Nutone QTXEN110FLT - Manual

NuTone, Inc.,

4820 Red Bank Road, Cincinnai, OH 45227 (1-800-543-8687)

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted by

Date

Architectural & Engineering Specifications

March 2007

QTXEN Series

Fan/Light/Night Lights

MODELS QTXEN080FLT,

QTXEN110FLT, QTXEN150FLT

ARCHITECT’S SPECIFICATION

• Ceiling Ventilator shall be NuTone Model QTXEN080FLT

(QTXEN110FLT) (QTXEN150FLT).

• Ceiling Ventilator shall have corrosion resistant galvanized steel

housing with four-point mounting capability. It shall be ducted to

a roof or wall cap using 6” round ductwork.

• Blower assembly shall be removable, have a centrifugal-type

blower wheel and a permanently lubricated motor designed for

continuous operation and mounted with resilient anti-vibration

mounts.

• Non-metallic damper/duct connector shall be included.
• Lamp shall be 42W fluorescent * with separate 4W night light.
• Air delivery shall be no less than 80 (110) (150) CFM and sound

level no greater than 0.3 (0.7) (1.4) Sones. All air and sound

ratings shall be certified by HVI.

• Ceiling ventilator shall be Energy Star® qualified and have an

energy efficient permanent split capacitor motor.

• Ceiling Ventilator shall be U.L. Listed for use in insulated ceilings

(Type I.C.) and for use over bathtubs and showers when connected

to a GFCI protected branch circuit.

70C

99043815D

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for

continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Maintains a high percentage of rated CFM in less than ideal

installations

• Low RPM for quiet operation

• Resilient anti-vibration motor mounts
HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• 6” round ducting for superior performance

• Polymeric duct connector with tapered sleeve and no metallic

clatter

• 7-5/8” height allows for 2” x 8” (nominal) joist installations

• Sturdy, easy, four-point mounting directly to joist

• Includes unique spacer (patent pending) for mounting to

engineered “I” joists

• Includes hanger bars to position housing anywhere between

16” to 24”-on-center joists

• Two sets of mounting holes for hanger bars allow flush

installation with bottom or top of drywall

• Can be mounted in ceilings up to 12/12 pitch
GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

• 42W fluorescent lamp * (bulb included) and 4W night light

(bulb not included)

• Durable steel reflector with white enamel finish
CONTROLS (Purchase separately):

• Refer to NuTone’s catalog for a complete line of accessories

to effectively adapt these fans to your construction

requirements.

U.L. Listed for use over bathtubs and showers when connected

to a GFCI protected branch circuit (ceiling mount only).
U.L. Listed for use in insulated ceilings (TYPE I.C.)
California Title 24 compliant.
3-Year Warranty

INSTALLATION

Complete installation instructions are included with each Fan /
Light / Night Light.

* Use only one of the following 42W fluorescent lamps:

G.E.

F42TBX/835/A/ECO or F42TBX/830/A/ECO or F42TBX/827/A/ECO

PHILIPS

PL-T 42W/35/4P/ALTO or PL-T 42W/30/4P/ALTO or PL-T 42W/27/4P/ALTO

SYLVANIA

CF42DT/E/IN/835 or CF42DT/E/IN/830 or CF42DT/E/IN/827

NEMA Type

CFTR42W/GX24q/835 or CFTR42W/GX24q/830 or CFTR42W/GX24q/827

Broan

99271358