Page 2 - Important Safety Instructions; WARNING; AVIS
2 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructi...
Page 3 - Precautions
3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —Occ...
Page 4 - —Continued; This unit is a CLASS 1 LASER PRODUCT and; IMPORTANT; Neutral; Declaration of Conformity
4 Precautions —Continued This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.To prevent being exposed to t...
Page 5 - Features; Amplifier; Supplied Accessories; Make sure you have the following accessories:
5 Features Amplifier • WRAT (Wide Range Amplifier Technology)• High Current, Low Impedance Drive• Discrete Output Stage Circuitry• 2 Audio Inputs and 1 Output• Optimum Gain Volume Circuitry• Subwoofer Pre Out CD Player • Plays CDs, MP3 CDs, CD-Rs and CD-RWs *1 • 25 Track Programming• 2 Repeat Mode (...
Page 6 - Before Using the CD receiver; Installing the Batteries
6 Before Using the CD receiver Notes: • If the remote controller doesn’t work reliably, try replac- ing the batteries. • Don’t mix new and old batteries or different types of bat- teries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from le...
Page 7 - Contents; Getting Started
7 Contents Getting Started Important Safety Instructions .................................... 2Precautions ............................................................... 3Features .................................................................... 5Supplied Accessories ...............................
Page 8 - Getting to Know the CD receiver; Display; Front Panel; bm
8 Getting to Know the CD receiver The page numbers in parentheses show where you can find the main explanation for each item. a STANDBY indicator (22, 24) Lights up in Standby mode. b STANDBY/ON button (24, 48, 51, 54) Sets the CD receiver to On or Standby. c Remote control sensor (6) Receives contr...
Page 9 - bk
9 Getting to Know the CD receiver —Continued a SLEEP indicator Lights up when the Sleep function has been set. b MP3 indicator Lights up when an MP3 file is loaded. c FOLDER indicator Lights up when a folder number or name is being displayed. d DIRECT indicator Lights up when the Direct function is ...
Page 10 - Rear Panel
10 Getting to Know the CD receiver —Continued The page numbers in parentheses show where you can find the main explanation for each item. a MD/TAPE IN/OUT (20, 21) These analog audio inputs and outputs are for con-necting a recorder with an analog input and output, such as a MiniDisc recorder or cas...
Page 11 - Used to set the timers and clock.; Onkyo RI Dock control buttons; Remote Controller
11 Getting to Know the CD receiver —Continued The page numbers in parentheses show where you can find the main explanation for each item. a STANDBY/ON button (24, 48, 51) This button is used to set the CD receiver to On or Standby. b SLEEP button (53) Used to set the Sleep timer, which turns off the...
Page 12 - ENTER button
12 Getting to Know the CD receiver —Continued l Onkyo MD recorder and cassette deck control buttons For twin cassette decks, only Deck B can be con-trolled. m CLOCK CALL button (48) Calls up the clock to display the day and time. n INPUT [ t ]/[ 1 ] buttons (24, 26, 41, 43) Used to select the input ...
Page 13 - Controlling an Onkyo MD recorder, cassette deck, or RI Dock; • When the cassette deck is connected to the MD/TAPE
13 Getting to Know the CD receiver —Continued Controlling an Onkyo MD recorder, cassette deck, or RI Dock Explanation of buttons for using the Onkyo MD recorder, cassette deck, or RI Dock, when connected to the MD/TAPE jack or DOCK IN jack of the CD receiver. • See pages 20-22 for instructions on co...
Page 14 - Disc Notes; Supported Discs
14 Disc Notes Supported Discs The CD receiver supports the following discs. • Some audio CDs use copy protection that doesn’t con- form to the official CD standard. Since these are non-standard discs, they may not play properly in the CD receiver. • The CD receiver supports 8 cm and 12 cm discs.• Th...
