Nutone QTREN080 - Manual
Nutone QTREN080 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
NuTone, Inc.,
4820 Red Bank Road, Cincinnai, OH 45227 (1-800-543-8687)
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Architectural & Engineering Specifications
March 2006
QTREN
Series Fans
MODELS QTREN080, QTREN110
ARCHITECT’S SPECIFICATION
• Ceiling Ventilator shall be NuTone Model QTREN080
(QTREN110).
• Ceiling Ventilator shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted to
a roof or wall cap using 4” round ductwork.
• Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed for
continuous operation and mounted with resilient anti-vibration
mounts.
• Non-metallic damper/duct connector shall be included.
• Air delivery shall be no less than 80 (110) CFM and sound level
no greater than 0.8 (1.3) Sones. All air and sound ratings shall be
certified by HVI.
• Ceiling ventilator shall be Energy Star® qualified and have an
energy efficient permanent split capacitor motor.
• Ceiling Ventilator shall be U.L. Listed for use over bathtubs and
showers when connected to a GFCI protected branch circuit.
60F
99043663E
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for quiet,
efficient performance
• Low RPM for quiet operation
• Resilient anti-vibration motor mounts
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” round duct connector with tapered sleeve and no
metallic clatter
• 7-5/8” height allows for 2” x 8” (nominal) joist installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique spacer (patent pending) for mounting to
engineered “I” joists
• Includes hanger bars to position housing anywhere between
16” to 24”-on-center joists
• Two sets of mounting holes for hanger bars allow flush
installation with bottom or top of drywall
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories
to effectively adapt these fans to your construction
requirements.
U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only).
3-Year Warranty
INSTALLATION
Complete installation instructions are included with each Fan.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.