Nutone qt700 - Manual
Nutone qt700 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CERTIFIED TEST DATA
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in AMCA's
state-of-the-art test laboratory. Sones are a measure of
humanly-perceived loudness, based on laboratory
measurements.
This NuTone model is listed by Underwriters'
Laboratories Inc. and Certified by the Canadian Standards
Association (CSA.)
Architectural & Engineering Specifications
March 2004
QuieTTest Twin
Blower Ventilator
(For Ceiling Use)
MODEL: QT700
DESCRIPTION
•
Large capacity NuTone QuieTTest ventilation unit for
light commercial or large residential settings. Also
for in-line use as part of a central ventilation system.
•
Corrosion resistant galvanized steel fan housing is
lined with sound-deadening foam for quiet operation.
•
Motor and twin blowers dynamically balanced
for smooth, quiet operation.
•
Vents horizontally or vertically with 6" x 19" duct.
Duct collar with quiet backdraft damper included.
•
Slots on housing sides provide alternative
mounting methods.
•
Wiring knockouts located on the top and back
of the housing.
•
NuTone wall switch sold separately.
•
Refer to NuTone's catalog for a complete line
of accessories to effectively adapt this fan to your
construction requirements.
DESIGN FEATURES
Air Delivery:
Vented Horizontally:
720 CFM
(340 L/s) at .1"(25 Pa) S.P.
Vented Vertically:
730 CFM
(345 L/s) at .1"(25 Pa) S.P.
Sound Level:
Vented Horizontally:
5.0 Sones.
Vented Vertically:
5.0 Sones.
Dimensions:
Housing:
21
11
⁄
16
" L x 15
7
⁄
16
" W x
14
7
⁄
16
" D.
Grille:
23
3
⁄
8
" L x 17
1
⁄
8
" W.
Material & Finish: Housing:
.033 (20 gauge) galvanized
steel with sound-deadening foam
lining.
Grille:
.0279 (22 gauge) cold rolled
steel with white baked enamel finish.
Motor:
1
⁄
13
H.P., 8 Pole Type P.S.C.,
750 RPM, 1.3 amps at 120v, 60 Hz.
Rated for continuous duty.
Blower Wheel:
Two (2)
1
⁄
2
" bore steel blowers: 1-cw,
1-ccw. 7
43
⁄
64
" O.D. x 4" deep.
Duct Size:
6" x 19". Duct collar with damper
included.
INSTALLATION
•
Not for use in kitchens.
•
Unit is designed for optional mounting methods in a
ceiling application utilizing slotted mounting brackets.
•
Grille attaches with screws.
•
Controls purchased separately.
•
Installation Instructions are provided with each unit.
ARCHITECT'S SPECIFICATIONS
Twin-Blower Ventilator shall be NuTone Model QT700
as manufactured by NuTone according to listed
specifications. Unit shall ventilate 720 CFM vented
horizontally or 730 CFM vented vertically at .1" S.P.
at a sound level rating of 5.0 sones vented horizontally
or vertically.
Housing shall be 21
11
⁄
16
" long x 15
7
⁄
16
" wide x 14
7
⁄
16
" deep
and shall connect to 6" x 19" duct.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
