signaux vidéo sont transmis automatiquement avec un format convenant à l’élément HDMI branché. S’il n’y a pas de son, il faut cependant changer le réglage “Sortie HDMI”. Voyez les pages 24–26 ou la page 51 du mod...