Page 15 - Disc Content Organization
15 Disc Notes —Continued • The following ID3 tags are supported: versions 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not sup-ported. Normally, version 2.2/2.3/2.4 tags have prior-ity and will be displayed. • For ID3 version 2 tags, the tag information recognized will be those embedded in th...
Page 16 - Connecting Antennas; Connecting the Indoor FM Antenna; The supplied indoor FM antenna is for indoor use only.; Connecting the AM Loop Antenna
16 Connecting Antennas This section explains how to connect the supplied indoor FM antenna, AM loop antenna, and DAB antenna, and how to connect commercially available outdoor FM and AM antennas.The CD receiver won’t pick up any radio signals without an antenna connected, so you must connect the ant...
Page 17 - Connecting the DAB Antenna
17 Connecting Antennas —Continued Connecting the DAB Antenna Connecting an Outdoor FM Antenna If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out-door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can som...
Page 18 - Connecting Speakers; Connecting Your Speakers; • Connect only speakers with an impedance of between; —Terminal posts—
18 Connecting Speakers Connecting Your Speakers • Connect the right speaker to the CD receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left (L) SPEAKERS terminals. • Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receive...
Page 19 - Connecting Other Components; • Before making any connections, read the manuals; Connection Color Coding; • Push plugs in all the way to make; About Connections; Connecting a Subwoofer
19 Connecting Other Components • Before making any connections, read the manuals supplied with your other components. • Don’t connect the power cord until you’ve completed and double-checked all connections. Connection Color Coding RCA-type audio connections are usually color-coded: red and white. U...
Page 20 - What can you do with; Connecting an Onkyo Cassette Deck
20 Connecting Other Components —Continued The following diagram shows how to connect an optional Onkyo cassette deck.Connect the CD receiver’s MD/TAPE OUT jacks to the cassette deck’s INPUT (REC) jacks, and connect the CD receiver’s MD/TAPE IN jacks to the cassette deck’s OUTPUT (PLAY) jacks. What c...
Page 21 - Connecting an Onkyo MD recorder
21 Connecting Other Components —Continued The following diagram shows how to connect an optional Onkyo MD recorder. Connect the CD receiver’s MD/TAPE OUT jacks to the MD recorder’s INPUT (REC) jacks, and connect the CD receiver’s MD/TAPE IN jacks to the MD recorder’s OUTPUT (PLAY) jacks. What can yo...
Page 22 - Connecting the Power Cord; Plug the power cord into a suitable wall outlet.; Connecting an Onkyo RI Dock (Remote Interactive Dock)
22 Connecting Other Components —Continued The following diagram shows how to connect an optional Onkyo RI Dock (Remote Interactive Dock).Connect the CD receiver’s DOCK IN jacks to the RI Dock’s AUDIO OUT jacks. What can you do with u ? • Connecting an Onkyo RI Dock to the CD receiver with an u cable...
Page 23 - First Time Setup; Turning Off the AccuClock Function; Setting the Clock with the AccuClock Function; ENTER
23 First Time Setup To use the AccuClock function, the CD receiver must be able to receive RDS radio stations, which means an FM antenna must be connected. Be sure to connect an FM antenna before attempting to use this function (see page 16).The very first time you turn on the CD receiver, the AccuC...
Page 24 - Basic Operations; CD; VOLUME; Turning On the CD receiver
24 Basic Operations To turn on the CD receiver, press the [STANDBY/ON] button on the CD receiver or remote controller. The STANDBY indicator goes off.Press the [STANDBY/ON] button again to set the CD receiver to Standby. The STANDBY indicator lights up. Tip: When you start playback on (or turn on) a...
Page 25 - MUTING; Adjusting the Bass and Treble; ] buttons to adjust the; Using the Super Bass Function; Using the Direct Function
25 Basic Operations —Continued To turn on the Super Bass func-tion, press the [S.BASS] button. The S.BASS indicator lights up.To turn off the Super Bass function, press the [S.BASS] button again. Note: If you press the [S.BASS] button while the Direct function is on, the Direct function will be turn...
Page 26 - -capable component, it’s important that you; Input Source Name Abbreviations; Changing the Input Display; ] button to select the; “Complete” appears on the display.
26 Basic Operations —Continued You can choose what name is displayed when an input source is selected so that it matches the type of component that you’ve connected to the MD/TAPE IN. When you connect an Onkyo u -capable component, it’s important that you select the input source name that matches th...
Page 27 - Playing CDs; Selecting Tracks; to open the disc tray.; • Audio CD Display; • MP3 CD Display
27 Playing CDs Selecting Tracks To return to the beginning of the track currently playing, press the Previous [ 7 ] button. Press the Previous [ 7 ] button repeatedly to select earlier tracks. • While playback is stopped, pressing the Previous [ 7 ] button will select the previous track. Press the N...
Page 28 - Using the Remote Controller; Displaying CD Information; “REMAIN”
28 Playing CDs —Continued During playback or while playback is paused, press the remote controller’s [DISPLAY] button repeatedly to display the following CD information. Note: You can also use the CD receiver’s [DISPLAY] button to display this information. Using the Remote Controller To select: Use ...
Page 29 - Navigation mode; Selecting MP3 Files in Navigation Mode; Selecting/Playing MP3 Files; FOLDER; ] buttons to select the files
29 Playing CDs —Continued On an MP3 CD, MP3 files may be organized in a hierar-chically, with folders containing files and subfolders, as shown below. On the CD receiver, there are two modes for selecting MP3 files: Navigation mode and All Folder mode . In Navigation mode, you can select MP3 files b...
Page 30 - Selecting MP3 Files in All Folder Mode; ] buttons to select the MP3 files within that; Pausing Playback; ] buttons to select the; buttons to select it.
30 Playing CDs —Continued Selecting MP3 Files in All Folder Mode With All Folder mode, you don’t have to navigate the folder hierarchy because all folders that contain MP3 files appear at the same level.If random playback is currently selected, press the [YES/MODE] button to cancel it before proceed...
Page 31 - Playing the MP3 Files in Only One Folder; Name of the current MP3 file.; Sampling rate and bit rate:; Sampling rate and bit rate of the current MP3 file.; Displaying MP3 Information; DISPLAY
31 Playing CDs —Continued Playing the MP3 Files in Only One Folder Normally, all of the MP3 files in all of the folders on the disc are played. With 1-folder playback, only the MP3 files in the specified folder are played. You can display various information about the MP3 file currently playing, inc...
Page 32 - Checking What’s on the Playlist; buttons to scroll through the playlist.; Removing Tracks from the Playlist; • While memory playback is stopped, press the; Cancelling Memory Playback; • Memory playback is cancelled when you press the; Memory Playback; CLEAR; To remove tracks from the playlist:
32 Playing CDs —Continued With memory playback, you can create a playlist of up to 25 tracks. Memory playback can be set only when the input source is set to CD and playback is stopped. Selecting Other Tracks During Memory Playback To select other playlist tracks during memory playback, use the remo...
Page 33 - Cancelling Random Playback; • Random playback is cancelled when you press the; Cancelling Repeat Playback; • Repeat playback is cancelled when you press the; Random Playback; SHUFFLE; Repeat Playback; REPEAT
33 Playing CDs —Continued With random playback, all of the tracks on the disc are played in random order. Random playback can be set only when the input source is set to CD and playback is stopped. Cancelling Random Playback • To cancel random playback, press the [SHUFFLE] button repeatedly until th...
Page 34 - Preferences; Setting MP3 Preferences; MP3 files will be played.
34 Playing CDs —Continued With the MP3 preferences, you can change the way MP3 file information is displayed and the way MP3 CDs are played. The MP3 preferences can be set only when the input source is set to CD and playback is stopped. To cancel the procedure at any point, press the [MENU/NO] butto...
Page 35 - Navigation
35 Playing CDs —Continued The following table shows a few examples of numbered file and folder names and how they will appear with the “Disable” and “Enable” options. Folder Key? This preference determines how the [FOLDER] button works. File/folder name “Hide Number?” Option Disable Enable 01 Pops 0...
Page 36 - Listening to the Radio; When tuned into a station, the Tuned; Tuning into weak stereo FM stations; Tuning into AM/FM Radio Stations; BAND; • Auto Tuning Mode; once a station is; In Manual Tuning mode,; the frequency; through; Adjusting the AM antenna
36 Listening to the Radio When tuned into a station, the Tuned indicator appears. When tuned into a stereo FM station, the FM ST indicator appears as well. Tuning into weak stereo FM stations If the signal from a stereo FM station is weak, it may beimpossible to get good reception. In this case, swi...
Page 37 - RDS stands for; Displaying AM/FM Radio Information; Receiving RDS
37 Listening to the Radio —Continued Press the remote controller’s [DISPLAY] button repeatedly to display more radio information. You can also use the CD receiver’s [DISPLAY] button to display this information. RDS is only in areas where RDS broadcasts are avail-able. What is RDS? RDS stands for Rad...
Page 38 - Selecting DAB for the Very First Time; Listening to DAB Digital Radio; indicator appears and the
38 Listening to the Radio —Continued Selecting DAB for the Very First Time The very first time you select DAB, the Auto Tuning function automatically scans the DAB Band III for the multiplexes (i.e., stations) available in your area. Once the scanning process is complete, the first station that was ...
Page 39 - Selecting DAB Stations; Favorite
39 Listening to the Radio —Continued Selecting DAB Stations • You can also use the CD receiver’s PRESET [ t ]/[ 1 ] button to select the DAB stations. The operation of the PRESET [ t ]/[ 1 ] buttons can be changed.Press and hold the Stop [ 2 ] button for 3 seconds until “Preset Mode” or “Station Mod...
Page 40 - DAB Setup; The items are explained below.; Alphabet; Sort stations alphabetically.; Multiplex; Sort stations by multiplex.; reduction
40 Listening to the Radio —Continued DAB Setup Use the following functions and settings to set up DAB digital radio. ■ Preset Write? Select this to preset the current DAB station. See “Pre-setting AM/FM/DAB Stations Manually” on page 42 for more information. ■ Tuning Mode? With this setting, you can...
Page 41 - After Storing Presets You Can:; Presetting FM Stations Automatically (Auto Preset); ] buttons repeatedly until
41 Listening to the Radio —Continued With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change station...
Page 42 - • You can store up to 40 stations as presets and this can be any; About Presets
42 Listening to the Radio —Continued With the Preset Write function, you can manually preset individual AM, FM and DAB radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also b...
Page 43 - You can also use the front panel controls.; to select a; Selecting Preset Stations; ] buttons to select a
43 Listening to the Radio —Continued You must store some presets before you can select them (see pages 41 and 42). You can also use the front panel controls. 1. Use the [INPUT] button to select “AM”, “FM” or “DAB”. 2. Use the PRESET [ t ]/[ 1 ] buttons * to select a preset. * When selecting DAB pres...
Page 44 - Available Characters; Naming Presets; • Selecting numbers and; • Editing characters:
44 Listening to the Radio —Continued You can name presets for easy identification. The preset name may contain of up to eight characters. Available Characters Naming Presets 1 Select the preset you want to name (see page 43). 2 Press the [MENU/NO] button, and then use the Previous and Next [ 7 ]/[ 6...
Page 45 - Copying Presets
45 Listening to the Radio —Continued With the Preset Copy function, you can organize your presets in the order you want. When you copy a preset, its name is also copied. Tip: If you favorite station is stored in preset #5 and you want to make it preset #1, copy preset #5 to preset #1. To keep the st...
Page 46 - Erasing a Preset’s Name
46 Listening to the Radio —Continued Erasing a Preset’s Name 1 Select the preset whose name you want to erase (see page 43). 2 Press the [MENU/NO] button, and then use the Previous and Next [ 7 ]/[ 6 ] buttons to select “NameErase?”. 3 To erase the preset’s name, press the [YES/MODE] button. The pre...
Page 47 - Setting the Clock; Setting AccuClock to Use a Specific Station; The frequency flashes on the display.; ] buttons to tune into
47 Setting the Clock The AccuClock function normally uses the FM station with the strongest signal to set the clock. However, if the clock cannot be set properly using that station, you can specify which FM station the AccuClock function should use. This must be an FM station that supports RDS CT (C...
Page 48 - Displaying the Day and Time; Setting the Clock Manually; TIMER; Use the Previous and Next [; button to select AM or
48 Setting the Clock —Continued The time can be displayed in either 12- or 24-hour for-mat. Displaying the Day and Time To display the day and time, press the remote controller’s [CLOCK CALL] button.If the CD receiver is on Standby, the time is displayed for 8 seconds. Using the 12- or 24-hour Forma...
Page 49 - Using the Timers; About the Timers
49 Using the Timers The CD receiver has five timers: four programmable tim-ers for automated playback or recording, and a sleep timer for turning the CD receiver off after a specified period.The timers can be used with other Onkyo components that are connected to the CD receiver via u (see pages 20 ...
Page 50 - Programming the Timers; You can select the following sources:
50 Using the Timers —Continued Notes: • You must set the clock before you can program the tim- ers. • Before programming a timer to turn on the radio, you must preset the station you want to use. (See pages 41 and 42.) • If you don’t operate any buttons for 60 seconds while pro- gramming a timer, th...
Page 51 - You can select the following:
51 Using the Timers —Continued To return to step 1 and start timer programming all over again, press the [MENU/NO] button at any point in this procedure. 8 If you selected “Every”, use the Previous and Next [ 7 ]/[ 6 ] buttons to select the day, “Every-day”, or “Days Set”, and then press [ENTER]. Yo...
Page 52 - Turning Timers On and Off; Checking Timer Settings
52 Using the Timers —Continued Once a timer has been programmed, you can turn it on or off as necessary. For example, while you’re on holiday, you may want to turn off the timer you use as an early-morning alarm. Turning Timers On and Off 1 Press the [TIMER] button repeat-edly to select Timer 1, 2, ...
Page 53 - Checking the Remaining Sleep Time; Using the Sleep Timer; SLEEP
53 Using the Timers —Continued With the sleep timer, you can set the CD receiver so that it automatically turns off after a specified period. Checking the Remaining Sleep Time To check the remaining sleep time, press the [SLEEP] button.Note that if you press the [SLEEP] button while the sleep time i...
Page 54 - Troubleshooting; matically after a specified period.
54 Troubleshooting If you have any trouble using the CD receiver, look for a solution in this section. Can’t turn on the CD receiver. • Make sure that the power cord is properly plugged into the wall outlet (see page 22).• Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug...
Page 55 - • Use the Rewind and Fast Forward [
55 Troubleshooting —Continued Audio performance • Audio performance will be at its best about 10 to 30 minutes after the CD receiver has been turned on and had time to warm up. • Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality, so don’t do it. Playb...
Page 56 - • Make sure the
56 Troubleshooting —Continued Interactive control with other Onkyo u -capable components is not working. • Make sure the u cables and analog audio cables are connected correctly (see pages 20 to 22). Connecting only an u cable won’t work. • Make sure the Input Display matches the type of device that...
Page 57 - Specifications; General; Amplifier Section
57 Specifications Specifications and features are subject to change without notice. General Power Supply: AC 220 - 230 V, 50/60 Hz Power Consumption: 58 W Stand-by Power Consumption: 0.25 W Dimensions(W × H × D): 205 × 116 × 367 mm Weight: 4.0 kg Audio Inputs Analog Inputs: 2 (DOCK IN, MD/TAPE IN) A...
Page 58 - Memo
